Engineering topics

Chang, Leon

Publications and source records attributed to Chang, Leon.

6 records

NASA NTRS1993

Incompressible Navier-Stokes Calculations in Pump Flows

Flow through pump components, such as the SSME-HPFTP Impeller and an advanced rocket pump impeller, is efficiently simulated by solving the incompressible Navier-Stokes equations. The solution method is based on the pseudo compressibility approach and uses an implicit-upwind differencing scheme together with the Gauss-Seidel line relaxation method. The equations are solved in steadily rotating reference frames and the centrifugal force and the Coriolis force are added to the equation of motion. Current computations use one-equation Baldwin-Barth turbulence model which is derived from a simplified form of the standard k-epsilon model equations. The resulting computer code is applied to the flow analysis inside an 11-inch SSME High Pressure Fuel Turbopump impeller, and an advanced rocket pump impeller. Numerical results of SSME-HPFTP impeller flow are compared with experimental measurements. In the advanced pump impeller, the effects of exit and shroud cavities are investigated. Flow analyses at design conditions will be presented.

Kiris, Cetin↗

NASA NTRS1993

Computation of incompressible viscous flows through turbopump components

Flow through pump components, such as an inducer and an impeller, is efficiently simulated by solving the incompressible Navier-Stokes equations. The solution method is based on the pseudocompressibility approach and uses an implicit-upwind differencing scheme together with the Gauss-Seidel line relaxation method. the equations are solved in steadily rotating reference frames and the centrifugal force and the Coriolis force are added to the equation of motion. Current computations use a one-equation Baldwin-Barth turbulence model which is derived from a simplified form of the standard k-epsilon model equations. The resulting computer code is applied to the flow analysis inside a generic rocket engine pump inducer, a fuel pump impeller, and SSME high pressure fuel turbopump impeller. Numerical results of inducer flow are compared with experimental measurements. In the fuel pump impeller, the effect of downstream boundary conditions is investigated. Flow analyses at 80 percent, 100 percent, and 120 percent of design conditions are presented.

Kiris, Cetin↗

NASA NTRS1993

Incompressible Navier-Stokes computations of rotating flows

Flow through pump components, such as an inducer and an impeller, is efficiently simulated by solving the incompressible Navier-Stokes equations. The solution method is based on the pseudocompressibility approach and uses an implicit-upwind differencing scheme together with the Gauss-Seidel line relaxation method. Current computations use one-equation Baldwin-Barth turbulence model which is derived from a simplified form of the standard k-epsilon model equations. The resulting computer code is applied to the flow analysis inside a generic rocket engine pump inducer, a fuel pump impeller, and SSME high-pressure fuel turbopump impeller. Numerical results of inducer flow are compared with experimental measurements. Flow analyses at 80-, 100-, and 120-percent of design conditions are presented.

Kiris, Cetin↗

NASA NTRS1993

Multigrid convergence of an implicit symmetric relaxation scheme

Multigrid has been applied to an existing three-dimensional compressible Euler solver to accelerate the convergence of the implicit symmetric relaxation scheme. This lower-upper symmetric Gauss-Seidel implicit scheme is shown to be an effective multigrid driver in three-dimensions. A grid refinement study is performed including the effects of large cell aspect ratio meshes. Performance figures of the present multigrid code on Cray computers including the new C90 are presented. A reduction of three orders of of magnitude in the residual for a three-dimensional transonic inviscid flow using 920K grid points is obtained in less than 4 minutes on a Cray C90.

Yoon, Seokkwan↗

NASA NTRS1989

Computations of three-dimensional steady and unsteady viscous incompressible flows

The INS3D family of computational fluid dynamics computer codes is presented. These codes are used to as tools in developing and assessing algorithms for solving the incompressible Navier-Stokes equations for steady-state and unsteady flow problems. This work involves applying the codes to real-world problems involving complex three-dimensional geometries. The algorithms utilized include the method of pseudocompressibility including both central and upwind differencing, several types of artificial dissipation schemes, approximate factorization, and an implicit line-relaxation scheme. These codes have been validated using a wide range of problems including flow over a backward-facing step, driven cavity flow, flow through various types of ducts, and steady and unsteady flow over a circular cylinder. Many diverse flow applications have been solved using these codes including parts of the Space Shuttle Main Engine, problems in naval hydrodynamics, low-speed aerodynamics, and biomedical fluid flows. The presentation details several of these, including the flow through a Space Shuttle Main Engine inducer, vortex shedding behind a circular cylinder, and flow through an artificial heart.

Kwak, Dochan↗

NASA NTRS1989

LU-SGS implicit algorithm for three-dimensional incompressible Navier-Stokes equations with source term

A numerical method is developed for solving the incompressible Navier-Stokes equations using the concept of pseudocompressibility. A lower-upper symmetric-Gauss-Seidel implicit scheme is developed for three-dimensional incompressible viscous flow computations. The present algorithm offers additional advantages when solving the flow equations with source terms. Complete vectorizability of the algorithm on oblique planes of sweep in three-dimensions is accomplished in a new flow solver, INS3D-LU code. Spatial differencing is a second-order accurate semi-discrete finite-volume method augmented by a third-order accurate numerical dissipation model which is based on spectral-radii. Comparison of numerical solutions for a curved duct with experimental data shows good agreement. The method is applied to calculate the inducer flow of the Space Shuttle Main Engine turbopump.

Yoon, Seokkwan↗