Engineering topics
Publications and source records attributed to Chapman, C..
The alphas sublibrary aims to describe nuclear reactions between incident alpha particles and different nuclei. For ENDF/B-VIII.1, the LLNL ECPL evaluation for 6Li, and the JENDL-based NNL evaluations of 9 Be and 16,17 O were adopted. Also, there were minor fixes done to 4 He.
The atomic relaxation sublibrary aims to describe atomic binding energies. For ENDF/B-VIII.1 we adopted the EPICS2023 EADL evaluations.
The decay sublibrary aims to describe all known spontaneous decays and branching ratios for all nuclei across the nuclide chart. ENDF/B-VIII.1 remains unchanged from ENDF/B-VIII.0 for the decay sublibrary.
The deuterons sublibrary aims to describe nuclear reactions between incident deuteron particles and different nuclei. For ENDF/B-VIII.1, we adopted additions and corrections to the ENDF/B-VIII.0 d+t file, as well as new LANL evaluation updates for 3 He and 6 Li.
The electrons sublibrary aims to describe electron-atomic cross section data, corresponding to the interaction between electrons and the different atoms. For ENDF/B-VIII.1 we adopted the EPICS2023 EEDL evaluations.
The ENDF/B-VIII.1 release is the newest evaluated nuclear data library produced, distributed, and recommended by CSEWG for use in nuclear science and technology applications. Among the many key advances, relative to the previous version ENDF/B-VIII.0, are: re-evaluation of 239Pu file by a joint international effort; updated 16,18O, 19F, 28-30Si, 50-54Cr, 55Mn, 54,56,57Fe, 63,65Cu, 139La, 233,235,238U, and 240,241Pu neutron nuclear data by the IAEA-coordinated INDEN collaboration; significant changes for 3He, 6Li, 9Be, 51V, 88Sr, 103Rh, 140,142Ce, Dy, 181Ta, Pt, 206-208Pb, and 234,236U neutron data; new nuclear data for the photo-nuclear, being 196 adopted from the IAEA2019 Photonuclear Data Library and one new file from JENDL-5; and new evaluations for the charged-particle and atomic sublibraries. Numerous thermal neutron scattering kernels were re-evaluated or provided for the very first time. Additionally, new covariance testing was implemented. ENDF/B-VIII.1 reduced bias in the simulations of many integral experiments with particular progress noted for fluorine, copper and stainless steel containing benchmarks. Data issues which had hindered the deployment of ENDF/B-VIII.0 for commercial nuclear power applications in high burn-up situations, were addressed. ENDF/B-VIII.1 data are distributed in both ENDF-6 and GNDS formats.
The photonuclear sublibrary aims to describe nuclear reactions between incident gamma particles and different nuclei. For ENDF/B-VIII.1, we adopted around 200 evaluations from the IAEA Coordinated Research Project (CRP) on photonuclear data while, for a few select mission-critical materials, evaluations from ENDF/B-VIII.0 were maintained. Additionally, many fixes to many files were implemented. Finally, ENDF/B-VIII.1 includes a new photonuclear file, 242 Pu, which was adopted from JENDL-5.0.
The Helium-3 (Helions) sublibrary aims to describe nuclear reactions between incident 3 He particles and different nuclei. For ENDF/B-VIII.1, we adopted a new 4He evaluation from the INDEN collaboration and the LLNL ECPL evaluation for 7 Li.
The neutrons sublibrary aims to describe nuclear reactions between incident neutron particles and different nuclei. For ENDF/B-VIII.1, many neutron files were re-evaluated or received major changes. A new 239Pu evaluation was jointly-produced by IAEA, LANL, LLNL and ORNL bringing important updates to fission neutron multiplicity, Prompt Fission Neutron Spectrum, resonance and fast regions. Around one third of the new neutron evaluations were performed as part of the INDEN collaboration, including 16,18 O, 19 F, 28,29,30 Si, 63,65 Cu, 50,51,52,53,54 Cr, 55 Mn, 54,56,57 Fe, 139 La, 233,235,238 U, 240,241 Pu. Important non-INDEN evaluations include 234,236 U, 206,207,208 Pb, 181 Ta, 88 Sr, 140,142 Ce, Pt and Dy isotopes, and many others. Also, dosimetry reactions from IRDFF-II were adopted for many materials.
The neutron-induced fission yields (NFY) sublibray aims to describe fission yields in neutron-induced reactions. For ENDF/B-VIII.1, there were no new fission yields complete evaluations. However, an important fix the 241 Pu NFY file was implemented, solving a long-standing anomalous discontinuity issue accidentally introduced in ENDF/B-VI.2, decades ago. Additionally, many erroneously large uncertainties, present in NFY from ENDF/B-VIII.0, were corrected.
The photo-atomic sublibrary aims to describe atomic photon cross section data, corresponding to the interaction between photons and the different atoms. For ENDF/B-VIII.1 we adopted the EPICS2023 EPDL evaluations.
The protons sublibrary aims to describe nuclear reactions between incident proton particles and different nuclei. For ENDF/B-VIII.1, compared to ENDF/B-VIII.0, there were only evaluation updates for 4 He.
The spontaneous fission yields (SFY) sublibray aims to describe fission yields that happen spontaneous, without any incident particle. For ENDF/B-VIII.1, there were no new fission yields complete evaluations. However, many erroneously large uncertainties, present in both SFY from ENDF/B-VIII.0, were corrected.
The neutron standards sublibrary describes specific reaction cross sections, in a limited range, that are so well-known that they are used as ratios or references in other measurements. ENDF/B-VIII.1 remains unchanged from ENDF/B-VIII.0 for the neutron standards sublibrary
The thermal neutron scattering law (TSL) sublibrary aims to describe the interaction of incident neutrons at thermal or sub-thermal energies with different compound materials such fuels, moderators and special-purpose materials. In ENDF/B-VIII.1 there was a large number of new and updated TSL evaluations, including traditional moderators (light water, Beryllium metal, Beryllium Oxide, Calcium Hydride, plastics (Polystyrene and Lucite), graphite (reactor-grade and crystalline), anhydrous Hydrogen Fluoride, and heavy paraffinic oil); exotic moderators (Beryllium Carbide, Zirconium Hydride, Yttrium Hydride, Lithium-7 Hydride and Deuteride), FLiBe molten salt, structural materials and cladding (Silicon Carbide, Silicon Dioxide, Zirconium Carbide), fuels (Plutonium Dioxide, Uranium Carbide, Uranium metal, Uranium Nitride, Uranium Dioxide, Uranium Hydride), and special purpose materials. In ENDF/B-VIII.1 we also distribute alongside the evaluated files, a comma-separated file (CSV), named TSL_MAT_numbers.csv, which lists all evaluated files in the current release and their corresponding unique MAT number.
The tritons sublibrary aims to describe nuclear reactions between incident triton particles and different nuclei. For ENDF/B-VIII.1, compared to ENDF/B-VIII.0, there were only evaluation updates for 4 He.
The successful expansion of development, innovation, and production within the aeronautics industry during the 20th century was facilitated by collaboration of government agencies with the commercial aviation companies. One of the initial products conceived from the collaboration was the ANC-5 Bulletin, first published in 1937. The ANC-5 Bulletin had intended to standardize the requirements of various government agencies in the design of aircraft structure. The national space policy shift in priority for NASA with an emphasis on transferring the travel to low earth orbit to commercial space providers highlights an opportunity and a need for the national and global space industries. The same collaboration and standardization that is documented and maintained by the industry within MIL-HDBK-5 (MMPDS-01) and MIL-HBDK-17 (nonmetallic mechanical properties) can also be exploited to standardize the thermal performance properties, processing methods, test methods, and analytical methods for use in aircraft and spacecraft design and associated propulsion systems. In addition to the definition of thermal performance description and standardization, the standardization for test methods and analysis for extreme environments (high temperature, cryogenics, deep space radiation, etc) would also be highly valuable to the industry. Its subsequent revisions and conversion to MIL-HDBK-5 and then MMPDS-01 established and then expanded to contain standardized mechanical property design values and other related design information for metallic materials used in aircraft, missiles, and space vehicles. It also includes guidance on standardization of composition, processing, and analytical methods for presentation and inclusion into the handbook. This standardization enabled an expansion of the technologies to provide efficiency and reliability to the consumers. It can be established that many individual programs within the government agencies have been overcome with development costs generated from these nonstandard requirements. Without industry standardization and acceptance, the programs are driven to shoulder the costs of determining design requirements, performance criteria, and then material qualification and certification. A significant investment that the industry could make to both reduce individual program development costs and schedules while expanding commercial space flight capabilities would be to invest in standardizing material performance properties for high temperature, cryogenic, and deep space environments for both metallic and nonmetallic materials.
We report on our effort to develop algorithms to detect, size, and classify geological features in planetary and asteroidal data sets.