Search NASA⌕ Search

Engineering topics

Chance, M

Publications and source records attributed to Chance, M.

31 records · Page 2

Structural studies on Na[subscript 0.75]CoO[subscript 2] thermoelectric material at high pressures

The crystal structure of Na{sub 0.75}CoO{sub 2} was studied at ambient and low temperatures down to 10 K at pressures up to 40 GPa using synchrotron x-rays and a diamond cell in angle dispersion geometry. A reduction in the c/a ratio was observed at both conditions with the application of pressure. An increase in Co-O bond lengths and a decrease in Na-O bond lengths were observed above 10 GPa. The results of the density functional calculations performed agree well with the pressure induced bond length changes. The anomalous change in the c/a ratio and bond lengths indicate a pressure induced isostructural phase transition above 10 GPa. Bulk modulus calculations show this compound is less compressible than its hydrated analogues.

36 MATERIALS SCIENCE↗

X-ray Footprinting at Beamline X28C: A National Resource for Studying Macromolecular Structure and Dynamics

X-ray footprinting employs intense X-rays produced by synchrotron radiation to generate hydroxyl radicals in solution on microseconds-milliseconds timescales. These hydroxyls radicals undergo stable reaction with solvent accessible sites of macromolecule and produce covalent modifications, which are appropriate to probing macromolecule dynamics under physiological condition. For nucleic acids, one analyzes the pattern of fragments after X-ray exposure by gel electrophoresis; the protected sections that are not cleaved yield a 'footprint'. For proteins, the exposed samples are digested with proteases and analyzed by liquid chromatography- and tandem-mass spectrometry to determine the extent and sites of modification. The data provide detailed structural information to map tertiary contacts of macromolecular interactions, which can subsequently be used as constraints for molecular modeling to generate high-resolution structures. This method is unique in providing 'local' structural information in solution for gaining insight into dynamic processes involving, large RNA-protein and protein-protein assemblies on biologically relevant timescales. The method also can uniquely probe the 'local' structure of large complexes poised at equilibrium for functional states of interest, and has been extended to in vivo studies. Beamline X28C is located at the National Synchrotron Light Source of Brookhaven National Laboratory. An expanding set of user groups utilize this national resource funded by the National Institute of Biomedical Imaging and Bioengineering of the National Institutes of Health. The facility is operated by the Center for Synchrotron Biosciences and the Center for Proteomics and Bioinformatics of Case Western Reserve University. The facility supports both onsite and offsite user access. Beam time is allocated online through peer reviewed user proposal system. Examples of recent research projects are provided.

43 PARTICLE ACCELERATORS↗

Integrated Algorithms for High-Throughput Examination of Covalently Labeled Biomolecules by Structural Mass Spectrometry

Mass spectrometry based structural proteomics approaches for probing protein structures are increasingly gaining in popularity. The potential for such studies is limited because of the lack of analytical techniques for the automated interpretation of resulting data. In this article, a suite of algorithms called ProtMapMS is developed, integrated, and implemented specifically for the comprehensive automatic analysis of mass spectrometry data obtained for protein structure studies using covalent labeling. The functions include data format conversion, mass spectrum interpretation, detection, and verification of all peptide species, confirmation of the modified peptide products, and quantification of the extent of peptide modification. The results thus obtained provide valuable data for use in combination with computational approaches for protein structure modeling. The structures of both monomeric and hexameric forms of insulin were investigated by oxidative protein footprinting followed by high-resolution mass spectrometry. The resultant data was analyzed both manually and using ProtMapMS without any manual intervention. The results obtained using the two methods were found to be in close agreement and overall were consistent with predictions from the crystallographic structure.

59 BASIC BIOLOGICAL SCIENCES↗

Structural Waters Define a Functional Channel Mediating Activation of the GPCR, rhodopsin

Structural water molecules may act as prosthetic groups indispensable for proper protein function. In the case of allosteric activation of G protein-coupled receptors (GPCRs), water likely imparts structural plasticity required for agonist-induced signal transmission. Inspection of structures of GPCR superfamily members reveals the presence of conserved embedded water molecules likely important to GPCR function. Coupling radiolytic hydroxyl radical labeling with rapid H2O18 solvent mixing, we observed no exchange of these structural waters with bulk solvent in either ground state or for the Meta II or opsin states. However, the radiolysis approach permitted labeling of selected side chain residues within the transmembrane helices and revealed activation-induced changes in local structural constraints likely mediated by dynamics of both water and protein. These results suggest both a possible general mechanism for water-dependent communication in family A GPCRs based on structural conservation, and a strategy for probing membrane protein structure.

59 BASIC BIOLOGICAL SCIENCES↗

Conserved waters mediate structural and functional activation of family A (rhodopsin-like) G protein-coupled receptors

G protein-coupled receptors with seven transmembrane {alpha}-helices (GPCRs) comprise the largest receptor superfamily and are involved in detecting a wide variety of extracellular stimuli. The availability of high-resolution crystal structures of five prototypical GPCRs, bovine and squid rhodopsin, engineered A2A-adenosine, {beta}1- and {beta}2-adrenergic receptors, permits comparative analysis of features common to these and likely all GPCRs. We provide an analysis of the distribution of water molecules in the transmembrane region of these GPCR structures and find conserved contacts with microdomains demonstrated to be involved in receptor activation. Colocalization of water molecules associating with highly conserved and functionally important residues in several of these GPCR crystal structures supports the notion that these waters are likely to be as important to proper receptor function as the conserved residues. Moreover, in the absence of large conformational changes in rhodopsin after photoactivation, we propose that ordered waters contribute to the functional plasticity needed to transmit activation signals from the retinal-binding pocket to the cytoplasmic face of rhodopsin and that fundamental features of the mechanism of activation, involving these conserved waters, are shared by many if not all family A receptors.

36 MATERIALS SCIENCE↗

Simulation of wave interactions with MHD

The broad scientific objectives of the SWIM (Simulation of Wave Interaction with MHD) project are twofold: (1) improve our understanding of interactions that both radio frequency (RF) wave and particle sources have on extended-MHD phenomena, and to substantially improve our capability for predicting and optimizing the performance of burning plasmas in devices such as ITER: and (2) develop an integrated computational system for treating multiphysics phenomena with the required flexibility and extensibility to serve as a prototype for the Fusion Simulation Project. The Integrated Plasma Simulator (IPS) has been implemented. Presented here are initial physics results on RF effects on MHD instabilities in tokamaks as well as simulation results for tokamak discharge evolution using the IPS.

70 PLASMA PHYSICS AND FUSION TECHNOLOGY↗

Installation and testing of a focusing mirror at beamline X28C for high flux x-ray radiolysis of biological macromolecules

The NSLS X28C white-light beamline has been upgraded with a focusing mirror in order to provide increased x-ray density and a wide selection of beam shapes at the sample position. The cylindrical single crystal silicon mirror uses an Indalloy 51 liquid support bath as both a mechanism for heat transfer and a buoyant support to counter the effects of gravity and correct for minor parabolic slope errors. Calorimetric measurements were performed to verify that the calculated more than 200-fold increase in flux density is delivered by the mirror at the smallest beam spot. The properties of the focused beam relevant to radiolytic footprinting, namely, the physical dimensions of the beam, the effective hydroxyl radical dose delivered to the sample, and sample heating upon irradiation, have been studied at several mirror angles.

46 INSTRUMENTATION RELATED TO NUCLEAR SCIENCE AND ↗

Automated Technologies and Novel Techniques to Accelerate Protein Crystallography for Structrual Genomics

The sequence infrastructure that has arisen through large-scale genomic projects dedicated to protein analysis, has provided a wealth of information and brought together scientists and institutions from all over the world. As a consequence, the development of novel technologies and methodologies in proteomics research is helping to unravel the biochemical and physiological mechanisms of complex multivariate diseases at both a functional and molecular level. In the late sixties, when X-ray crystallography had just been established, the idea of determining protein structure on an almost universal basis was akin to an impossible dream or a miracle. Yet only forty years after, automated protein structure determination platforms have been established. The widespread use of robotics in protein crystallography has had a huge impact at every stage of the pipeline from protein cloning, over-expression, purification, crystallization, data collection, structure solution, refinement, validation and data management- all of which have become more or less automated with minimal human intervention necessary. Here, recent advances in protein crystal structure analysis in the context of structural genomics will be discussed. In addition, this review aims to give an overview of recent developments in high throughput instrumentation, and technologies and strategies to accelerate protein structure/function analysis.

36 MATERIALS SCIENCE↗

Metallomics and Metalloproteomics

Metallomics and metalloproteomics are emerging fields addressing the role, uptake, transport and storage of trace metals essential for protein functions. The methodologies utilized in metallomics and metalloproteomics to provide information on the identity, quantity and function of metalloproteins are discussed. The most widely used approach is through inductively coupled plasma mass spectrometry to identify the metal bound to a protein, and electrospray ionization mass spectrometry to elucidate the structure, dynamics and function of a metal-protein complex. Other approaches include X-ray absorption and X-ray fluorescence spectroscopies, and bioinformatics sequence analysis. X-ray absorption spectroscopy utilizing a synchrotron radiation source is a powerful tool to provide a direct analysis of metal bound to proteins and proteomic metal distribution in biological matrices. With the advent of genome sequencing, a large database of protein primary structures has been established, and specific tools to identify metalloproteins in the genome sequences have been developed.

43 PARTICLE ACCELERATORS↗

Complementary Structural Mass Spectrometry Techniques Reveal Local Dynamics in Functionally Important Regions of a Metastable Serpin

Serpins display a number of highly unusual structural properties along with a unique mechanism of inhibition. Although structures of numerous serpins have been solved by X-ray crystallography, little is known about the dynamics of serpins in their inhibitory active conformation. In this study, two complementary structural mass spectrometry methods, hydroxyl radical-mediated footprinting and hydrogen/deuterium (H/D) exchange, were employed to highlight differences between the static crystal structure and the dynamic conformation of human serpin protein, a1-antitrypsin (a1AT). H/D exchange revealed the distribution of flexible and rigid regions of a1AT, whereas footprinting revealed the dynamic environments of several side chains previously identified as important for the metastability of a1AT. This work provides insights into the unique structural design of a1AT and improves our understanding of its unusual inhibition mechanism. Also, we demonstrate that the combination of the two MS techniques provides a more complete picture of protein structure than either technique alone.

36 MATERIALS SCIENCE↗

Synchrotron Protein Footprinting Supports Substrate Translocation by ClpA via ATP-Induced Movements of the D2 Loop

Synchrotron X-ray protein footprinting is used to study structural changes upon formation of the ClpA hexamer. Comparative solvent accessibilities between ClpA monomer and ClpA hexamer samples are in agreement throughout most of the sequence, with calculations based on two previously proposed hexameric models. The data differ substantially from the proposed models in two parts of the structure: the D1 sensor 1 domain and the D2 loop region. The results suggest that these two regions can access alternate conformations in which their solvent protection is greater than that in the structural models based on crystallographic data. In combination with previously reported structural data, the footprinting data provide support for a revised model in which the D2 loop contacts the D1 sensor 1 domain in the ATP-bound form of the complex. These data provide the first direct experimental support for the nucleotide-dependent D2 loop conformational change previously proposed to mediate substrate translocation.

43 PARTICLE ACCELERATORS↗

The ClpP N-Terminus Coordinates Substrate Access with Protease Active Site Reactivity

Energy-dependent protein degradation machines, such as the Escherichia coli protease ClpAP, require regulated interactions between the ATPase component (ClpA) and the protease component (ClpP) for function. Recent studies indicate that the ClpP N-terminus is essential in these interactions, yet the dynamics of this region remain unclear. Here, we use synchrotron hydroxyl radical footprinting and kinetic studies to characterize functionally important conformational changes of the ClpP N-terminus. Footprinting experiments show that the ClpP N-terminus becomes more solvent-exposed upon interaction with ClpA. In the absence of ClpA, deletion of the ClpP N-terminus increases the initial degradation rate of large peptide substrates 5-15-fold. Unlike ClpAP, ClpP?N exhibits a distinct slow phase of product formation that is eliminated by the addition of hydroxylamine, suggesting that truncation of the N-terminus leads to stabilization of the acyl-enzyme intermediate. These results indicate that (1) the ClpP N-terminus acts as a 'gate' controlling substrate access to the active sites, (2) binding of ClpA opens this 'gate', allowing substrate entry and formation of the acyl-enzyme intermediate, and (3) closing of the N-terminal 'gate' stimulates acyl-enzyme hydrolysis.

43 PARTICLE ACCELERATORS↗

Modeling of Protein Binary Complexes Using Structural Mass Spectrometry Data

In this article, we describe a general approach to modeling the structure of binary protein complexes using structural mass spectrometry data combined with molecular docking. In the first step, hydroxyl radical mediated oxidative protein footprinting is used to identify residues that experience conformational reorganization due to binding or participate in the binding interface. In the second step, a three-dimensional atomic structure of the complex is derived by computational modeling. Homology modeling approaches are used to define the structures of the individual proteins if footprinting detects significant conformational reorganization as a function of complex formation. A three-dimensional model of the complex is constructed from these binary partners using the ClusPro program, which is composed of docking, energy filtering, and clustering steps. Footprinting data are used to incorporate constraints--positive and/or negative--in the docking step and are also used to decide the type of energy filter--electrostatics or desolvation--in the successive energy-filtering step. By using this approach, we examine the structure of a number of binary complexes of monomeric actin and compare the results to crystallographic data. Based on docking alone, a number of competing models with widely varying structures are observed, one of which is likely to agree with crystallographic data. When the docking steps are guided by footprinting data, accurate models emerge as top scoring. We demonstrate this method with the actin/gelsolin segment-1 complex. We also provide a structural model for the actin/cofilin complex using this approach which does not have a crystal or NMR structure.

59 BASIC BIOLOGICAL SCIENCES↗