Engineering topics

Chaderjian, N. M.

Publications and source records attributed to Chaderjian, N. M..

6 records

NASA NTRS1992

Algorithm development with applications to aerodynamics and aeroelasticity

The development of a streamwise upwind algorithm is presented. Applications of this algorithm to steady flow over a delta wing and unsteady flow over an oscillating wing, respectively, are covered. An extension to higher order accuracy for upwind methods is discussed. This scheme will use the compatibility relations for the extension. The use of multiple zones in the calculation of unsteady flows is considered. Multiple zones are one way to treat complex configurations, such as complete aircraft. Aeroelastic calculations are discussed. A procedure for aeroelastic calculations is described that simultaneously solves the aerodynamic and structural equations of motion. Sample calculations are given to illustrate the above.

Goorjian, P. M.↗

NASA NTRS1986

Transonic Navier-Stokes wing solutions using a zonal approach. Part 2: High angle-of-attack simulation

A computer code is under development whereby the thin-layer Reynolds-averaged Navier-Stokes equations are to be applied to realistic fighter-aircraft configurations. This transonic Navier-Stokes code (TNS) utilizes a zonal approach in order to treat complex geometries and satisfy in-core computer memory constraints. The zonal approach has been applied to isolated wing geometries in order to facilitate code development. Part 1 of this paper addresses the TNS finite-difference algorithm, zonal methodology, and code validation with experimental data. Part 2 of this paper addresses some numerical issues such as code robustness, efficiency, and accuracy at high angles of attack. Special free-stream-preserving metrics proved an effective way to treat H-mesh singularities over a large range of severe flow conditions, including strong leading-edge flow gradients, massive shock-induced separation, and stall. Furthermore, lift and drag coefficients have been computed for a wing up through CLmax. Numerical oil flow patterns and particle trajectories are presented both for subcritical and transonic flow. These flow simulations are rich with complex separated flow physics and demonstrate the efficiency and robustness of the zonal approach.

Chaderjian, N. M.↗

NASA NTRS1985

Computational aspects of zonal algorithms for solving the compressible Navier-Stokes equations in three dimensions

Transonic flow fields about wing geometries are computed using an Euler/Navier-Stokes approach in which the flow field is divided into several zones. The flow field immediately adjacent to the wing surface is resolved with fine grid zones and solved using a Navier-Stokes algorithm. Flow field regions removed from the wing are resolved with less finely clustered grid zones and are solved with an Euler algorithm. Computational issues associated with this zonal approach, including data base management aspects, are discussed. Solutions are obtained that are in good agreement with experiment, including cases with significant wind tunnel wall effects. Additional cases with significant shock induced separation on the upper wing surface are also presented.

Holst, T. L.↗

NASA NTRS1985

Numerical solution of transonic wing flows using an Euler/Navier-Stokes zonal approach

Transonic flow fields about wing geometries are computed using an Euler/Navier-Stokes approach in which the flow field is divided into several zones. The grid zones immediately adjacent to the wing surface are suitably clustered and solved with the Navier-Stokes equations. Grid zones removed from the wing are less finely clustered and are solved with the Euler equations. Wind tunnel wall effects are easily and accurately modeled with the new grid-zoning algorithm because the wind tunnel grid is constructed as an exact subset of the corresponding free-air grid. Solutions are obtained that are in good agreement with experiment, including cases with significant wind tunnel wall effects and shock-induced separation on the upper wing surface.

Holst, T. L.↗

NASA NTRS1985

The numerical simulation of steady transonic rotational flow using a dual potential formulation

A finite-difference method is presented that simulates steady transonic rotational flow of an inviscid fluid by representing the velocity field as the sum of scalar and vector potentials. This dual potential velocity decomposition extends the validity of the scalar (full) velocity potential to include vorticity. The inclusion of a vector potential also permits an alternate treatment of lift that does not require a circulation wake cut. This is accomplished by specifying the vector potential as a constant on the airfoil surface in order to satisfy a Kutta condition. The governing equations are solved as iteratively decoupled scalar equations using approximate factorization techniques, and the overall efficiency approaches that of the full potential equation. The governing equations are able to convect entropy and vorticity throughout the flow field and are equivalent to the Euler equations in continuous flow domains, however at shocks the Rankine-Hugoniot entropy jump must be supplied. An entropy correction method is presented and verified with transonic airfoil solutions of the Euler equations.

Chaderjian, N. M.↗

NASA NTRS1983

A zonal approach for the steady transonic simulation of inviscid rotational flow

A finite difference zonal method is developed to compute steady inviscid transonic flow by coupling a semi-flux split form of the Euler equations in a vorticity producing zone with a zone of scalar and vector (i.e., dual) potential equations. The dual potential equations permit vorticity convection, but not production, and are efficiently solved as an iteratively decoupled set of scalar equations. Zonal results presented for a nonlifting biconvex airfoil on a stretched Cartesian grid show substantial savings in CPU time compared to solving the semi-flux split Euler equations alone. The dual potential equations also provide an alternate way of treating potential flows with circulation. This has been demonstrated by computing a subcritical flow over a lifting airfoil using generalized curvilinear coordinates.

Chaderjian, N. M.↗