Search NASA⌕ Search

Engineering topics

Chang, Chong H.

Publications and source records attributed to Chang, Chong H..

Parallel Implicit Hydrodynamics with Material Strength for High Explosive Burn Calculations

High explosives are almost always evolving in some form of metal containment vessel. This fact requires that a materials model for the evolution of the metal containment vessel be part of any simulation of the HE. Since the actual form of the strength model to be used is an open question, we incorporate the material strength properties in a relatively agnostic fashion, which will accommodate many strength models. The only restriction is that the stress components be a function of density, specific internal energy and velocities. In addition, the timescales and rates of the chemical reactions in the HE vary between thousands of seconds and nanoseconds. A hydrodynamics capable of operating in anticipation of the eventual violent release of energy via these chemical reactions is a necessity. The central issue in creating a hydrodynamics capable of spanning these timescales is to forgo the use of a Courant time step control necessary in an explicit hydrodynamics. The Courant time-step arises because of characteristic velocities associated with the material, such as the sound speed or, in materials with strength, characteristic longitudinal and transverse speeds associated with compression and shear. The method used to circumvent the need for a Courant time-step limit is to develop an implicit calculation of the advanced particle pressure and shear modulus derived from the conservation laws of mass, momentum and specific internal energy. This process creates the implicit hydrodynamics needed for the HE calculations of interest to this study.

36 MATERIALS SCIENCE↗

Role of heating and turbulent heat transfer in HE burning and detonation

Enhanced heat transfer model has been developed due to the turbulence in the cracks and pores in the burning fractured HE. This turbulence then serves in the initialization of the turbulence in the product gas. Enhanced heat transfer is also modeled in the turbulent product gas. Numerical simulations of the onset of HE burning and transition to detonation have been performed with and without the turbulent heat transfer model. Computational results indicate that onset of chemical reactions and transition to detonation is induced by the shockwave formed by the pressure rise caused by the heating. In other words, processes similar to shock-to-detonation transition (SDT) could become the driving mechanism for HE explosion and detonation in the case of heating rather than the temperature alone.

45 MILITARY TECHNOLOGY, WEAPONRY, AND NATIONAL DEF↗

Modeling soot growth in Comp-B using a detonation history

A chemical kinetics procedure for soot formation calculation is summarized. By importing Lagrangian hydrodynamic calculations, species history is consistently accounted for. Detonation product composition is assumed in region with the burnt high explosive (HE). Soot formation is calculated using the density and energy obtained in the hydrodynamics calculation of HE detonation. Ideal gas equation-of-state (EOS) with temperature-dependent specific heat is used in the HE product region. Sample calculations show reasonably-expected temperature and soot formation.

42 ENGINEERING↗

Multiphase representation of hotspot formation and growth

Multiphase reacting flow approach has been adopted for modeling of hotspot formation and growth on sub-zonal scale. Mechanical response of the high explosive (HE) is modeled by the Visco-Plastic SCRAM model which includes plastic work, crack growth, and frictional heating along the cracks. In this work a sub-zonal regions with high temperature, hotspots, are modeled as a new phase. Formation and growth of the hotspot phase from the cold phase is modeled as a phase change. Each phase has its own temperature and pressure. Chemical reactions also progress in both phases. The growth of hotspots are determined by the solution of the heat conduction equation with appropriate heat sources due to friction and plastic heating. Sample calculations using the BABBO code show successful detonation calculations with hotspot formation and growth.

73 NUCLEAR PHYSICS AND RADIATION PHYSICS↗

HMX detonation calculation using multi-reaction chain

Detonation of HMX has been simulated using a multi-reaction chain and species equation-of-states. A reacting flow code capable of handling arbitrary number of reactions and species has been used. Computational results are compared to the results produced by a pressure-based single reaction model (AJEX) and a temperature-based single-reaction model. Results show that the multi-reaction approach is capable of producing detonation calculations comparable to the AJEX model calculations, demonstrating that the multi-reaction approach possesses the properties required for the detonation modeling, a prerequisite of deflagration-to-detonation transition modeling.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Estimate of Lorentz force effects on charged particles

Thermonuclear (TN) fusion reaction between deutrons are D + D → T + P D + D → 3 He + n where P is the proton, D is the deuteron, T is the triton, n is the neutron, and 3 He is the helion. They are born with high energies (0.82 MeV for 3 He, 1.01 MeV for T, 3.02 MeV for P, and 2.45 MeV for n). The charged particles slow down due to the drag force (stopping power). While slowing down, the charged particles deposit their energy, which may affect the TN burn characteristics. When magnetic field is present, the velocity of the charged particle would be affected due to the Lorentz force, which can affect the stopping of the charged particle. As a consequence, TN burn characteristics may change, Our purpose is to asses the importance of the Lorentz force in stopping of the charged particle, based on a simple comparison between the Lorentz force and stopping power.

70 PLASMA PHYSICS AND FUSION TECHNOLOGY↗

Burning of particles undergoing stripping breakup

A simple model for condensed-phase particle burning has been presented. Particles are assumed to start burning in quiescent air. Particles are then accelerated, adding convective effects. Convective effect due to the relative motion between the particle and air on heat and mass transfer is included by introducing the Nusselt number. Stripping of liquid is included at higher particle velocity. Evaporation and burning from the stripped tail are also included.

36 MATERIALS SCIENCE↗

Parallel Implicit Hydrodynamics for High Explosive Burn Calculations

High explosives in hostile environments will require calculational capabilities that model processes, which evolve on timescales from minutes to nanoseconds. Eventually the HE will begin to move metal. To handle this temporal evolution an implicit hydrodynamics coupled to the chemical release of the HE energy is required. In addition, the use of chemical kinetics to model the transition from, the initially, slow heating of a confined high explosive through to deflagration and on to detonation requires many computational zones to model high explosive engineering systems. This requirement means that a fully parallel implicit hydrodynamics is essential. In this paper we present the calculation of a nonlinear matrix equation for the advanced particle pressure that has been made parallel and implemented in our AMR code, BABBO. This new parallel implicit hydrodynamics has been applied to a cookoff problem, as well as, one and two dimensional shock problems. Results are presented and discussed.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Numerical simulations of onset and growth of Rayleigh–Taylor instability involving solids in converging geometry

Numerical simulation of Rayleigh–Taylor instabilities involving solids has been carried out in a spherically converging geometry. A solid shell is driven toward the center by high-pressure gas outside. Low-pressure gas inside the shell is then compressed, causing the solid shell to slow down and eventually bounce back. Here, simulation results show the absence of the onset condition unlike in the planar geometry equivalent. Results also show that disturbance growth seems to be strongly associated with the deformation direction instead of the acceleration direction. For example, when the interface is compressed in the cross-stream direction, the disturbance at the gas–solid interface grows even under the Rayleigh–Taylor stable situation.

71 CLASSICAL AND QUANTUM MECHANICS, GENERAL PHYSIC↗

Interface area transport of monodispersed spherical particulates

We present an interface area transport model required in tracking of mass, momentum, and energy exchange between dispersed and background materials. The basic transport equation has been rigorously derived from the volume fraction evolution equation. Interface area changes due to mass transport and local compression/expansion are included. The model is then simplified for the case in which the dispersed phase is composed of spheres of locally uniform size. A procedure for calculating advective flux with interface reconstruction has been suggested.

71 CLASSICAL AND QUANTUM MECHANICS, GENERAL PHYSIC↗