Search NASA⌕ Search

Engineering topics

Chahal, Rajni

Publications and source records attributed to Chahal, Rajni.

X-ray and molecular dynamics study of the temperature-dependent structure of molten NaF-Zr⁢F 4

The local atomic structure of NaF-Zr⁢F 4 (53–47 mol%) molten system and its evolution with temperature are examined with x-ray scattering measurements which are then used to validate the quality of ab initio and neural network-based molecular dynamics (NNMD) calculations in the temperature range 515–700°⁢C. The machine-learning enhanced NNMD calculations offer improved efficiency while maintaining accuracy at higher distances compared to ab initio calculations. Looking at the evolution of the pair distribution function with increasing temperature, a fundamental change in the liquid structure within the selected temperature range, accompanied by a slight decrease in overall correlation is revealed. NNMD calculations indicate the coexistence of three different fluorozirconate complexes: [Zr⁢F 6 ] 2– , [Zr⁢F 7 ] 3– , and [Zr⁢F 8 ] 4– , with a shift in the dominant coordination state from the 7-coordinated Zr cation toward a 6-coordinated cation with increasing temperature. The study also highlights the metastability of different local coordination structures, with frequent interconversions between the 6- and 7-coordinate states. Analysis of the Zr-F-Zr angular distribution function reveals the presence of both “edge-sharing” and “corner-sharing” fluorozirconate complexes with specific bond angles and distances in accord with previous studies, while the next-nearest-neighbor cation-cation correlations demonstrate a clear preference for unlike cations as nearest-neighbor pairs, emphasizing nonrandom arrangement. Finally, these findings contribute to a comprehensive understanding of the complex local structure of the molten salt, providing insights into temperature-dependent preferences and correlations within the molten system.

36 MATERIALS SCIENCE↗

Deep-Learning Interatomic Potential Connects Molecular Structural Ordering to the Macroscale Properties of Polyacrylonitrile

Polyacrylonitrile (PAN) is an important commercial polymer, bearing atactic stereochemistry resulting from nonselective radical polymerization. As such, an accurate, fundamental understanding of governing interactions among PAN molecular units is indispensable for advancing the design principles of final products at reduced processability costs. While ab initio molecular dynamics (AIMD) simulations can provide the necessary accuracy for treating key interactions in polar polymers, such as dipole–dipole interactions and hydrogen bonding, and analyzing their influence on the molecular orientation, their implementation is limited to small molecules only. Herein, we show that the neural network interatomic potentials (NNIPs) that are trained on the small-scale AIMD data (acquired for oligomers) can be efficiently employed to examine the structures and properties at large scales (polymers). NNIP provides critical insight into intra- and interchain hydrogen-bonding and dipolar correlations and accurately predicts the amorphous bulk PAN structure validated by modeling the experimental X-ray structure factor. Furthermore, the NNIP-predicted PAN properties, such as density and elastic modulus, are in good agreement with their experimental values. Overall, the trend in the elastic modulus is found to correlate strongly with the PAN structural orientations encoded in the Hermans orientation factor. In conclusion, this study enables the ability to predict the structure–property relations for PAN and analogues with sustainable ab initio accuracy across scales.

36 MATERIALS SCIENCE↗

Chemistry Informed Machine Learning-Based Heat Capacity Prediction of Solid Mixed Oxides

Knowing heat capacity is crucial for modeling temperature changes with the absorption and release of heat and for calculating the thermal energy storage capacity of oxide mixtures with energy applications. The current prediction methods (ab initio simulations, computational thermodynamics, and the Neumann–Kopp rule) are computationally expensive, not fully generalizable, or inaccurate. Machine learning has the potential of being fast, accurate, and generalizable, but it has been scarcely used to predict mixture properties, particularly for mixed oxides. Here, we demonstrate a method for the generalizable prediction of heat capacity of solid oxide pseudobinary mixtures using heat capacity data obtained from computational thermodynamics and descriptors from ab initio databases. Further, models trained through this workflow achieved an error (mean absolute error of 0.43 J mol –1 K –1 ) lower than the uncertainty in differential scanning calorimetry measurements, and the workflow can be extended to predict other properties derived from the Gibbs free energy and for higher-order oxide mixtures.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Multiobjective Hyperparameter Optimization for Deep Learning Interatomic Potential Training Using NSGA-II

Deep neural network (DNN) potentials are an emerging tool for simulation of dynamical atomistic systems, with the promise of quantum mechanical accuracy at speedups of 10000$\times$. As with other DNN methods, hyperparameters used during training can make a substantial difference in model accuracy, and optimal settings vary with dataset. To enable rapid tuning of hyperparameters for DNN potential training, we developed a scalable multiobjective optimization evolutionary algorithm for supercomputers and tested it on the Summit system at the Oak Ridge Leadership Computing Facility (OLCF). The multiobjective approach is required due to the coupling of two learned values defining the potential: the energy and force. Using a large-scale implementation of the NSGA-II algorithm adapted for training DNN potentials, we discovered several optimal multiobjective combinations, including best choices of activation functions, learning rate scaling scheme, and pairing of the two radial cutoffs used in the three dimensional descriptor function.

Coletti, Mark↗

Short- to Intermediate-Range Structure, Transport, and Thermophysical Properties of LiF–NaF–ZrF4 Molten Salts

LiF–NaF–ZrF 4 multicomponent molten salts are identified as promising candidates for coolant salts in molten salt reactors and advanced high-temperature reactors. This study focused on low-melting point salt compositions of interest: 38LiF–51NaF–11ZrF 4 , 42LiF–29NaF–29ZrF 4 , and 26LiF–37NaF–37ZrF 4 . Ab-initio molecular dynamics (AIMD) calculations were performed and compared with available experimental data to assess the ability of rigid ion models (RIM) to reproduce short- to intermediate-range structure, transport, and thermophysical properties of the LiF–NaF–ZrF 4 salt mixtures. It is found that as ZrF 4 mol% increases, the average cation–anion coordination number (CN) of monovalent cations (Li + , Na + ) obtained from RIM calculations decreases, while multivalent Zr 4+ CN varied from 15% to 19% in comparison to corresponding AIMD values. In addition, RIM is found to predict the existence of 7, 8, and 9 coordinated fluorozirconate complexes, while AIMD and the available experimental data showed an occurrence of 6, 7, and 8 coordinated complexes in the melt. The intermediate-range structure analysis revealed that while the RIM parameters are able to reproduce a local structure for lower ZrF 4 mol% salts such as in 38LiF–51NaF–11ZrF 4 , an extensive fluorozirconate network formation is observed in RIM simulations for higher ZrF 4 mol% compositions. The network generated by RIM parameters is found to be mainly connected by “corner-sharing” fluorozirconate complexes as opposed to both “edge-sharing” and “corner-sharing” connectively portrayed by AIMD. It is found that a close agreement between AIMD and the RIM salt structure for the 11-mol% ZrF 4 salt resulted in good agreement in the calculated Zr diffusivities and the viscosity values. However, due to the inaccurate short- to intermediate-range structure prediction by RIM for higher ZrF 4 mol% compositions, thermophysical properties such as densities and heat capacity differ by up to 26% and 27%, respectively, upon comparison with AIMD and experimental values. Also, the network-dominated properties such as diffusion coefficients and viscosities differed by up to two and three orders of magnitude, respectively. This study signifies the importance of accurate salt structure generation for an accurate prediction of transport and thermophysical properties of multicomponent molten salts.

11 NUCLEAR FUEL CYCLE AND FUEL MATERIALS↗