Search NASA⌕ Search

Engineering topics

Chapman, B. E.

Publications and source records attributed to Chapman, B. E..

7 records
All sourcesNASA NTRSDOE OSTI
DOE OSTI2024

Tokamak Plasmas with Density up to 10 Times the Greenwald Limit

Current-carrying, toroidal laboratory plasmas typically cannot be sustained with an electron density above the empirical Greenwald limit. Presented here are tokamak experiments in the Madison Symmetric Torus with a density up to an unprecedented level about ten times this limit. This is thought to be made possible in part by a thick, stabilizing, conductive wall, and a high-voltage, feedback-controlled power supply driving the plasma current. The radial profile of the toroidal current flattens around twice the limit, without the edge collapse routinely observed in other experiments.

70 PLASMA PHYSICS AND FUSION TECHNOLOGY↗
DOE OSTI2023

MST resistive wall tearing mode simulations

Here, the Madison Symmetric Torus (MST) is a toroidal device that, when operated as a stan dard tokamak, does not have major disruptions. Unlike most tokamaks, the MST plasma is surrounded by a close fitting highly conducting wall, with a resistive wall penetration time two orders of magnitude longer than in JET or DIII-D, and three times longer than in ITER. The MST can operate with edge q a ⩽ 2, unlike standard tokamaks. Simulations presented here indicate that the MST is unstable to resistive wall tearing modes (RWTMs) and resistive wall modes (RWMs). They could in principle cause disruptions, but the predicted thermal quench time is much longer than the experimental pulse time. If the MST thermal quench time were comparable to measurements in JET and DIII-D, theory and simulations predict that disruptions would have been observed in MST. This is consistent with the modeling herein, predicting that disruptions are caused by RWTMs and RWMs. In the low q a ~ 2 regime of MST, the RWTM asymptotically satisfies the RWM dispersion relation. The transition from RWTM to RWM occurs smoothly at q a = m/n, where m, n are poloidal and toroidal mode numbers.

70 PLASMA PHYSICS AND FUSION TECHNOLOGY↗
DOE OSTI2022

Self-organized magnetic equilibria in tokamak plasmas with very low edge safety factor

Tokamak plasmas often exhibit self-organizing behavior in which internal modes shape the toroidal current density profile, a common example being the sawtooth instability. However, such behavior has not been studied in detail for edge safety factor below 2 due to disruptive kink instabilities that typically prevent operation in this regime. Now, steady tokamak plasmas with an edge safety factor down to 0.8 have been created in the Madison Symmetric Torus, where disruptions are prevented due to a thick, conductive wall and a feedback power supply that sustains the plasma current. Internal measurements and nonlinear magnetohydrodynamic modeling reveal a family of safety factor profiles with a central value clamped near unity as the edge safety factor decreases, indicating current profile broadening through a relaxation process. Furthermore, as the safety factor decreases, the magnetic fluctuations become irregular, and the electron energy confinement time decreases.

70 PLASMA PHYSICS AND FUSION TECHNOLOGY↗
DOE OSTI2022

Computational study of runaway electrons in MST tokamak discharges with applied resonant magnetic perturbation

A numerical study of magnetohydrodynamics (MHD) and tracer-particle evolution investigates the effects of resonant magnetic perturbations (RMPs) on the confinement of runaway electrons (REs) in tokamak discharges conducted in the Madison Symmetric Torus. In computational results of applying RMPs having a broad toroidal spectrum but a single poloidal harmonic, m = 1 RMP does not suppress REs, whereas m = 3 RMP achieves significant deconfinement but not the complete suppression obtained in the experiment. MHD simulations with the NIMROD code produce sawtooth oscillations, and the associated magnetic reconnection can affect the trajectory of REs starting in the core region. Simulations with m = 3 RMP produce chaotic magnetic topology over the outer region, but the m = 1 RMP produces negligible changes in field topology, relative to applying no RMP. Using snapshots of the MHD simulation fields, full-orbit relativistic electron test particle computations with KORC show ≈50% loss from the m = 3 RMP compared to the 10%–15% loss from the m = 1 RMP. Here, test particle computations of the m = 3 RMP in the time-evolving MHD simulation fields show correlation between MHD activity and late-time particle losses, but total electron confinement is similar to computations using magnetic-field snapshots.

70 PLASMA PHYSICS AND FUSION TECHNOLOGY↗
DOE OSTI2021

Direct measurements of the 3D plasma velocity in single-helical-axis RFP plasmas

The first local velocity measurements of helical equilibrium plasmas in the Reversed Field Pinch (RFP) Single Helical Axis (SHAx) state using a Charge Exchange Recombination Spectroscopy (CHERS) diagnostic are presented. Measurements show strong axisymmetric and non-axisymmetric flow, with n ¼ 5 components of flow related to the ðm; nÞ¼ð1; 5Þ dominant magnetic mode on the order of the axisymmetric flow in certain regions of the plasma, as well as significant n > 5 flow. Flow measurements are compared with NIMROD simulations of visco-resistive, single-fluid MHD in toroidal and cylindrical geometries with limited axial periodicity. Both measurements and the simulation with toroidal geometry show stronger inboard flows relative to the outboard flows, which is attributed to the toroidal geometry of the device. In the experiment, the n ¼ 5 component of flow is phase shifted from the reconnection-like flow pattern observed in the single-fluid simulations, possibly due to decoupling of the ion and electron fluids over much of the plasma. Finally, the strength of the helical angular flow shear relative to the critical shear necessary to disrupt nonlinear coupling between tearing modes is calculated around the helical magnetic axis. The shear in the measured flow is on the order of the theoretical critical threshold needed to nonlinearly decouple modes, but the measurement uncertainty in the gradient of the flow is large.

70 PLASMA PHYSICS AND FUSION TECHNOLOGY↗
DOE OSTI2020

Generation and suppression of runaway electrons in MST tokamak plasmas

This paper discusses the behavior of runaway electrons in tokamak plasmas at low electron density, plasma current, and magnetic field using experimental data from the Madison Symmetric Torus and computational data from the NIMROD nonlinear resistive 3D MHD code. Density thresholds for the onset and suppression of runaway electrons are determined experimentally in steady tokamak plasmas, and in plasmas with a population of runaway electrons, resonant magnetic perturbations with different poloidal mode numbers are applied. Poloidal mode number m = 3 perturbations suppress the runaway electrons, while perturbations with m = 1 have little effect. This difference is consistent with the difference in computed magnetic topologies. The m = 1 RMP has minimal effect on the topology, while the m = 3 RMP produces a broad region of stochasticity, which can allow for rapid loss of the runaway electrons.

70 PLASMA PHYSICS AND FUSION TECHNOLOGY↗