Engineering topics

Celik, C.

Publications and source records attributed to Celik, C..

6 records

DOE OSTI2024

Nuclear Data–Induced Uncertainties in Criticality Safety Analyses for High-Burnup and Extended Enrichment Fuels

Criticality safety analyses are conducted to show compliance with regulatory standards and to demonstrate safe operational conditions during the storage and transportation of spent nuclear fuel. Given the increased interest in the industry in low-enriched uranium plus (LEU+) and higher-burnup fuel, it is important to study the impact of such fuels’ use on criticality safety analyses and the resulting nuclear data–induced uncertainties. Here, in this work, nominal pressurized water reactor assemblies with LEU+ fuel enrichments up to 8 wt% 235 U and high burnups up to 80 GWd/tonne U were studied. The assemblies were placed in a generic burnup credit cask GBC-32. As a result of the different covariance libraries, using the ENDF/B-VII.1 nuclear data library consistently resulted in lower nuclear data uncertainties than did the use of the ENDF/B-VIII.0 data library. The highest contribution in the nuclear data–induced uncertainties resulted from the major actinides, and their contribution increased with increasing burnup and enrichment.

11 NUCLEAR FUEL CYCLE AND FUEL MATERIALS↗

DOE OSTI2018

Update of the nuclear criticality slide rule calculations: studies with common shielding materials - 25467

This paper presents preliminary results from the third phase of the current update to the nuclear criticality slide rule, in which MCNP, MAVRIC/Monaco, and COG have simulated the prompt neutron and photon dose from critical spheres of 4.95% enriched uranyl fluoride solution and 93.2% enriched uranium metal. New to this phase is the inclusion of various thicknesses of lead, steel, concrete, and water shielding. This phase also evaluated the effects of humidity on the unshielded configurations in the first phase, as well as the effects of changing the ground composition used in the first phase from concrete to dry soil. The small sample of results presented show that MCNP, MAVRIC/Monaco, and COG results are statistically the same or different by only a few percent. The impact of the shielding materials depends on their thickness, but doses decreased by nearly a factor of 100 are presented. In a few instances, buildup of gamma doses occurs due to neutron interactions in shielding materials. (authors)

61 RADIATION PROTECTION AND DOSIMETRY↗

DOE OSTI2017

Introduction of plutonium systems to the nuclear criticality slide rule

AWE (UK), IRSN (France), LLNL (USA) and ORNL (USA) began a long term collaboration effort in 2015 to update the nuclear criticality Slide Rule for the emergency response to a nuclear criticality accident. This document, published almost 20 years ago, gives order of magnitude estimates of key parameters, such as number of fissions and doses (neutron/gamma), useful for emergency response teams and public authorities. This paper presents, firstly, the motivation and the long term objectives for this update, then it introduces the initial critical configuration, and finally it presents the preliminary results obtained with modern 3D radiation transport codes and nuclear data for new configurations including plutonium systems. (authors)

11 NUCLEAR FUEL CYCLE AND FUEL MATERIALS↗

DOE OSTI2015

Evaluation of the concrete shield compositions from the 2010 criticality accident alarm system Benchmark experiments at the CEA VALDUC silene facility - 14454

In October 2010, a series of benchmark experiments were conducted at the French Commissariat a l'energie Atomique et aux energies Alternatives (CEA) Valduc SILENE facility. These experiments were a joint effort between the United States Department of Energy Nuclear Criticality Safety Program and the CEA. The purpose of these experiments was to create three benchmarks for the verification and validation of radiation transport codes and evaluated nuclear data used in the analysis of criticality accident alarm systems. This series of experiments consisted of three single-pulsed experiments with the SILENE reactor. For the first experiment, the reactor was bare (unshielded), whereas in the second and third experiments, it was shielded by lead and polyethylene, respectively. The polyethylene shield of the third experiment had a cadmium liner on its internal and external surfaces, which vertically was located near the fuel region of SILENE. During each experiment, several neutron activation foils and thermoluminescent dosimeters (TLDs) were placed around the reactor. Nearly half of the foils and TLDs had additional high-density magnetite concrete, high-density barite concrete, standard concrete, and/or BoroBond shields. CEA Saclay provided all the concrete, and the US Y-12 National Security Complex provided the BoroBond. Measurement data from the experiments were published at the 2011 International Conference on Nuclear Criticality (ICNC 2011) and the 2013 Nuclear Criticality Safety Division (NCSD 2013) topical meeting. Preliminary computational results for the first experiment were presented in the ICNC 2011 paper, which showed poor agreement between the computational results and the measured values of the foils shielded by concrete. Recently the hydrogen content, boron content, and density of these concrete shields were further investigated within the constraints of the previously available data. New computational results for the first experiment are now available that show much better agreement with the measured values. (authors)

42 ENGINEERING↗

DOE OSTI2015

AMPX: A Modern cross section processing system for generating nuclear data libraries - 14619

Nuclear data libraries are essential for nuclear analysis code systems like SCALE. AMPX has been continuously developed since the early 1970's and is used to generate these data libraries for SCALE. Recently, Oak Ridge National Laboratory (ORNL) initiated a major modernization effort to position AMPX for continued development and deployment on modern computing platforms. An important step toward modernization has been to merge AMPX under the SCALE continuous integration (CI) development framework. As a result, AMPX is now developed under the SCALE software quality assurance plan, providing increased confidence in the quality of data libraries developed and deployed by AMPX. This merge allowed us to develop novel methods to generate self-shielding factors that combine SCALE's resonance self-shielding capabilities with the AMPX library-generation capabilities. AMPX processes Evaluated Nuclear Data Format (ENDF/B) files. The ENDF community is working to develop a more modern format that will replace the existing ENDF/B format. Due to strict space and memory requirements when AMPX was first developed, the original AMPX processing and reading of ENDF data were tightly integrated. On newer computer systems, this is no longer necessary. Now there is a separation between reading and processing which allows for simultaneous support of current and new ENDF formats. As a result, AMPX is positioned to adopt any new ENDF format when available. For end users, the modernization effort has resulted in improved processing capabilities for generating nuclear data libraries. The objective of the paper is to document the latest AMPX cross-section processing capabilities and provide the current status of the AMPX modernization effort. (authors)

42 ENGINEERING↗

DOE OSTI2015

Criticality safety enhancements for SCALE 6.2 and beyond - 14648

SCALE is a widely used suite of tools for nuclear systems modeling and simulation that provides comprehensive, verified and validated, user-friendly capabilities for criticality safety, reactor physics, radiation shielding, and sensitivity and uncertainty analysis. Since 1980, regulators, industry, and research institutions around the world have relied on SCALE for nuclear safety analysis and design. SCALE 6.2 provides several new capabilities and significant improvements in many existing features for criticality safety analysis. Enhancements are realized for nuclear data; multigroup resonance self-shielding; continuous-energy Monte Carlo analysis for sensitivity/uncertainty analysis, radiation shielding, and depletion; and graphical user interfaces. An overview of these capabilities is provided in this paper, and additional details are provided in several companion papers. (authors)

42 ENGINEERING↗