Engineering topics
Celina, Mathias C.
Publications and source records attributed to Celina, Mathias C..
Real-time process monitoring for direct ink write additive manufacturing
Direct ink write (DIW) printing of reactive resins presents a unique challenge due to the time-dependent nature of the rheological and chemical properties of the ink. As a result, careful print optimization or process control is important to obtain consistent, high quality prints. The present invention uses a flow-through characterization cell for in situ chemical monitoring of a resin ink during DIW printing. Additionally, in-line extrusion force monitoring can be combined with off-line post inspection using machine vision. By combining in-line spectroscopy and force monitoring, it is possible to follow reaction kinetics (for example, curing of a reactive resin) and viscosity changes during printing, which can be used for a closed-loop process control. Additionally, the capability of machine vision to automatically identify and quantify print artifacts can be incorporated on the printing line to enable real-time, AI-assisted quality control of the printed products. Together, these techniques can form the building blocks of an optimized process control strategy when complex reactive ink must be used to produce printed hardware.
Cross-linkable nanocomposite anticorrosion coating
Nanocomposite anticorrosion coating can be achieved by depositing alternating, multilayers of a cross-linkable polymer and dispersed and aligned inorganic platelets followed by cross-linking of the cross-linkable polymer. The cross-linkable polymer can be an externally cross-linkable polymer that is cross-linked by diffusing a cross-linking agent into the deposited multilayer coating. Alternately, the cross-linkable polymer can be a functionalized cross-linkable polymer that is cross-linked by self-curing, thermal heat curing, or light (e.g., UV) following deposition of the multilayer coating.
Method of controlled conversion of thermosetting resins and additive manufacturing thereof by selective laser sintering
The invention is directed to a method of controlled conversion of thermosetting resins and additive manufacturing thereof by selective laser sintering. Partial curing of a thermosetting formulation can be used to increase the T g of the resin and minimize the additional cure needed to cross-link a printed object. After printing, the partially cured material is finally cured via a slow temperature ramp maintained just below the material's evolving T g .
Self-assembly assisted additive manufacturing of thermosets
The present invention relates to formulations including a self-assembly monomer. In particular embodiments, the self-assembly monomer provides a thermoset having beneficial viscoelastic properties for printing methodologies. Methods of making and using such formulations are also provided.
Multiphysics Modeling of Coupled Chemical-Thermal-Mechanical Phenomena in Chemically Blown Polyurethane Foams during Manufacturing & Aging.
Abstract not provided.
Multiphysics Modeling Of Long-Term Aging And Deformation Mechanisms In Polyurethane Foams.
Abstract not provided.
Issues with Approaches for Simulating Aging of Nuclear Power Plant Cable Materials Described in IEC and IAEA Documents.
Abstract not provided.
Issues with Approaches for Simulating Aging of Nuclear Power Plant Cable Materials Described in IEC and IAEA Documents.
Abstract not provided.
Increasing the Lifetime of Epoxy Components with Antioxidant Stabilizers
Epoxy thermoset resins are ubiquitous materials with extensive applications where they are used as encapsulants, composites, and adhesives/staking compounds used to secure sensitive components. Epoxy resins are inherently sensitive to thermo-oxidative aging, especially at elevated temperatures, which changes the bulk properties of the material and can lead to component failure for example by cracking due to embrittlement or by adhesion failure between the epoxy and filler material in a composite. This project investigated the effects of three commercial antioxidants (Irganox ® 1010 (I-102), butylated hydroxytoluene (BHT), or Chisorb ® 770 (HALS)) at two different loadings (2.5 and 5 wt%) on the mechanical and chemical aging of a model epoxy system (EPON TM 828 / Jeffamine ® T-403) under ambient conditions, 65, 95, and 110 °C. Additionally, synthetic routes towards an antioxidant capable of being covalently bound to the resin so as to prevent leaching were explored with one such molecule being successfully synthesized and purified. One commercial antioxidant (Irganox ® 1010) was found to reduce the degree of thermo-oxidatively induced damage in the system.
COVID-19 LDRD Project Summaries
Sandia National Laboratories currently has 27 COVID-related Laboratory Directed Research & Development (LDRD) projects focused on helping the nation during the pandemic. These LDRD projects cross many disciplines including bioscience, computing & information sciences, engineering science, materials science, nanodevices & microsystems, and radiation effects & high energy density science.
Controlled Conversion Approaches to Selective Laser Sintering (SLS) Printing of High Tg Thermosets.
Abstract not provided.
From Simple Epoxy Adhesives to a Foundation in Materials Aging.
Abstract not provided.
From Simple Epoxy Adhesives to a Foundation in Materials Aging.
Abstract not provided.
H2O and O2 sorption and diffusion behavior in thermoset polymers with temperature.
Abstract not provided.
Self Assembly-Assisted Additive Manufacturing: Direct Ink Write 3D Printing of Epoxy-Amine Thermosets
The use of self–assembling, pre–polymer materials in 3D printing is rare, due to difficulties of facilitating printing with low molecular weight species and preserving their reactivity and/or functions on the macroscale. Akin to 3D printing of small molecules, examples of extrusion–based printing of pre–polymer thermosets are uncommon, arising from their limited rheological tuneability and slow reactions kinetics. The direct ink write (DIW) 3D printing of a two–part resin, Epon 828 and Jeffamine D230, using a self–assembly approach is reported. Through the addition of self–assembling, ureidopyrimidinone–modified Jeffamine D230 and nanoclay filler, suitable viscoelastic properties are obtained, enabling 3D printing of the epoxy–amine pre–polymer resin. A significant increase in viscosity is observed, with an infinite shear rate viscosity of approximately two orders of magnitude higher than control resins, in addition to, an increase in yield strength and thixotropic behavior. As a result, printing of simple geometries is demonstrated with parts showing excellent interlayer adhesion, unachievable using control resins.