Search NASA⌕ Search

Engineering topics

Cetin Kiris

Publications and source records attributed to Cetin Kiris.

At least 19 records
All sourcesNASA NTRSDOE OSTI
NASA NTRS2023

Numerical Study on the Aerodynamics of an Iced Airfoil With Scale-Resolving Simulations

Scale-resolving simulations of the NACA 23012 airfoil with horn ice accretion on the leading edge are conducted using the hybrid Reynolds-averaged Navier–Stokes/large-eddy simulation (hybrid RANS/LES) and wall-modeled large-eddy simulation (WMLES) approaches implemented in the Launch, Ascent, and Vehicle Aerodynamics (LAVA) framework. Aerodynamic results at the Reynolds number of 1.8 million show good comparison with the experimental measurements at different angles of attack from pre-stall to post-stall regimes. The pressure plateaus caused by the flow separation and the recovery of pressure inside the separation bubble around the iced leading edge are well predicted with the scale-resolving simulations when sufficient grid resolution is used around the accreted ice. The unsteadiness of the turbulent flows around the iced airfoil is also examined through the turbulent kinetic energy with the Reynolds normal stress anisotropy. Kelvin–Helmholtz instability (KHI) arises at the shear layer triggered by the upper ice horn and leads to rapid laminar-to-turbulent transition over a large range of angle of attack. With the increase of the angle of attack, the region with high turbulence intensity induced by the unstable shear layer spreads quickly over the entire upper surface of the airfoil. The coherent KHI modes from the upper and lower ice horns are extracted using the spectral proper orthogonal decomposition (SPOD) technique. The SPOD modes extracted from the upper shear layer have large-scale variations in the spanwise direction and low-rank behavior where the energy of the leading SPOD mode at each Strouhal number of the KHI largely represents the total energy when the mode number in the spanwise direction is small.

ARMD↗
NASA NTRSDate not supplied

Transonic Lift and Drag Predictions using Wall Modelled Large Eddy Simulations

Wall-modelled Large Eddy Simulations (WMLES) of the NASA Common Research Model (CRM) at transonic conditions and various angles of attacks leading up to and including shock-induced flow separation are performed using the LAVA computational framework. The simulations are shown to accurately predict the lift curve slope and the onset of separation characterized by the break in the pitching moment. Furthermore, careful assessment of skin-friction drag at cruise condition and its subsequent decrease with increasing angles of attack are shown to be in agreement with viscous sublayer resolving Reynolds Averaged Navier Stokes(RANS) simulations. The small differences between WMLES and RANS appear to be of the same order as differences seen between two RANS models at the cruise-point. Some sensitivity is observed to the coefficient used in the subgrid scale model, although this can be reconciled by noting the low chord- and shock-incidence Reynolds numbers (Rex≈106) seen in the outboard regions of the wing, along with the uncertainties associated with tripping and the numerical transition that occurs near the leading edge. Among the primary drawbacks seen in the WMLES predictions is the subdued increase in wave-drag with increasing angle-of-attack and the shock intensity when compared with experimental data. Preliminary assessment suggests that additional span- and stream-wise grid resolution is likely needed in mid- and out-board portions of the wing to better resolve the shock-induced separated flow and to further investigate prediction accuracy of unsteady temporal characteristics of the problem.

ARMD↗
NASA NTRSDate not supplied

Scale-Resolving Simulations of a Supersonic Retro-Propulsion Concept For Mars Entry, Descent, and Landing

Supersonic retro-propulsion (SRP) is a deceleration technology that could enable largerpayloads and potentially humans to be brought from space to the surface of Mars safely.Accurate and reliable CFD predictions are needed to help design future Mars entry, descent,and landing (EDL) vehicles due to the cost and limitations of wind tunnel tests. TypicalCFD approaches struggle at points along the Mars EDL trajectory with high enough altitude(low enough ambient pressure) that the SRP motor plumes are over-expanded. This workdemonstrates how high-order scale-resolving simulations on Cartesian AMR grids can provideaccurate and reliable time-averaged aerodynamic loads on the vehicle for this challengingflow regime. Greater than second order convergence in the time-averaged integrated axialforce𝐶𝐴is obtained across the three finest mesh resolutions simulated, and the estimateduncertainty is smaller than the unsteady standard deviation – demonstrating the accuracy andreliability of the method. Although costly, this approach can yield higher confidence in𝐶𝐴thanpreviously obtained in a reasonable turnaround time and is within reach for a few points in thetrajectory (i.e. Mach 2.4, 2.52, and 2.78). Further computational performance and numericalmethods improvements are needed to reduce the cost enough to bring this method into the EDLengineering design cycle.

S&M↗