Search NASA⌕ Search

Engineering topics

Chan, Cy

Publications and source records attributed to Chan, Cy.

Mobiliti v1.0

Mobiliti is a software platform designed to emulate the dynamics of a regional transportation road network. It is built on open-source software that provides parallel discrete-event simulation. The software is transformative in the area of transportation network simulation because of the geospatial scale and fidelity of the network model and the computational time it takes to model a full day of travel demand. For example, it runs a simulation of the entire San Francisco Bay Area, with a network model of ~1M links and a population that completes ~19M trips in ~5 minutes. This scale of simulation has not been attempted with existing simulation models due to the complexity of the model and the computational time it would take to complete. The intent of the software is to create a digital twin capability for cities to evaluate consequences of infrastructure or policy changes on road network dynamics.

Macfarlane, Jane↗

Simulating the Impact of Dynamic Rerouting on Metropolitan-scale Traffic Systems

The rapid introduction of mobile navigation aides that use real-time road network information to suggest alternate routes to drivers is making it more difficult for researchers and government transportation agencies to understand and predict the dynamics of congested transportation systems. Computer simulation is a key capability for these organizations to analyze hypothetical scenarios; however, the complexity of transportation systems makes it challenging for them to simulate very large geographical regions, such as multi-city metropolitan areas. In this article, we describe enhancements to the Mobiliti parallel traffic simulator to model dynamic rerouting behavior with the addition of vehicle controller actors and vehicle-to-controller reroute requests. The simulator is designed to support distributed-memory parallel execution using discrete event simulation and be scalable on high-performance computing platforms. We demonstrate the potential of the simulator by analyzing the impact of varying the population penetration rate of dynamic rerouting on the San Francisco Bay Area road network. Using high-performance parallel computing, we can simulate a day in the San Francisco Bay Area with 19 million vehicle trips with 50 percent dynamic rerouting penetration over a road network with 0.5 million nodes and 1 million links in less than three minutes. We present a sensitivity study on the dynamic rerouting parameters, discuss the simulator’s parallel scalability, and analyze system-level impacts of changing the dynamic rerouting penetration. Furthermore, we examine the varying effects on different functional classes and geographical regions and present a validation of the simulation results compared to real-world data.

97 MATHEMATICS AND COMPUTING↗

Performance Analysis of Speculative Parallel Adaptive Local Timestepping for Conservation Laws

Stable simulation of conservation laws, such as those used to model fluid dynamics and plasma physics applications, requires the satisfaction of the so-called Courant-Friedrichs-Lewy condition. By allowing regions of the mesh to advance with different timesteps that locally satisfy this stability constraint, significant work reduction can be attained when compared to a time integration scheme using a single timestep size. However, parallelizing this algorithm presents considerable difficulty. Since the stability condition depends on the state of the system, dependencies become dynamic and potentially non-local. In this article, we present an adaptive local timestepping algorithm using an optimistic (Timewarp-based) parallel discrete event simulation. We introduce waiting heuristics to limit misspeculation and a semi-static load balancing scheme to eliminate load imbalance as parts of the mesh require finer or coarser timesteps. Last, we outline an interface for separating the physics of the specific conservation law from the temporal integration allowing for productive adoption of our proposed algorithm. We present a misspeculation study for three conservation laws, demonstrating both the productivity of the local timestepping API, for which 74% of the lines of code are reused across different conservation laws, and the robustness of the waiting heuristics—at most 1.5% of element updates are rolled back. Our performance studies demonstrate up to a 2.8× speedup versus a baseline unoptimized local timestepping approach, a 4x improvement in per-node throughput compared to an MPI parallelization of synchronous timestepping, and scalability up to 3,072 cores on NERSC’s Cori Haswell partition.

97 MATHEMATICS AND COMPUTING↗

Computer Science Research Needs for Parallel Discrete Event Simulation (PDES)

Historically, scientific computing efforts have demonstrated the clear need for, and effective use of, supercomputing with traditional time-stepped simulations. Nevertheless, there are several areas in the mission spaces of the U.S. Department of Energy and other agencies waiting to tap advanced computing research using a different, discrete event style of modeling, simulation, and analysis. These span a wide spectrum of applications including energy grid resilience, urban planning and policy, transportation science, building technologies, emergency response and planning, environmental impact analysis, computational epidemiology, Internet communications, cyber security, and cyber-physical systems, to name only a few. Even within traditional scientific applications, the role of discrete event modes of execution is increasing in the form of new event-based mathematical solvers such as quantized state integration methods and discrete-continuous hybrid system solvers. Co-design of advanced supercomputing hardware systems is another area that exploits discrete event simulation at its core for effective analyses. Complex systems, entity behaviors and interconnections play a significant role in all these applications, which are mapped to large-scale models with discrete event formulations. To make advancements in all the aforementioned scientific areas, many technical aspects need to be more thoroughly studied and deeply understood in parallel discrete event simulation (PDES). The unique dynamics inherent in a discrete event modeling approach, by their very nature, intersect and influence the entire stack of the computing system, including (a) the unique nature of the instruction sets exercised in PDES workloads without a predominance of high-precision floating point operations, (b) virtual time-constrained multi-threaded execution of many logical processes per processor, (c) extremely variable and difficult to predict network traffic characteristics, (d) interfaces and inter-dependencies with machine learning and artificial intelligence codes at higher software layers, and (e) highly challenging load balancing needs, especially in effectively accounting for accelerated/extremely heterogeneous computing in current and future high-performance computing systems. Efficient and accurate parallel execution of PDES workloads is also dominated by challenges in dealing with their asynchronous concurrency fundamentally present at the model level. Conservative synchronization, optimistic/speculative synchronization, and their hybrid schemes open new questions in fundamental computer science with respect to reversibility of computation and prediction (lookahead) of behaviors inherent within model codes. On the implementation front, there are relatively few scalable, general-purpose parallel discrete event simulators in the world, and even fewer have been studied on emerging hardware platforms. To enable scientific advances using PDES, the research needs in computer science must also be pursued and met in the intersection of the algorithmic and hardware-aware aspects of scalable PDES engines. This report is aimed at capturing a computer science-oriented view of this important area of research in PDES, presenting a sample of important applications with their inherent discrete event technology elements. Needs are outlined in core areas of parallel discrete event research as well as cross-cutting directions in computer science research that positively impact scientific advancements across several important application areas. A selection of priority research opportunities in advanced computing for PDES is identified to serve as reference for key research topics and their order of importance for scientific advancements.

97 MATHEMATICS AND COMPUTING↗

Devastator Parallel Discrete Event Simulation Runtime (Devastator) v1.0

The Devastator runtime is a modern C++ implementation of optimistic parallel discrete event simulation methods. Devastator allows simulation application code to productively specify their component and event functionality with C++14 constructs. It utilizes GASNet-EX for distributed memory communication and includes parallel performance optimizations such as light-weight thread message queues and asynchronous GVT. Furthermore, it supports efficient event broadcasts and pause-rewind-resume functionality to support periodic load balancing and outer loop optimization algorithms.

Chan, Cy↗

Abstract Machine Models and Proxy Architectures for Exascale Computing

To achieve exascale computing, fundamental hardware architectures must change. The most significant consequence of this assertion is the impact on the scientific and engineering applications that run on current high performance computing (HPC) systems, many of which codify years of scientific domain knowledge and refinements for contemporary computer systems. In order to adapt to exascale architectures, developers must be able to reason about new hardware and determine what programming models and algorithms will provide the best blend of performance and energy efficiency into the future. While many details of the exascale architectures are undefined, an abstract machine model is designed to allow application developers to focus on the aspects of the machine that are important or relevant to performance and code structure. These models are intended as communication aids between application developers and hardware architects during the co-design process. We use the term proxy architecture to describe a parameterized version of an abstract machine model, with the parameters added to elucidate potential speeds and capacities of key hardware components. These more detailed architectural models are formulated to enable discussion between the developers of analytic models and simulators and computer hardware architects. They allow for application performance analysis and hardware optimization opportunities. In this report our goal is to provide the application development community with a set of models that can help software developers prepare for exascale. In addition, through the use of proxy architectures, we can enable a more concrete exploration of how well new and evolving application codes map onto future architectures. This second version of the document addresses system scale considerations and provides a system-level abstract machine model with proxy architecture information.

97 MATHEMATICS AND COMPUTING↗

AMReX: a framework for block-structured adaptive mesh refinement

AMReX is a C++ software framework that supports the development of block-structured adaptive mesh refinement (AMR) algorithms for solving systems of partial differential equations (PDEs) with complex boundary conditions on current and emerging architectures. AMR reduces the computational cost and memory footprint compared to a uniform mesh while preserving the local descriptions of different physical processes in complex multiphysics algorithms. Current AMReX-based application codes span a number of areas, including atmospheric modeling, astrophysics, combustion, cosmology, fluctuating hydrodynamics, multiphase flows, and particle accelerators. In particular, the AMReX-Astro GitHub repository holds a number of astrophysical modeling tools based on AMReX. The origins of AMReX trace back to the BoxLib software framework. AMReX supports a number of different time-stepping strategies and spatial discretizations. Solution strategies supported by AMReX range from level-by-level approaches (with or without subcycling in time) with multilevel synchronization to full-hierarchy approaches, and any combination thereof. User-defined kernels that operate on patches of data can be written in C++ or Fortran; there is also a Fortran-interface functionality which wraps the core C++ data structures and operations in Fortran wrappers so that an application code based on AMReX can be written entirely in Fortran.

97 MATHEMATICS AND COMPUTING↗

Mota Mapper: A Multi-Objective Topology-Aware Mapper Library

Mota is a library that provides several heuristics for mapping tasks to compute ranks (processes) on a networked computer cluster or supercomputer. It was originally designed for task placement of adaptive mesh refinement codes (AMR). It is multi-objective in the sense that it simultaneously balances (potentially multiple types of) computational load on each rank as well as the communication traffic between the boxes. The heuristics used for mapping include algorithms such as greedy list assignment and space-filling curves, as well as algorithms from graph analysis such as adjacency matrix bandwidth reduction, recursive bisection, and greedy graph placement.

Chan, Cy↗

AMReX

AMReX is a software framework for the development and implementation of massively parallel algorithms using block-structured adaptive mesh refinement (AMR). Block-structured AMR provides the basis for the temporal and spatial discretization strategy for a large variety of applications of interest to the DOE. AMReX provides a unified infrastructure with the functionality needed for applications to be able to effectively and efficiently utilize machines from laptops to exascale accelerator-based architectures. AMR reduces the computational cost and memory footprint compared to a uniform mesh while preserving accurate descriptions of different physical processes in complex multi-physics algorithms. AMReX supports algorithms that solve systems of partial differential equations (PDEs) in simple or complex geometries, and those that use particles and/or particle-mesh operations to represent component physical processes.

Zhang, Weiqun↗

ExaSat: An Exascale Static Analysis Tool (ExaSat) v1.0

The ExaSAT framework automates the extraction of parameterized performance models directly from source code using compiler analysis. Its parameterized analytic model enables quantitative evaluation of a broad range of hardware design trade-offs and software optimizations on a variety of different performance metrics, with a primary focus on data movement as a metric. ExaSAT analysis provides insights in the hardware and software tradeoffs and lays the groundwork for exploring a more targeted set of design points using cycle-accurate architectural simulators and emulators.

Chan, Cy↗

ExaSAT: An exascale co-design tool for performance modeling

One of the emerging challenges to designing HPC systems is understanding and projecting the requirements of exascale applications. In order to determine the performance consequences of different hardware designs, analytic models are essential because they can provide fast feedback to the co-design centers and chip designers without costly simulations. However, current attempts to analytically model program performance typically rely on the user manually specifying a performance model. Here we introduce the ExaSAT framework that automates the extraction of parameterized performance models directly from source code using compiler analysis. The parameterized analytic model enables quantitative evaluation of a broad range of hardware design trade-offs and software optimizations on a variety of different performance metrics, with a primary focus on data movement as a metric. Finally, we demonstrate the ExaSAT framework’s ability to perform deep code analysis of a proxy application from the Department of Energy Combustion Co-design Center to illustrate its value to the exascale co-design process. ExaSAT analysis provides insights into the hardware and software trade-offs and lays the groundwork for exploring a more targeted set of design points using cycle-accurate architectural simulators.

97 MATHEMATICS AND COMPUTING↗

Software design space exploration for exascale combustion co-design

The design of hardware for next-generation exascale computing systems will require a deep understanding of how software optimizations impact hardware design trade-offs. In order to characterize how co-tuning hardware and software parameters affects the performance of combustion simulation codes, we created ExaSAT, a compiler-driven static analysis and performance modeling framework. Our framework can evaluate hundreds of hardware/software configurations in seconds, providing an essential speed advantage over simulators and dynamic analysis techniques during the co-design process. Our analytic performance model shows that advanced code transformations, such as cache blocking and loop fusion, can have a significant impact on choices for cache and memory architecture. Our modeling helped us identify tuned configurations that achieve a 90% reduction in memory traffic, which could significantly improve performance and reduce energy consumption. These techniques will also be useful for the development of advanced programming models and runtimes, which must reason about these optimizations to deliver better performance and energy efficiency.

97 MATHEMATICS AND COMPUTING↗

A Generalized Framework for Auto-tuning Stencil Computations

This work introduces a generalized framework for automatically tuning stencil computations to achieve superior performance on a broad range of multicore architectures. Stencil (nearest-neighbor) based kernels constitute the core of many important scientific applications involving block-structured grids. Auto-tuning systems search over optimization strategies to find the combination of tunable parameters that maximizes computational efficiency for a given algorithmic kernel. Although the auto-tuning strategy has been successfully applied to libraries, generalized stencil kernels are not amenable to packaging as libraries. Studied kernels in this work include both memory-bound kernels as well as a computation-bound bilateral filtering kernel. We introduce a generalized stencil auto-tuning framework that takes a straightforward Fortran expression of a stencil kernel and automatically generates tuned implementations of the kernel in C or Fortran to achieve performance portability across diverse computer architectures.

97 MATHEMATICS AND COMPUTING↗