Search NASA⌕ Search

Engineering topics

Chang, I-Dee

Publications and source records attributed to Chang, I-Dee.

9 records
All sourcesNASA NTRSDOE OSTI
NASA NTRS1994

Computed Flow Through An Artificial Heart And Valve

NASA technical memorandum discusses computations of flow of blood through artificial heart and through tilting-disk artificial heart valve. Represents further progress in research described in "Numerical Simulation of Flow Through an Artificial Heart" (ARC-12478). One purpose of research to exploit advanced techniques of computational fluid dynamics and capabilities of supercomputers to gain understanding of complicated internal flows of viscous, essentially incompressible fluids like blood. Another to use understanding to design better artificial hearts and valves.

Rogers, Stuart E.↗
NASA NTRS1994

Computed Flow Through An Artificial Heart Valve

Report discusses computations of blood flow through prosthetic tilting disk valve. Computational procedure developed in simulation used to design better artificial hearts and valves by reducing or eliminating following adverse flow characteristics: large pressure losses, which prevent hearts from working efficiently; separated and secondary flows, which causes clotting; and high turbulent shear stresses, which damages red blood cells. Report reiterates and expands upon part of NASA technical memorandum "Computed Flow Through an Artificial Heart and Valve" (ARC-12983). Also based partly on research described in "Numerical Simulation of Flow Through an Artificial Heart" (ARC-12478).

Rogers, Stewart E.↗
NASA NTRS1992

Heat shield erosion in a dusty Martian atmosphere

The study calculates the effects of dust particle impacts on the erosion of the forebody heat shield for a 26-m diameter aerobraking vehicle entering the Martian atmosphere at 8.6 km/s. An explicit thin-layer Navier-Stokes code is used to compute the dustless flowfield about the vehicle for the actual Martian atmospheric composition. The deceleration and melting of the dust particles within the forebody shock layer was computed for dust spherules having initial diameters from 1 to 19 microns. All the particles began vaporizing shortly after entering the shock layer, but most survived to hit the heat shield surface. The two different heat shield materials considered were Shuttle ceramic tiles with glassy surfaces and a moderate-density ablator. For a vehicle with a ballistic coefficient of 200 kg/sq m, a glassy heat shield surface experienced an average of 7 mm of surface erosion, or 20 times the thickness of the glassy layer on ceramic tiles.

Papadopoulos, Periklis↗
NASA NTRS1991

Simulation of blood flow through an artificial heart

A numerical simulation of the incompressible viscous flow through a prosthetic tilting disk heart valve is presented in order to demonstrate the current capability to model unsteady flows with moving boundaries. Both steady state and unsteady flow calculations are done by solving the incompressible Navier-Stokes equations in 3-D generalized curvilinear coordinates. In order to handle the moving boundary problems, the chimera grid embedding scheme which decomposes a complex computational domain into several simple subdomains is used. An algebraic turbulence model for internal flows is incorporated to reach the physiological values of Reynolds number. Good agreement is obtained between the numerical results and experimental measurements. It is found that the tilting disk valve causes large regions of separated flow, and regions of high shear.

Kiris, Cetin↗
NASA NTRS1990

Aerobraking in a dusty Martian atmosphere

The effects of dust particle impacts on the erosion of the heat shield were estimated for a 26 m diameter aerobraking vehicle entering the Mars atmosphere at 8.6 km/sec. An explicit Navier-Stokes code was used to compute the flow field about the vehicle for the actual Martian atmospheric composition at a speed of 7.5 km/sec. The deceleration and melting of the dust particles within the forebody shock-layer was computed for dust spherules having initial diameters from 3 to 10 microns. Two heat shield materials were considered: Shuttle tiles with glassy surfaces and a low-density ablator known as Avcoat.

Chang, I-Dee↗
NASA NTRS1990

Numerical simulation of the incompressible internal flow through a tilting disk valve

A numerical simulation of the incompressible viscous flow through a prosthetic tilting disk heart valve is presented in order to demonstrate the current capability to model unsteady flows with moving boundaries. Both steady and unsteady flow calculations are performed by solving the incompressible Navier-Stokes equations in three-dimensional generalized curvilinear coordinates. In order to handle the moving boundary problems, the chimera grid embedding scheme which decomposes a complex computational domain into several simple subdomains is used. An algebraic turbulence model for internal flows is incorporated to reach the physiological values of Reynolds number. Good agreement is obtained between the numerical results and experimental measurements. It is found that the tilting disk valve causes large regions of separated flow, and regions of high shear.

Chang, I-Dee↗
NASA NTRS1990

Numerical simulation of flow through biofluid devices

The results of a numerical simulation of flow through an artificial heart and through an artificial tilting-disk heart valve are presented. The simulation involves solving the incompressible Navier-Stokes equations; the solution process is described. The details and difficulties of modeling these particular geometries are discussed. The artificial heart geometry uses a single moving grid, and the valve computation uses an overlaid-grid approach with one moving grid and one stationary grid. The equations must be solved iteratively for each discrete time step of the computations, requiring a significant amount of computing time. It is particularly difficult to analyze and present the fluid physics represented by these calculations because of the time-varying nature of the flow, and because the flows are internal. Three-dimensional graphics and scientific visualization techniques have become instrumental in solving these problems.

Rogers, Stuart E.↗
NASA NTRS1981

Combination of Kinematics with Flow Visualization to Compute Total Circulation

A method is described in which kinematics is exploited to compute the total circulation of a vortex from relatively simple flow visualization experiments. There are several advantages in the technique, including the newly acquired ability to calculate the changes in strength of a single vortex as it evolves. The main concepts and methodology are discussed in a general way for application to vortices which carry along with them definable regions of essentially irrotational fluid; however, the approach might be generalized to other flows which contain regions of concentrated vorticity. As an illustrative example, an application to the study of the transient changes in total circulation of individual vortex rings as they travel up a tube is described, taking into account the effect of the tube boundary. The accuracy of the method, assessed in part by a direct comparison with a laser Doppler measurement is felt to be well within experimental precision for vortex rings over a wide range of Reynolds numbers.

Brasseur, J. G↗