Search NASA⌕ Search

Engineering topics

Charles R Ruggeri

Publications and source records attributed to Charles R Ruggeri.

6 records
All sourcesNASA NTRSDOE OSTI
NASA NTRS2026

Impact Testing of 410 Stainless Steel for Material Impact Model Development

A project is underway to develop a consistent set of material properties, impact test data, and failure analysis for a variety of metallic aircraft materials that can be used to develop improved impact failure and deformation models. This project is jointly funded by the NASA Glenn Research Center and the Federal Aviation Administration William J. Hughes Technical Center. Particular features of this set of data are that all material property and impact test data are obtained using traceable material, the test methods and procedures are extensively documented, and all the raw data are available. Four parallel efforts are currently underway: measurement of material deformation and failure response over a wide range of strain rates and temperatures, failure analysis of material property specimens and impact test articles, development of improved numerical modeling techniques for deformation and failure, and impact testing of flat panels and substructures for model validation. This report describes impact testing performed on 410 stainless steel sheet and plate samples of different thicknesses with two different types of projectiles, one a regular cylinder and one with a more complex geometry incorporating features representative of a jet engine fan blade. Data from this testing will be used in validating material models developed under this program. The material tests and the material models developed in this program will be published in separate reports.

410 Stainless Steel↗
NASA NTRS2020

Crash Sled Testing of Triaxially-Braided CFRP for Improved Vehicular Crashworthiness

The Impact Dynamics Laboratory at NASA Glenn Research Center recently developed a pneumatically-actuated crash sled for investigating the crush behavior of structural elements for vehicular applications. The apparatus includes an adjustable striker mass and specimen support mass, which are mounted on separate rails. This setup provides two advantages over crash sleds with so-called fixed specimen supports: (i) it allows for multiple independent measurements of the crush response using different instruments, and (ii) the specimen support can be varied and its reaction can be explicitly measured. This paper describes the experimental setup and data analysis methodology and illustrates the capability of the sled for measuring the specific energy absorption (SEA) of triaxially-braided carbon/epoxy composite C-channels and corrugated plates. The corrugated plate had a higher SEA than the C-channel and the SEAs did not vary when the striker mass and velocity were changed so that incident energy was constant.

Composite Material↗
NASA NTRS2020

Impact Testing of Inconel 718 for Material Impact Model Development

One of the difficulties with developing and verifying accurate impact models is that parameters such as high strain-rate material properties, failure modes, static properties, and impact test measurements are often obtained from a variety of different sources using different materials, with little control over consistency among the different sources. In addition, there is often a lack of quantitative measurements in impact tests to which the models can be compared. To alleviate some of these problems, a project is underway to develop a consistent set of material property, impact test data, and failure analysis for a variety of aircraft materials that can be used to develop improved impact failure and deformation models. This project is jointly funded by the NASA Glenn Research Center and the Federal Aviation Administration (FAA) William J. Hughes Technical Center. Unique features of this set of data are that all material property and impact test data are obtained using traceable material, the test methods and procedures are extensively documented, and all of the raw data is available. Four parallel efforts are currently underway. The Ohio State University conducts both measurement of material deformation and failure response over a wide range of strain rates and temperatures and failure analysis of material property specimens and impact test articles. The George Mason University conducts the development of improved numerical modeling techniques for deformation and failure. Glenn conducts the impact testing of flat panels and substructures. This report describes impact testing performed on Inconel 718 sheet and plate samples of different thicknesses with different types of projectiles, one a regular cylinder and one with a more complex geometry incorporating features representative of a jet engine fan blade. Data from this testing will be used in validating material models developed under this program. The material tests and the material models developed in this program will be published in separate reports.

J Michael Pereira↗
NASA NTRSDate not supplied

Crash Sled Testing of Triaxially-Braided CFRP for Improved Vehicular Crashworthiness

The Impact Dynamics Laboratory at NASA Glenn Research Center recently developed a pneumatically-actuated crash sled for investigating the crush behavior of structural elements for vehicular applications. The apparatus includes an adjustable striker mass and specimen support mass, which are mounted on separate rails. This setup provides two advantages over crash sleds with so-called fixed specimen supports: (i) it allows for multiple independent measurements of the crush response using different instruments, and (ii) the specimen support can be varied and its reaction can be explicitly measured. This paper describes the experimental setup and data analysis methodology and illustrates the capability of the sled for measuring the specific energy absorption (SEA) of triaxially-braided carbon/epoxy composite C-channels and corrugated plates. The corrugated plate had a higher SEA than the C-channel and the SEAs did not vary when the striker mass and velocity were changed so that incident energy was constant.

Charles R Ruggeri↗
NASA NTRSDate not supplied

Experimental Evaluation of Axial Crush Behavior of Woven Tubular Laminates with a Moving Support Condition

The objectives of the investigation were to measure the specific energy absorption (SEA) of the plain-weave carbon fiber reinforced polymer (CFRP) tubes, study the effect of tube length on SEA and stable crushing force, analyze the effect of using a crush trigger, and compare force-displacement data using different specimen support conditions. Dynamic crush testing of CFRP tubes was performed using the crash sled in the Impact Dynamics Laboratory at NASA Glenn Research Center.

Rudy T. Haluza↗