Search NASA⌕ Search

Engineering topics

Cebeci, Tuncer

Publications and source records attributed to Cebeci, Tuncer.

At least 19 records
All sourcesNASA NTRSDOE OSTI
NASA NTRS2007

The Role of Separation Bubbles on the Aerodynamic Characteristics of Airfoils, Including Stall and Post-Stall, at Low Reynolds Numbers

Airfoils at high Reynolds numbers, in general, have small separation bubbles that are usually confined to the leading edge. Since the Reynolds number is large, the turbulence model for the transition region between the laminar and turbulent flow is not important. Furthermore, the onset of transition occurs either at separation or prior to separation and can be predicted satisfactorily by empirical correlations when the incident angle is small and can be assumed to correspond to laminar separation when the correlations do not apply, i.e., at high incidence angles.

Chen, Hsun H.↗
NASA NTRS1992

Prediction of unsteady airfoil flows at large angles of incidence

The effect of the unsteady motion of an airfoil on its stall behavior is of considerable interest to many practical applications including the blades of helicopter rotors and of axial compressors and turbines. Experiments with oscillating airfoils, for example, have shown that the flow can remain attached for angles of attack greater than those which would cause stall to occur in a stationary system. This result appears to stem from the formation of a vortex close to the surface of the airfoil which continues to provide lift. It is also evident that the onset of dynamic stall depends strongly on the airfoil section, and as a result, great care is required in the development of a calculation method which will accurately predict this behavior.

Cebeci, Tuncer↗
NASA NTRS1992

A turbulence model for iced airfoils and its validation

A turbulence model based on the extension of the algebraic eddy viscosity formulation of Cebeci and Smith developed for two dimensional flows over smooth and rough surfaces is described for iced airfoils and validated for computed ice shapes obtained for a range of total temperatures varying from 28 to -15 F. The validation is made with an interactive boundary layer method which uses a panel method to compute the inviscid flow and an inverse finite difference boundary layer method to compute the viscous flow. The interaction between inviscid and viscous flows is established by the use of the Hilbert integral. The calculated drag coefficients compare well with recent experimental data taken at the NASA-Lewis Icing Research Tunnel (IRT) and show that, in general, the drag increase due to ice accretion can be predicted well and efficiently.

Shin, Jaiwon↗
NASA NTRS1992

A turbulence model for iced airfoils and its validation

A turbulence model based on the extension of the algebraic eddy viscosity formulation of Cebeci and Smith developed for two-dimensional flows over smooth and rough surfaces is described for iced airfoils and validated for computed ice shapes obtained for a range of total temperatures varying from 28 to -15 F. The validation is made with an interactive boundary layer method which uses a panel method to compute the inviscid flow and an inverse finite difference boundary layer method to compute the viscous flow. The interaction between inviscid and viscous flows is established by the use of the Hilbert integral. The calculated drag coefficients compare well with recent experimental data taken at the NASA-Lewis Icing Research Tunnel (IRT) and show that, in general, the drag increase due to ice accretion can be predicted well and efficiently.

Shin, Jaiwon↗
NASA NTRS1992

Analysis of iced wings

A method for computing ice shapes along the leading edge of a wing and a method for predicting its aerodynamic performance degradation due to icing is described. Ice shapes are computed using an extension of the LEWICE code which was developed for airfoils. The aerodynamic properties of the iced wing are determined with an interactive scheme in which the solutions of the inviscid flow equations are obtained from a panel method and the solutions of the viscous flow equations are obtained from an inverse three-dimensional finite-difference boundary-layer method. A new interaction law is used to couple the inviscid and viscous flow solutions. The application of the LEWICE wing code to the calculation of ice shapes on a MS-317 swept wing show good agreement with measurements. The interactive boundary layer method is applied to a tapered iced wing in order to study the effect of icing on the aerodynamic properties of the wing at several angles of attack.

Cebeci, Tuncer↗
NASA NTRS1992

Recent progress in the analysis of iced airfoils and wings

Recent work on the analysis of iced airfoils and wings is described. Ice shapes for multielement airfoils and wings are computed using an extension of the LEWICE code that was developed for single airfoils. The aerodynamic properties of the iced wing are determined with an interactive scheme in which the solutions of the inviscid flow equations are obtained from a panel method and the solutions of the viscous flow equations are obtained from an inverse three-dimensional finite-difference boundary-layer method. A new interaction law is used to couple the inviscid and viscous flow solutions. The newly developed LEWICE multielement code is amplified to a high-lift configuration to calculate the ice shapes on the slat and on the main airfoil and on a four-element airfoil. The application of the LEWICE wing code to the calculation of ice shapes on a MS-317 swept wing shows good agreement with measurements. The interactive boundary-layer method is applied to a tapered iced wing in order to study the effect of icing on the aerodynamic properties of the wing at several angles of attack.

Cebeci, Tuncer↗
NASA NTRS1992

An interactive boundary-layer approach to multielement airfoils at high lift

A calculation method based on an interactive boundary-layer approach to multielement airfoils is described and is applied to three types of airfoil configurations with and without flap-wells in order to demonstrate the applicability of the method to general high-lift configurations. This method, well tested for single airfoils as a function of shape, angle of attack, and Reynolds number, is here shown to apply equally well to two-element airfoils and their wakes, to a flap-well region, and to a three-element arrangement which includes the effects of co-flowing regions, a flap well, and the wake of the elements. In addition to providing accurate representation of these flows, the method is general so that its extension to three-dimensional arrangements is likely to provide a practical, accurate and efficient tool to assist the design process.

Cebeci, Tuncer↗
NASA NTRS1991

Prediction of ice shapes and their effect on airfoil performance

Calculations of ice shapes and the resulting drag increases are presented for experimental data on a NACA 0012 airfoil. They were made with a combination of LEWICE and interactive boundary-layer codes for a wide range of conditions which include air speed and temperature, the droplet size and liquid water content of the cloud, and the angle of attack of the airfoil. In all cases, the calculated results account for the drag increase due to ice accretion and, in general, show good agreement.

Shin, Jaiwon↗
NASA NTRS1991

Prediction of ice shapes and their effect on airfoil performance

Calculations of ice shapes and the resulting drag increases are presented for experimental data on an NACA 0012 airfoil. They were made with a combination of LEWICE and interactive boundary-layer codes for a wide range of conditions which include airspeed and temperature, the droplet size and liquid water content of the cloud, and the angle of attack of the airfoil. In all cases the calculated results account for the drag increase due to ice accretion and, in general, show good agreement with data.

Shin, Jaiwon↗
NASA NTRS1990

Fortified LEWICE with viscous effects

A method for computing the prediction of ice shapes on airfoils and their effects on the airfoil lift and drag coefficients are described. The previously developed LEWICE code has been modified to avoid problems due to multiple stagnation points. The interactive boundary-layer method developed by Cebeci has been incorporated into LEWICE to improve the accuracy of predicting ice shapes as well as to compute the performance characteristics of iced airfoils. The paper also presents ice shapes calculated without and with viscous effects, the consequences for aerodynamic properties, particulary lift and drag, and evaluation of the time steps used in the ice accretion process.

Cebeci, Tuncer↗
NASA NTRS1990

Unsteady heat transfer on turbine blades

This paper describes a method for calculating heat transfer on turbine blades subjected to passing wakes. It is based on the numerical solution of the boundary-layer equations for laminar, transitional, and turbulent flows with a novel procedure to account for the movement of the stagnation point. Results are presented for a model flow and show that the procedure is numerically sound and produces results that can give good agreement with measurements provided that the turbulence model is adequate.

Cebeci, Tuncer↗
NASA NTRS1989

Interactive boundary-layer calculations of a transonic wing flow

Results obtained from iterative solutions of inviscid and boundary-layer equations are presented and compared with experimental values. The calculated results were obtained with an Euler code and a transonic potential code in order to furnish solutions for the inviscid flow; they were interacted with solutions of two-dimensional boundary-layer equations having a strip-theory approximation. Euler code results are found to be in better agreement with the experimental data than with the full potential code, especially in the presence of shock waves, (with the sole exception of the near-tip region).

Kaups, Kalle↗
NASA NTRS1989

A general method for unsteady heat transfer on turbine blades

The development of a general method for calculating unsteady heat transfer on turbine blades is described. It is based on the numerical solution of the boundary-layer equations for laminar, transitional, and turbulent flows. A novel procedure has been developed to account for the movement of the stagnation point caused by blade-passing wakes and has been applied to the stagnation region of three model flows with results which confirm its validity for laminar flows. It has also been applied to an experimental arrangement in which the average Nusselt number has been reported for turbulent flows and the results show considerable promise.

Cebeci, Tuncer↗
NASA NTRS1989

An interactive boundary-layer procedure for oscillating airfoils including transition effects

An interactive boundary-layer method previously developed and tested for steady flows is used here in a quasi-steady manner to examine the evolution of the flow behavior around oscillating airfoils operating inlight stall conditions. The calculations encompass the airfoil and wake flows at angles of attack which lead to flow separation. The location of the onset of transition is represented by a correlation based on steady flows. The results show the large effects of the viscous layer on the variation of lift coefficient with angle of attack and reduced frequency.

Cebeci, Tuncer↗
NASA NTRS1988

The calculation of flow over iced airfoils

Progress toward the development of a method for predicting the flowfield of an iced airfoil is described and shown to offer the prospect of a priori calculations of the effects of ice accretion and roughness on airfoil performance. The approach is based on interaction of inviscid flow solutions obtained by a panel method and improved upon by a finite-difference boundary-layer method which, operating in an inverse mode, incorporates viscous effects including those associated with separated flows. Results are presented for smooth, rough and iced airfoils as a function of angle of attack. Those for smooth and rough airfoils confirm the accuracy of the method and its applicability to surfaces with roughness similar to that associated with insect deposition and some forms of ice. Two procedures have been developed to deal with large ice accretion and their performance is examined and shown to be appropriate to the engineering requirements.

Cebeci, Tuncer↗