Engineering topics
Cheetham, Anthony K.
Publications and source records attributed to Cheetham, Anthony K..
Titanium Niobium Oxide: From Discovery to Application in Fast-Charging Lithium-Ion Batteries
Lithium-ion batteries are essential for portable technology and are now poised to disrupt a century of combustion-based transportation. The electrification revolution could eliminate our reliance on fossil fuels and enable a clean energy future; advanced batteries would facilitate this transition. However, owing to the demanding performance, cost, and safety requirements, it is challenging to translate new materials from laboratory prototypes to industrial-scale products. This Perspective describes that journey for a new lithium-ion battery anode material, TiNb 2 O 7 (TNO). TNO is intended as an alternative to graphite or Li 4 Ti 5 O 12 with better rate and safety characteristics than the former and higher energy density than the latter. The high capacity of TNO stems from the multielectron redox of Nb 5+ to Nb 3+ , its operating voltage window well above the Li + /Li reduction potential prevents lithium dendrite formation, and its open crystal structure leads to high-power performance. Nevertheless, the creation of a practical TNO anode was nonlinear and nontrivial. Its history is built on 30 years of fundamental science that preceded its application as a battery anode, and its battery development included a nearly 30-year gap. The insights and lessons contained in this Perspective, many of them acquired firsthand, serve two purposes: (i) to unite the disparate studies of TiNb 2 O 7 into a coherent modern understanding relevant to its application as a battery material and (ii) to highlight briefly some of the challenges faced when scaling up a new material that affect TiNb 2 O 7 as well as new electrode candidates more generally.
Translating a Material Discovery into a Commercial Product in the Modern Lithium-ion Battery Market
Lithium-ion batteries are essential for portable technology and are now poised to disrupt a century of combustion-based transportation. The electrification revolution could eliminate our reliance on fossil fuels and enable a clean energy future; advanced batteries would facilitate this transition. However, owing to the demanding performance, cost, and safety requirements, it is challenging to translate new materials from laboratory prototypes to commercial products. This Perspective describes that journey toward commercialization for a new lithium-ion battery anode material, TiNb2O7 (TNO). TNO is intended as an alternative to graphite or Li4Ti5O12 with better rate and safety characteristics than the former, and higher energy density than the latter. The high capacity of TNO stems from multielectron redox of Nb5+ to Nb3+, its operating voltage window well above Li+/Li reduction potential prevents lithium dendrite formation, and its open crystal structure leads to high-power performance. Nevertheless, the creation of a practical TNO anode was non-linear and non-trivial. Its history is built on 30 years on fundamental science that preceded its application as a battery, and its battery development included a nearly 30-year gap. The insights and lessons 2 contained in this Perspective, many of them acquired firsthand, serve two purposes: (i) to unite the disparate studies of TiNb2O7 into a coherent modern understanding relevant to its application as a battery material and (ii) to highlight some of the considerations of commercializing a new material that affect TiNb2O7 as well as new electrode candidates more generally.
Structural Diversity and Magnetic Properties of Hybrid Ruthenium Halide Perovskites and Related Compounds
Abstract There has been a great deal of recent interest in extended compounds containing Ru 3+ and Ru 4+ in light of their range of unusual physical properties. Many of these properties are displayed in compounds with the perovskite and related structures. Here we report an array of structurally diverse hybrid ruthenium halide perovskites and related compounds: MA 2 Ru X 6 ( X =Cl or Br), MA 2 M RuX 6 ( M =Na, K or Ag; X =Cl or Br) and MA 3 Ru 2 X 9 ( X =Br) based upon the use of methylammonium (MA=CH 3 NH 3 + ) on the perovskite A site. The compounds MA 2 Ru X 6 with Ru 4+ crystallize in the trigonal space group and can be described as vacancy‐ordered double‐perovskites. The ordered compounds MA 2 M Ru X 6 with M + and Ru 3+ crystallize in a structure related to BaNiO 3 with alternating MX 6 and Ru X 6 face‐shared octahedra forming linear chains in the trigonal space group. The compound MA 3 Ru 2 Br 9 crystallizes in the orthorhombic Cmcm space group and displays pairs of face‐sharing octahedra forming isolated Ru 2 Br 9 moieties with very short Ru–Ru contacts of 2.789 Å. The structural details, including the role of hydrogen bonding and dimensionality, as well as the optical and magnetic properties of these compounds are described. The magnetic behavior of all three classes of compounds is influenced by spin–orbit coupling and their temperature‐dependent behavior has been compared with the predictions of the appropriate Kotani models.
Structural Diversity and Magnetic Properties of Hybrid Ruthenium Halide Perovskites and Related Compounds
There has been a great deal of recent interest in extended compounds containing Ru 3+ and Ru 4+ in light of their range of unusual physical properties. Many of these properties are displayed in compounds with the perovskite and related structures. Here we report an array of structurally diverse hybrid ruthenium halide perovskites and related compounds: MA 2 RuX 6 (X=Cl or Br), MA 2 MRuX 6 (M=Na, K or Ag; X=Cl or Br) and MA 3 Ru 2 X 9 (X=Br) based upon the use of methylammonium (MA=CH 3 NH 3 + ) on the perovskite A site. The compounds MA 2 RuX 6 with Ru 4+ crystallize in the trigonal space group R3¯m and can be described as vacancy-ordered double-perovskites. The ordered compounds MA 2 MRuX 6 with M + and Ru 3+ crystallize in a structure related to BaNiO 3 with alternating MX 6 and RuX 6 face-shared octahedra forming linear chains in the trigonal P3¯m space group. The compound MA 3 Ru 2 Br 9 crystallizes in the orthorhombic Cmcm space group and displays pairs of face-sharing octahedra forming isolated Ru 2 Br 9 moieties with very short Ru–Ru contacts of 2.789 Å. The structural details, including the role of hydrogen bonding and dimensionality, as well as the optical and magnetic properties of these compounds are described. The magnetic behavior of all three classes of compounds is influenced by spin–orbit coupling and their temperature-dependent behavior has been compared with the predictions of the appropriate Kotani models.
Chemical and Structural Diversity of Hybrid Layered Double Perovskite Halides
Hybrid halide double perovskites are a class of compounds attracting growing interest due to their richness of structure and property. Two-dimensional (2D) derivatives of hybrid double perovskites are formed by the incorporation of organic spacer cations into three-dimensional (3D) double perovskites. Here, we report a series of seven new layered double perovskite halides with propylammonium (PA), octylammonium (OCA), and 1,4-butyldiammonium (BDA) cations. The general formulas of the compounds are A m M I M III X 8 (single-layered Ruddlesden–Popper type with m = 4 and A = PA or OCA, and single-layered Dion–Jacobson type with m = 2 and A = BDA, M I = Ag, M III = In or Bi, X = Cl or Br) and PA 2 Cs M I M III Br 7 (bilayered, with M I = Ag, M III = In or Bi). These families of compounds demonstrate significant versatility, with tunable layer thickness, the ability to vary the interlayer spacing, and the ability to selectively tune the band gap by varying the M I and M III cations along with the halide anions. The band gap of the single-layered materials varies from 2.41 eV for PA 4 AgBiBr 8 to 3.96 eV for PA 4 AgInCl 8 . Photoluminescent emission spectra of the layered double perovskites at low-temperature (100 K) are reported, and density functional theory electronic structure calculations are presented to understand the nature of the band gap evolution. The development of new structural and compositions in layered double perovskite halides enhances the understanding of structure–property relations in this important family.
Polymorphism in M(H 2 PO 2 ) 3 (M = V, Al, Ga) compounds with the perovskite-related ReO 3 structure
Trivalent metal hypophosphites with the general formula M(H 2 PO 2 ) 3 (M = V, Al, Ga) adopt the ReO 3 structure, with each compound displaying two structural polymorphs. High-pressure synchrotron X-ray studies reflect a pressure-driven phase transition in Ga(H 2 PO 2 ) 3 that can be considered on the basis of ab initio thermodynamics.
The capricious nature of iodine catenation in I 2 excess, perovskite-derived hybrid Pt( iv ) compounds
Here, perovskite-derived hybrid platinum iodides with the general formula A 2 Pt IV I 6 (A = formamidinium FA and guanidinium GUA) accommodate excess I 2 to yield hydrogen-bond-stabilized compounds where the I 2 forms catenates with I - anions on the PtI 6 octahedra.
Hydrogen Bonding Controls the Structural Evolution in Perovskite-Related Hybrid Platinum(IV) Iodides
In this paper, we describe the solid-state structural evolution in four hybrid hexaiodoplatinate(IV) compounds, demonstrating the increasingly important role that extended hydrogen bonding plays in directing the structure across the series. The compounds are A 2 PtI 6 , where A is one of the following amines: ammonium, NH 4 + ; methylammonium, CH 3 NH 3 + ; formamidinium, CH(NH 2 ) 2 + ; guanidinium, C(NH 2 ) 3 + . These are closely related in structure and properties to the hybrid halide perovskites of lead(II) that have recently established their prowess in optoelectronics. The first three of these compounds crystallize in the vacancy-ordered double perovskite A 2 Pt$\square$I 6 ($\square$ indicates a vacant site) structure in the K 2 PtCl 6 archetype, despite the relatively large perovskite tolerance factors involved. The last compound, (GUA) 2 PtI 6 , crystallizes in a vacancy-ordered variant of the hexagonal CsNiCl 3 structure: the K 2 MnF 6 structure. A combination of solid-state 195 Pt and 1 H NMR spectroscopy and detailed density functional theory calculations helps to reveal structural trends and establish the hydrogen-bonding tendencies. Finally, the calculations and measured optical properties support the surprising observation in these iodosalt compounds that, for smaller A cations, the conduction bands are considerably disperse, despite lacking extended I–Pt–I connectivity.
Janus Membranes: Creating Asymmetry for Energy Efficiency
Membranes are recognized as a key component in many environment and energy–related applications, but conventional membranes are challenged to satisfy the growing demand for ever more energy–efficient processes. Janus membranes, a novel class with asymmetric properties on each side, have recently emerged and represent enticing opportunities to address this challenge. With an inner driving force arising from their asymmetric configuration, Janus membranes are appealing for enhancing energy efficiency in a variety of membrane processes by promoting the desired transport. Furthermore, the fundamental principles to prepare Janus membranes with asymmetric surface wettability and charges are summarized, and how they work in conventional and unconventional membrane processes is demonstrated.
Mixed X-Site Formate-Hypophosphite Hybrid Perovskites
Following the recent discovery of a new family of hybrid ABX 3 perovskites where X=(H 2 POO) - (hypophosphite), this paper reports a facile synthesis for mixed X-site formate perovskites of composition [GUA]Mn(HCOO) 3-x (H 2 POO) x , with two crystallographically distinct, partially ordered intermediate phases with x =0.84 and 1.53, corresponding to ca. 30 and 50 mol % hypophosphite, respectively. These phases are characterised by single-crystal XRD and solid-state NMR spectroscopy, and their magnetic properties are reported.
Switchable electric polarization and ferroelectric domains in a metal-organic-framework
Multiferroics and magnetoelectrics with coexisting and coupled multiple ferroic orders are materials promising new technological advances. While most studies have focused on single-phase or heterostructures of inorganic materials, a new class of materials called metal–organic frameworks (MOFs) has been recently proposed as candidate materials demonstrating interesting new routes for multiferroism and magnetoelectric coupling. Herein, we report on the origin of multiferroicity of (CH 3 ) 2 NH 2 Mn(HCOO) 3 via direct observation of ferroelectric domains using second-harmonic generation techniques. For the first time, we observe how these domains are organized (sized in micrometer range), and how they are mutually affected by applied electric and magnetic fields. Lastly, calculations provide an estimate of the electric polarization and give insights into its microscopic origin.
Graphene-wrapped sulfur/metal organic framework-derived microporous carbon composite for lithium sulfur batteries
A three-dimensional hierarchical sandwich-type graphene sheet-sulfur/carbon (GS-S/C{sub ZIF8-D}) composite for use in a cathode for a lithium sulfur (Li-S) battery has been prepared by an ultrasonic method. The microporous carbon host was prepared by a one-step pyrolysis of Zeolitic Imidazolate Framework-8 (ZIF-8), a typical zinc-containing metal organic framework (MOF), which offers a tunable porous structure into which electro-active sulfur can be diffused. The thin graphene sheet, wrapped around the sulfur/zeolitic imidazolate framework-8 derived carbon (S/C{sub ZIF8-D}) composite, has excellent electrical conductivity and mechanical flexibility, thus facilitating rapid electron transport and accommodating the changes in volume of the sulfur electrode. Compared with the S/C{sub ZIF8-D} sample, Li-S batteries with the GS-S/C{sub ZIF8-D} composite cathode showed enhanced capacity, improved electrochemical stability, and relatively high columbic efficiency by taking advantage of the synergistic effects of the microporous carbon from ZIF-8 and a highly interconnected graphene network. Our results demonstrate that a porous MOF-derived scaffold with a wrapped graphene conductive network structure is a potentially efficient design for a battery electrode that can meet the challenge arising from low conductivity and volume change.
Ferroelasticity in a metal-organic framework perovskite; towards a new class of multiferroics
A metal–organic framework perovskite, [(CH 2 ) 3 NH 2 ][Mn(HCOO) 3 ], exhibits a weakly first order ferroelastic phase transition at ~272 K, from orthorhombic Pnma to monoclinic P2 1 /n, and a further transition associated with antiferromagnetic ordering at ~8.5 K. The main structural changes, through the phase transition, are orientational ordering of the azetidium groups and associated changes in hydrogen bonding. In marked contrast to conventional improper ferroelastic oxide perovskites, the driving mechanism is associated with the X-point of the cubic Brillouin zone rather than being driven by R- and M-point octahedral tilting. The total ferroelastic shear strain of up to ~5% is substantially greater than found for typical oxide perovskites, and highlights the potential of the flexible framework to undergo large relaxations in response to local structural changes. Measurements of elastic and anelastic properties by resonant ultrasound spectroscopy show some of the characteristic features of ferroelastic materials. In particular, acoustic dissipation below the transition point can be understood in terms of mobility of twin walls under the influence of external stress with relaxation times on the order of ~10 -7 s. Elastic softening as the transition is approached from above is interpreted in terms of coupling between acoustic modes and dynamic local ordering of the azetidium groups. Subsequent stiffening with further temperature reduction is interpreted in terms of classical strain–order parameter coupling at an improper ferroelastic transition which is close to being tricritical. By way of contrast, there are no overt changes in elastic or anelastic properties near 9 K, implying that any coupling of the antiferromagnetic order parameter with strain is weak or negligible.
Thermochemistry of zeolitic imidazolate frameworks (ZIF) with varying porosity
Explore the source record for details and available documents.