Search NASA⌕ Search

Engineering topics

Cawkwell, Marc Jon

Publications and source records attributed to Cawkwell, Marc Jon.

At least 19 records

VIPIR: A High-Throughput Drop-Weight Impact Instrument for Imaging the Initiation and Propagation of Reactions in Energetic Materials

Characterizing the handling safety and sensitivity of explosives has been a challenging area of study for over 60 years. Historically one of the most accessible and widely utilized experiments has been the drop-weight impact test, which involves dropping a weight on a small sample sandwiched between two anvils. Because this experiment generally only utilizes sound thresholds to determine whether or not a sample reacted, the physical and chemical properties governing sensitivity remain convolved. Better understanding of chemical and material characteristics is needed to give the chemistry and engineering communities a predictive tool to determine the handling sensitivity of explosives prior to pursuing expensive and potentially hazardous synthesis and formulation operations. Here, we are developing a high throughput drop tower instrument capable of imaging the deformation and flow of energetic materials during impact and the resulting thermal ignition and propagation events. This instrument is based on previous designs but has been modified for higher throughput and tailorable modifications in the future. Herein, we present key design features that enable high-speed visible and thermal imaging of explosive initiation by sub-shock impacts, as well as preliminary results in which ignition sites were observed in an erythritol tetranitrate sample.

47 OTHER INSTRUMENTATION↗

Eulerian finite element simulations of the drop weight impact test with a dislocation Density-based continuum model

During a drop weight impact test, the kinetic energy of the falling weight is transferred into the sample resting on the anvil. The plastic deformation in the sample is an important mechanism for the dissipation of the input kinetic energy. We use Eulerian finite element analysis to simulate the deformation and temperature evolution in a 1,3,5-trinitro-1,3,5-triazine (RDX) sample consisting of multiple crystals. In Eulerian finite element simulations, the mesh moves relative to the material. After every change of position between the mesh and the material, the state variables are interpolated to the new mesh position, i.e., advection. In an effort to reduce the advection errors, we use a rate form of a dislocation density-based continuum model by Luscher et al. Here, the simulations predict localization of plastic deformation, and plastic dissipation as a significant source of heat generation.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗

Thermal conductivity tensor of γ and ε -hexanitrohexaazaisowurtzitane as a function of pressure and temperature

Using reverse non-equilibrium molecular dynamics simulations, we have determined the dependences on temperature and pressure of the thermal conductivity tensors for the monoclinic γ and ε polymorphs of hexanitrohexaazaisowurtzitane (HNIW or CL20). In this work, a recently developed non-reactive force field [X. Bidault and S. Chaudhuri, RSC Adv. 9, 39649–39661 (2019)], designed to study polymorphism and phase transitions in CL20, is employed. The effects of temperature and pressure are investigated between 200 and 500 K and up to 0.5 GPa for γ-CL20 and 2 GPa for ε-CL20. In order to obtain the full thermal conductivity tensor, $κ_{ij}$, for the monoclinic crystals, four distinct heat propagation directions are used. We find that $κ_{ij}$ for both polymorphs is more isotropic than for other energetic molecular crystals, including α- and γ-RDX, β-HMX, and PETN, with a maximum difference of 9.8% between orientations observed at 300 K and 0 GPa for γ-CL20 and a maximum difference of 4.8% for ε-CL20. The average thermal conductivity, $\bar{κ}$, of ε-CL20 is 6.4% larger than that of γ-CL20 at 300 K and 0 GPa. Analytic linear functions of the inverse temperature and the pressure are provided, which fit the data well and can be used to predict the thermal conductivity of both polymorphs for any orientation, pressure, and temperature in and around the fitting range. Our predictions agree reasonably well with the limited available experimental data, for which the polymorph type is unknown.

36 MATERIALS SCIENCE↗

The effect of hardness on polymer-bonded pentaerythritol tetranitrate (PETN) explosive impact sensitivity

Handling sensitivity is an important property to assess when working with explosive samples and can be measured using a variety of tests, including drop-weight impact sensitivity. There exists a longstanding interest in the explosives community on the importance of measurable chemical, physical, and mechanical properties of explosives in impact sensitivity. However, most recent work in this area has explored chemical attributes rather than physical and mechanical properties of explosives. In this study, we measure hardness of explosive samples of pentaerythritol tetranitrate and Sylgard binder (XTX) during the curing process. The samples have been characterized for particle morphology through scanning electron microscopy and handling sensitivity through drop-weight impact testing. The relative importance of states of cure, methods of curing, morphology, and age of material are discussed. The data indicate that although there is a notable difference in morphology and mechanical properties for the samples as the polymer-bonded mixtures cure, the resulting changes to mechanical properties have a minimal effect on the sensitivity of the XTX.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Thermal conductivity tensor of β -1,3,5,7-tetranitro-1,3,5,7-tetrazoctane ( β -HMX) as a function of pressure and temperature

Here, we have used reverse non-equilibrium molecular dynamics (RNEMD) simulations to determine the full thermal conductivity tensor for the monoclinic high explosive crystal β-1,3,5,7-tetranitro-1,3,5,7-tetrazoctane (β-HMX). In order to do so for the monoclinic crystal, four directions for heat propagation are used. Effects of the temperature and pressure are investigated between 200 and 500 K and 0 and 5 GPa, respectively, which approximately covers the range where the β polymorph is stable. Simulations are carried out with the Smith–Bharadwaj non-reactive empirical potential [Smith and Bharadwaj, J. Phys. Chem. B 103, 3570 (1999)], which is known to reproduce well the thermo-elastic properties of HMX. Our results indicate that the thermal conductivity, κ, is highly anisotropic, with 36% difference between the two extreme values at 300 K and 0 GPa. A simple function is used to interpolate κ in the pressure-temperature regime considered in this study, which can be used in continuum models. The results from RNEMD simulations compare well with available experimental results from the literature and allow the determination of κ for any direction and temperature and pressure within or around the fitting interval.

71 CLASSICAL AND QUANTUM MECHANICS, GENERAL PHYSIC↗

Atom Equivalent Energies for the Rapid Estimation of the Heat of Formation of Explosive Molecules from Density Functional Tight Binding Theory

Atom equivalent energies have been derived from which the gas-phase heat of formation of explosive molecules can be estimated from fast, semiempirical density functional tight binding total energy calculations. The root-mean-square deviation and maximum deviation of the heats of formation from the experimental values for the set of 45 energetic molecules compiled by Byrd and Rice [ J. Phys. Chem. A, 2006, 110, 1005–1013] are 10.4 and 25.5 kcal/mol, respectively, using 4 atom equivalent energies and 7.4 and 15.0 kcal/mol, respectively, using 7 atom equivalent energies. These errors are around a factor of 2–3 larger than those obtained from density functional theory calculations but are smaller than those obtained from other semiempirical electronic structure methods. Heats of formation calculated with density functional tight binding theory using the 4 and 7 atom equivalent energies, the Byrd and Rice scheme, and the atom pair contribution method for a new set of 531 energetic molecules that contain only carbon, hydrogen, nitrogen, and oxygen are provided.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Shock to detonation transition of pentaerythritol tetranitrate (PETN) initially pressed to 1.65 g/cm 3

A novel set of experiments and reactive flow modeling of pentaerythritol tetranitrate (PETN) is presented. In this work, the specific phenomenon of shock to detonation transition is examined, where an initial, relatively weak shock is propagated into pressed PETN powder at 1.65 g/cm 3 and the subsequent buildup to detonation is observed experimentally. These experiments, in conjunction with reactant and products’ equations of state, are utilized for building reactive flow models.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Complete Equations of State for Cyclotetramethylene Tetranitramine

Complete equations of state for the volumetric deformation of the β-polymorph of cyclotetramethylene tetranitramine (β-HMX) have been derived from its Helmholtz free energy. Dispersion-corrected density functional theory calculations were used to compute the dependence of the frequencies of the vibrational normal modes on specific volume. Here, the normal mode frequencies were used directly to generate both a tabular equation of state and an approximate model where the sum over normal mode frequencies is replaced by a set of five Debye models.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Modeling Microstructural Effects on Heterogeneous Temperature Fields within Polycrystalline Explosives

The paper addresses the role of crystal anisotropy on the evolution of heterogeneous temperature fields in plastic-bonded explosives (PBXs) under conditions of weak shock. The modeling approach is based on simplified idealizations of PBX microstructure including RDX grains and estane binder regions subjected to velocity boundary conditions representative of impact conditions in situ. The constitutive description of the microstructure constituents includes a dislocation-based, anisotropic, single crystal plasticity model for the explosive grains and a linear viscoelastic model to represent the estane binder. Large suites of simulations were used to systematically study the correlation in heating of the grains with local wave dynamics, crystal orientation, and the microstructural neighborhood. These correlations were identified through the selection of characteristics of crystal anisotropy including oriented wave speeds and Taylor factor. A key observation is that the wave dispersion within a certain distance from the impact interface plays a dominant role in the temperature field. Beyond this distance, individual crystal orientations play a more dominant role, but cannot entirely account for the observed heterogeneity without consideration of the local microstructure neighborhood.

42 ENGINEERING↗

Single Crystal Plasticity Model with Deformation Twinning for the High Rate Deformation of β-HMX

Deformation twinning is an active deformation mechanism during loading along certain crystallographic directions of β-cyclotetramethylene tetranitramine (β-HMX). In this work, a finite strain thermomechanical model is extended to include twinning as a deformation mechanism in addition to plastic slip. The stress is derived from the free energy expression including a term representing the equation of state. The crystal plasticity framework is used to divide the total strain into inelastic and elastic component, where the elastic part is used in the expression for the free energy. The twin systems are treated as pseudo slip systems and the shear rate on the twin systems is evaluated in terms of the twin resistance and the projection of the stress tensor. The model parameters were calibrated against a set of plate impact experiments performed on β-HMX by Dick et al. The remaining plate impact experiments are used to evaluate the predictive capability of the model. The quality of the model fits and predictions is discussed from a physical and modeling perspective. Particularly, the role of twin modeling on results is highlighted. Finally, the model is used to explore the relationship between the propensity for twinning and crystal orientation.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗

Insight into the Chemistry of PETN Under Shock Compression Through Ultrafast Broadband Mid-Infrared Absorption Spectroscopy

In this study, thin films of pentaerythritol tetranitrate (PETN) were shock compressed using the laser driven shock apparatus at Los Alamos National Laboratory (LANL). Two spectroscopic probes were available to this apparatus: visible white light transient absorption spectroscopy (VIS) from 400 to 700 nm and mid-infrared transient absorption spectroscopy (MIR) from 1150 to 3800 cm –1 . Important PETN vibrational modes are the symmetric and antisymmetric NO 2 stretches at 1280 and 1650 cm –1 , respectively, as well as CH stretches at ~2900 cm –1 . Shock strength was varied from approximately 3 to 55 GPa to span from the chemically unreactive regime to the regime in which fast chemical reaction took place on the 250 ps time scale of the measurements. VIS and MIR results suggest irreversible chemistry was induced in PETN at pressures above 30 GPa. At lower shock pressures, the spectroscopy showed minimal changes attributable to pressure induced effects. Under the higher-pressure reactive conditions, the frequency region at the antisymmetric NO 2 stretch mode had a significantly increased absorption while the region around the symmetric NO 2 stretch did not. No observable increased absorption occurred in the higher frequency regions where CH-, NH-, and OH- bond absorptions would be observed. A broad absorption appeared on the shoulder at the red-edge of the CO 2 vibrational band around 2200 cm –1 . In addition to the experiments, reactive molecular dynamics were carried out under equivalent shock conditions to correlate the evolution of the infrared spectrum to molecular processes. The simulations show results consistent to experiments up to 30 GPa but suggest that NO and NO 2 related features provided the strongest contributions to the shocked infrared changes. Proposed mechanisms for shocked PETN chemistry are analyzed as consistent or inconsistent with the data presented here. Our experimental data suggests C≡O or N 2 O bond formation, nitrite formation, and absence of significant hydroxyl or amine concentrations in the initial chemistry steps in PETN shocked above 30 GPa.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Development of Density Functional Tight-Binding Parameters Using Relative Energy Fitting and Particle Swarm Optimization

We provide a strategy to optimize density functional tight-binding (DFTB) parameterization for the calculation of the structures and properties of organic molecules consisting of hydrogen, carbon, nitrogen, and oxygen. We utilize an objective function based on similarity measurements and the Particle Swarm Optimization (PSO) method to find an optimal set of parameters. This objective function considers not only the common DFTB descriptors of binding energies and atomic forces but also incorporates relative energies of isomers into the fitting procedure for more chemistry-driven results. The quality in the description of the binding energies and atomic forces is measured based on the Ballester similarity index and relative energies through a similarity index induced by the Levenshtein edit distance to quantify the correct energetic order of isomers. Training and testing datasets were created to include all relevant chemical functional groups. Finally, the accuracy of this strategy is assessed, and its range of applicability is discussed by comparison against our previous parameterization. The improved performance of the new DFTB parameterization is validated with respect to the density functional theory large datasets QM-9 and ANI-1, where excellent agreement is found between the structures and properties available in these datasets, and the ones obtained with DFTB.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Interpreting Experimental Results from Shock Impacts on Single Crystal PETN in the Context of Continuum Models

Here we interpret previous experimental measurements of impacts on single crystal PETN in the context of a simple continuum model. Hugoniot calculations using the simple model framework under various limiting assumptions envelope measured Hugoniot states reasonably well and suggest that non-negligible deviatoric elastic strains may exist in the shock compressed state for weak impacts. An accompanying simple kinematic model for lattice deformation was used to estimate the expected shifts in X-ray diffraction peaks for the (211) plane under impacts normal to (110) planes. The results suggest that negligible relaxation of the deviatoric lattice deformation occurs on the short (10–20 ns) time and wave propagation (40–80 m) scales of laser-driven shock experiments, and that the corresponding elastic strains may be large. Because of the potentially large deviatoric elastic strains, the specific finite deformation strain measure used within thermomechanical single crystal models is of significant consequence, which is explored numerically by the comparison of isothermal purely elastic responses under uniaxial and simple shear deformations.

36 MATERIALS SCIENCE↗

Parallel replica dynamics simulations of reactions in shock compressed liquid benzene

The study of the long-term evolution of slow chemical reactions is challenging because quantum-based reactive molecular dynamics simulation times are typically limited to hundreds of picoseconds. In this work, the extended Lagrangian Born-Oppenheimer molecular dynamics formalism is used in conjunction with parallel replica dynamics to obtain an accurate tool to describe the long-term chemical dynamics of shock-compressed benzene. Langevin dynamics has been employed at different temperatures to calculate the first reaction times in liquid benzene at pressures and temperatures consistent with its unreacted Hugoniot. Our coupled engine runs for times on the order of nanoseconds (one to two orders of magnitude longer than traditional techniques) and is capable of detecting reactions that are characterized by rates significantly slower than we could study before. At lower pressures and temperatures, we mainly observe Diels-Alder metastable reactions, whereas at higher pressures and temperatures we observe stable polymerization reactions.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Probing ultrafast shock-induced chemistry in liquids using broad-band mid-infrared absorption spectroscopy

We probe shock-induced chemistry in two organic liquids by measuring broadband, midinfrared absorption in the 800–1400 cm –1 frequency range. To test this new method and understand the signatures of chemical reactions in time resolved vibrational spectra, we compared liquid benzene shocked to unreactive conditions (shocked to a pressure of 18 GPa for a duration of 300 ps) to nitromethane under reactive conditions (25 GPa). We see clear signatures of shock-induced chemistry that are distinguishable from the pressure- and temperature-induced changes in vibrational mode shapes. While shocked benzene shows primarily a broadening and shifting of the vibrational modes, the nitromethane vibrational modes vanish once the shock wave enters the liquid and simultaneously, a spectrally broad feature appears that we interpret as the infrared spectrum of the complex mixture of product and intermediate species. To further interpret these measurements, we compare them to reactive quantum molecular dynamics simulations, which gives qualitatively consistent results. As a result, this work demonstrates a promising method for time resolving shock-induced chemistry, illustrating that chemical reactions produce distinct changes in the vibrational spectra.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗