Engineering topics

Chae, Sujong

Publications and source records attributed to Chae, Sujong.

11 records

DOE OSTI2024

Lithium-ion hopping weakens thermal stability of LiPF 6 carbonate electrolytes

Lithium hexafluorophosphate (LiPF 6 )-based carbonate electrolytes are widely used in commercial lithium-ion batteries (LIBs), but their thermal instability limits the cycle life and safety of LIBs at elevated temperatures. Few studies have yielded insight into the initial PF 6 — decomposition reaction that promotes thermal instability of LiPF6-based electrolytes. Here, we find that lithium-ion hopping assisted by the overall reorientational motion of propylene carbonate molecules facilitates PF 6 — decomposition at elevated temperatures in 1 M LiPF 6 /propylene carbonate electrolyte. Further, we demonstrate that urea additives, by preventing lithium-ion hopping, suppress the initial LiPF 6 decomposition reaction and enhance the thermal stability of the electrolyte. LIB cell tests with LiNi 0.6 Mn 0.2 Co 0.2 O 2 ||Li 4 Ti 5 O 12 show improved LIB performance at elevated temperatures with the thermally stabilized electrolyte. This study provides key insights into the design of thermally stable LiPF 6 -based carbonate electrolytes for improving the cycle life, calendar life, and safety of LIBs in elevated-temperature applications.

25 ENERGY STORAGE↗

DOE OSTI2023

Electrolytes for lithium batteries with carbon and/or silicon anodes

Electrolytes for lithium ion batteries with carbon-based, silicon-based, or carbon- and silicon-based anodes include a lithium salt; a nonaqueous solvent comprising at least one of the following components: (i) an ester, (ii) a sulfur-containing solvent, (iii) a phosphorus-containing solvent, (iv) an ether, (v) a nitrile, or any combination thereof, wherein the lithium salt is soluble in the solvent; a diluent comprising a fluoroalkyl ether, a fluorinated orthoformate, a fluorinated carbonate, a fluorinated borate, or a combination thereof, wherein the lithium salt has a solubility in the diluent at least 10 times less than a solubility of the lithium salt in the solvent; and an additive having a different composition than the lithium salt, a different composition than the solvent, and a different composition than the diluent.

Xu, Wu↗

DOE OSTI2022

Locking oxygen in lattice: A quantifiable comparison of gas generation in polycrystalline and single crystal Ni-rich cathodes

High-energy Ni-rich NMC (LiNi x Mn y Co 1-x-y O 2 , x ≥ 0.6) is a very promising cathode material in Li-ion batteries but the gas generation during cycling is a significant safety concern and becomes the major roadblock of the large-scale commercialization of Ni-rich NMC cathode materials. Micron-sized single crystal Ni-rich NMC has a potential to address the common issues that polycrystals have. However, it is unknown if gassing issue will be mitigated or even eliminated by using single crystals, not mentioning a quantifiable understanding of gas generation from single crystals and polycrystals. This work takes LiNi 0.76 Mn 0.14 Co 0.1 O 2 (NMC76) as a model material to study the mechanism of gas generation from single crystal and polycrystalline NMC by using both coin cells and pouch cells, which provides different conclusions on the generated gases, highlighting the importance of using relevant testing conditions for fundamental diagnostic study on battery materials. Further, the information from single crystal NMC also provides critical insights from material perspective to enhance the safety attributes of Ni-rich NMC cathodes.

25 ENERGY STORAGE↗

DOE OSTI2022

Crosslinked Polyethyleneimine Gel Polymer Interface to Improve Cycling Stability of RFBs

Redox flow batteries are considered a promising technology for grid energy storage. However, capacity decay caused by crossover of active materials is a universal challenge for many flow battery systems, which are based on various chemistries. In this paper, using the vanadium redox flow battery as an example, we demonstrate a new gel polymer interface (GPI) consisting of crosslinked polyethyleneimine with a large amount of amino and carboxylic acid groups introduced between the positive electrode and the membrane. The GPI functions as a key component to prevent vanadium ions from crossing the membrane, thus supporting stable long-term cycling. Cyclic voltammetry (CV) and electrochemical impedance spectroscopy (EIS) measurements were conducted to investigate the effect of GPI on the electrochemical properties of graphitic carbon electrodes (GCFs) and redox reaction of catholyte. X-ray photoelectron spectroscopy (XPS) and 1 H nuclear magnetic resonance (NMR) spectra demonstrated that the crosslinked GPI is chemically stable for 100 cycles without dissolution of polymers and swelling in the strong acidic electrolytes. Results from inductively coupled plasma mass spectrometry (ICP-MS), Fourier-transform infrared (FTIR) spectroscopy, and energy-dispersive X-ray (EDX) spectroscopy proved that the GPI is effective in maintaining the concentration of vanadium species in their respective half-cells, resulting in improved cycling stability because of it prevents active species from crossing the membrane and stabilizes the oxidation states of active species.

Lim, Hyung-Seok↗

DOE OSTI2021

Stable Solid Electrolyte Interphase Layer Formed by Electrochemical Pretreatment of Gel Polymer Coating on Li Metal Anode for Lithium–Oxygen Batteries

Lithium (Li)-oxygen (O2) batteries (LOBs) exhibit the highest theoretical specific energy density among candidates of the next-generation energy storage systems, but the instability of Li metal anode (LMA), air electrode, and electrolyte largely limit the practical energy density of these batteries. Herein, we report an effective method to protect LMA against side reactions between LMA and crossover contaminants such as highly reactive oxygen moieties. A solid electrolyte interphase (SEI) layer rich in inorganic components was formed on a LMA coated with polyethylene oxide thin-film through an in-situ electrochemical pre-charging step under oxygen atmosphere. This uniformly distributed stiff SEI layer interacted with flexible polymer matrix and formed a submicron-sized gel-like polymer layer. This polymer supported SEI layer leads to much longer cycle life (130 vs. 65 cycles) as compared to those of pristine cell under the same testing conditions (1.0 mAh cm-2 at 0.2 mA cm-2 in the voltage range of 2 to 5 V without any catalysts). It is also very effective during low voltage (2 to 4.5 V) cycling with a redox mediator (0.1 and 0.15M (2,2,6,6-tetramethylpiperidin-1-yl) oxidanyl). Therefore, this approach can be used to stabilize LMA/electrolytes interphase and improve the cycle life of rechargeable LOBs.

lithium-oxygen batteries, lithium metal anodes, ar↗

DOE OSTI2021

A Micrometer‐Sized Silicon/Carbon Composite Anode Synthesized by Impregnation of Petroleum Pitch in Nanoporous Silicon

Porous silicon (Si)/carbon nanocomposites have been extensively explored as a promising anode material for high-energy lithium (Li)-ion batteries (LIBs). However, shrinking of the pores and sintering of Si in the nanoporous structure during fabrication often diminishes the full benefits of nanoporous Si. Herein, a scalable method is reported to preserve the porous Si nanostructure by impregnating petroleum pitch inside of porous Si before high-temperature treatment. The resulting micrometer-sized Si/C composite maintains a desired porosity to accommodate large volume change and high conductivity to facilitate charge transfer. It also forms a stable surface coating that limits the penetration of electrolyte into nanoporous Si and minimizes the side reaction between electrolyte and Si during cycling and storage. A Si-based anode with 80% of pitch-derived carbon/nanoporous Si enables very stable cycling of a Si||Li(Ni0.5Co0.2Mn0.3)O 2 (NMC532) battery (80% capacity retention after 450 cycles). It also leads to low swelling in both particle and electrode levels required for the next generation of high-energy LIBs. In conclusion, the process also can be used to preserve the porous structure of other nanoporous materials that need to be treated at high temperatures.

anode materials↗

DOE OSTI2021

Achieving Highly Reproducible Results in Graphite-based Li-ion Full Coin Cells

Electrode materials, cathodes or anodes, are mostly evaluated in half coin cells where lithium (Li) metal is used. However, due to the instability nature of Li metal, the cycling performances of the half cells is more likely reflecting Li anode stability instead of the coupled electrodes, questioning the conclusions. Full coin cells utilizing graphite as the anode effectively assesses materials. But the key factors of preparing full coin cells with reproducible performances have rarely been discussed and overlooked leading to many inconsistent results. This work discusses the scientific gap between cell preparation and observed electrochemical performances to unveil the key parameters for achieving consistent and reliable results in full coin cells, critical for effective evaluation of any new materials tested under relevant conditions. The knowledge from this work is broadly applicable in other full cells systems such as Si-based full cells or Na-ion batteries.

Hu, Jiangtao↗

DOE OSTI2021

Mesoscale-architecture-based crack evolution dictating cycling stability of advanced lithium ion batteries

The cracking phenomenon of Ni-rich NMC (LiNixMnyCo1-x-yO2, x = 0.6) secondary particles is frequently discovered and believed to be one of critical reasons deteriorating the long-term cycling stability of NMC cathode in lithium ion batteries (LIBs). However, the initiation and evolution of those cracks is still controversial due to the limited quantification especially by in situ monitoring, leading to the challenge of identifying an efficient approach to inhibit the formation of the fractures during repeated cycling. Herein, the irreversible, anisotropic cycling lattice and mesoscale expansion/shrinkage of nano-grain during the first cycle, as revealed by in situ X-ray diffraction (XRD) and in situ atomic force microscopy (AFM), have been quantified and confirmed to be the dominant driving forces of microcracks initiation at the grain boundaries. These microcracks preferentially nucleates at the core region with random oriented nano-grains in early stage. The further growth and aggregation of microcracks into macrocrack eventually results in microfracture propagation radially outward to the periphery region with more uniform nano-grain orientation. This mesoscale nano-grain architecture controlled cracking process highlight the importance of predictive synthesis of cathode materials with controllable multiscale crystalline architecture for high-performance LIBs.

25 ENERGY STORAGE↗

DOE OSTI2020

Optimized Electrolyte with High Electrochemical Stability and Oxygen Solubility for Lithium–Oxygen and Lithium–Air Batteries

Lithium-oxygen (Li-O2) batteries with high reversibility require a stable electrolyte against the side reactions with Li metal anode and reactive oxygen species. Moreover, an electrolyte which can effectively utilize the low partial pressure of oxygen in atmosphere has significance effect on the practical application lithium-air batteries. In this study, we developed a localized high concentration electrolyte (LHCE) using 1H,1H,5H-Octafluoropentyl 1,1,2,2-tetrafluoroethyl ether (OTE) as a diluent, which satisfies all these conditions at the same time. The OTE-based LHCE exhibits much improved electrochemical performances in Li-O2 batteries and Li-air batteries compared to the conventional electrolyte and high concentration electrolyte. The design principle of this novel electrolyte also provides an important guideline and reference for future researches of electrolytes in Li-O2 and Li-air batteries.

lithium air batteries, Localized high concentratio↗

DOE OSTI2020

Effects of Fluorinated Diluents in Localized High‐Concentration Electrolytes for Lithium–Oxygen Batteries

Abstract A stable electrolyte is critical for practical application of lithium–oxygen batteries (LOBs). Although the ionic conductivity and electrochemical stability of the electrolytes have been extensively investigated before, their oxygen solubility, viscosity, volatility, and the stability against singlet oxygen ( 1 O 2 ) still need to be comprehensively investigated to provide a full picture of the electrolytes, especially for an open system such as LOBs. Herein, a systematic investigation is reported on the localized high‐concentration electrolytes (LHCEs) using different fluorinated diluents in comparison with those of conventional electrolytes. The physical properties and activation energies for reactions with singlet oxygen ( 1 O 2 ) of these electrolytes are calculated by density functional theory. The electrochemical performances of LOBs using these electrolytes are compared. This study reveals that the correlation between the stability of the electrolytes and their physical and electrochemical properties depends strongly on the diluents in LHCEs. Therefore, it shines light on the rational design of new electrolytes for LOBs.

Kwak, Won‐Jin↗

DOE OSTI2020

Evolution of the Rate-Limiting step: From Thin Film to Thick Ni-rich Cathodes

Ni-rich NMC (LiNixMnyCo1-x-yO2, x = 0.6) has the attributes of high specific capacity (greater than 180 mAh g-1), high operating voltage (ca. 3.8 V) and low cost, which is therefore deemed as one of the most promising cathode candidates for next-generation high-energy Li-ion batteries (LIBs). However, challenges exist before the large-scale commercialization of Ni-rich cathode such as gas generation, capacity degradation especially at high rate or elevated temperatures. From thin film to densely pack high loading cathode, this work investigates the rate-limiting steps in Ni-rich cathodes e.g., phase structure, electronic and ionic conductivity to understand the reaction kinetics at different scales. This work provides new insights in understanding the electrochemical properties of Ni-rich cathode at different levels to inspire revolutionary ideas to address the fundamental issues of Ni-rich cathode from materials to relevant electrode levels.

Hu, Jiangtao↗