Search NASA⌕ Search

Engineering topics

Chang, Jane P

Publications and source records attributed to Chang, Jane P.

Metal oxide core shell nanostructures as building blocks for efficient light emission (SISGR)

The objective of this research is to synthesize core-shell nano-structured metal oxide materials and investigate their structural, electronic and optical properties to understand the microscopic pathways governing the energy conversion process, thereby controlling and improving their efficiency. Specifically, the goal is to use a single metal oxide core-shell nanostructure and a single excitation source to generate photons with long emission lifetime over the entire visible spectrum and when controlled at the right ratio, generating white light. In order to achieve this goal, we need to control the energy transfer between light emitting elements, which dictates the control of their interatomic spacing and spatial distribution. We developed an economical wet chemical process to form the nanostructured core and to control the thickness and composition of the shell layers. With the help from using DOE funded synchrotron radiation facility, we delineated the growth mechanism of the nano-structured core and the shell layers, thereby enhancing our understanding of structure-property relation in these materials. Using the upconversion luminescence and the lifetime measurements as effective feedback to materials sysnthes is and integration, we demonstrated improved luminescence lifetimes of the core-shell nano-structures and quantified the optimal core-multi-shell structure with optimum shell thickness and composition. We developed a rare-earths co-doped LaPO 4 core-multishell structure in order to produce a single white light source. It was decided that the mutli-shell method would produce the largest increase in luminescence efficiency while limiting any energy transfer that may occur between the dopant ions. All samples resulted in emission spectra within the accepted range of white light generation based on the converted CIE color coordinates. The white light obtained varied between warm and cool white depending on the layering architecture, allowing for the utilization into a wide range of applications. With DOE’s overall mandate to reduce the US’s dependence on rare-earth elements, this work demonstrated how to make every RE atom count toward white light generation by controlling their spatial distribution thereby significantly reducing the amount needed. This is one approach toward reducing the dependence on RE elements and the strategies we developed can be used in discovering RE-free systems. The project is of benefit to the general public as it improves the optical efficiency of these materials, while reducing US’s dependence on RE elements.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗

Plasma etching of Hf-based high-k thin films. Part I. Effect of complex ions and radicals on the surface reactions

The effect of ion and radical compositions in BCl{sub 3}/Cl{sub 2} plasmas was assessed in this work with a focus on the formation of etch products in patterning hafnium aluminate, a potential high-k gate oxide material. The plasma composition became increasingly more complex as the percentage of boron trichloride was increased, which led to the formation of a significant amount of boron-containing species including B{sup +}, BCl{sup +}, BCl{sub 2}{sup +}, BCl{sub 3}{sup +}, B{sub 2}Cl{sub 3}{sup +}, and B{sub 2}OCl{sub 3}{sup +} in the plasma. The BCl{sub 2}{sup +} ions were found to be the dominant species in BCl{sub 3} containing plasmas at most conditions; however, increasing the pressure or decreasing the power led to an increase in the formation of higher mass ions. Several compositions of Hf{sub 1-x}Al{sub x}O{sub y} thin films ranging from pure HfO{sub 2} to pure Al{sub 2}O{sub 3} were etched in BCl{sub 3}/Cl{sub 2} plasmas as functions of ion energy and plasma composition. The etch product distributions were measured and the dominant metal-containing etch products were HfCl{sub x} and AlCl{sub x} in a Cl{sub 2} plasma and HfCl{sub x}, HfBOCl{sub 4}, and Al{sub x}Cl{sub y} in a BCl{sub 3} plasma, and their concentrations increased with increasing ion energy. Oxygen was detected removed in the form of ClO in Cl{sub 2} and as trichloroboroxin ((BOCl){sub 3}) in BCl{sub 3}. Both the etch rate and the etch product formation are enhanced in BCl{sub 3}/Cl{sub 2} plasmas, as compared to those in Cl{sub 2} plasmas, due to the change in the composition and reactivity of the dominant ions and radicals.

36 MATERIALS SCIENCE↗

Plasma etching of Hf-based high-k thin films. Part II. Ion-enhanced surface reaction mechanisms

The mechanism for ion-enhanced chemical etching of hafnium aluminate thin films in Cl{sub 2}/BCl{sub 3} plasmas was investigated in this work, specifically how the film composition, ion energy, and plasma chemistry determine their etch rates. Several compositions of Hf{sub 1-x}Al{sub x}O{sub y} thin films ranging from pure HfO{sub 2} to pure Al{sub 2}O{sub 3} were etched in BCl{sub 3}/Cl{sub 2} plasmas and their etch rates were found to scale with {radical}(E{sub ion}) in both Cl{sub 2} and BCl{sub 3} plasmas. In Cl{sub 2} plasmas, a transition point was observed around 50 eV, where the etch rate was significantly enhanced while the linear dependence to {radical}(E{sub ion}) was maintained, corresponding to a change in the removal of fully chlorinated to less chlorinated reaction products. In BCl{sub 3} plasma, deposition dominates at ion energies below 50 eV, while etching occurs above that energy with an etch rate of three to seven times that in Cl{sub 2}. The faster etch rate in BCl{sub 3} was attributed to a change in the dominant ion from Cl{sub 2}{sup +} in Cl{sub 2} plasma to BCl{sub 2}{sup +} in BCl{sub 3}, which facilitated the formation of more volatile etch products and their removal. The surface chlorination (0-3 at. %) was enhanced with increasing ion energy while the amount of boron on the surface increases with decreasing ion energy, highlighting the effect of different plasma chemistries on the etch rates, etch product formation, and surface termination.

36 MATERIALS SCIENCE↗

Plasma etching of Hf-based high-k thin films. Part III. Modeling the reaction mechanisms

A generalized etch rate model was formulated to describe metal oxide etching in complex plasma chemistries, based on the understanding gained from detailed plasma characterization and experimental investigation into the metal oxide etching mechanisms. Using a surface site balance-based approach, the correct etch rate dependencies on neutral-to-ion flux ratio, ion energy, competing deposition and etching reaction pathways, and film properties were successfully incorporated into the model. The applicability of the model was assessed by fitting to experimental etch rate data in both Cl{sub 2} and BCl{sub 3} chemistries. Plasma gas phase analysis as well as etch and deposition rate measurements were used to calculate initial values and appropriate ranges for model parameter variation. Physically meaningful parameter values were extracted from the modeling fitting to the experimental data, thereby demonstrating the applicability of this model in assessing the plasma etching of other complex materials systems.

36 MATERIALS SCIENCE↗

Characteristics of Hf-silicate thin films synthesized by plasma enhanced atomic layer deposition

Hafnium silicate films were grown by alternating the deposition cycles of hafnium oxide and silicon oxide using a plasma enhanced atomic layer deposition process. The as-deposited and 900 deg. C annealed hafnium silicate films were determined to be amorphous using grazing incidence x-ray diffraction. This suggested that the formation of hafnium silicate suppressed the crystallization of HfO{sub 2} at high temperatures. The dielectric constants increased from {approx}5 to {approx}17 as the hafnium content increased from 9 to 17 at. % in the hafnium silicate films. The leakage currents through the Hf-rich Hf-silicate films were two to three orders of magnitude lower than that of SiO{sub 2} with the same equivalent oxide thickness in the range of 1.6-2.3 nm. The estimated band gap of Hf-silicate films from the O 1s plasma loss spectra increased with the increasing Si content due to the higher band gap of SiO{sub 2} than that of HfO{sub 2}.

36 MATERIALS SCIENCE↗