Search NASA⌕ Search

Engineering topics

Chelsea Solano

Publications and source records attributed to Chelsea Solano.

5 records
All sourcesNASA NTRSDOE OSTI
NASA NTRS2023

Effects of Layer Spacing for a Multilayered Facesheet Acoustic Liner

A single degree-of-freedom acoustic liner, a perforate facesheet over honeycomb core, is modified to have a facesheet comprised of three layers. The top and bottom perforate layers have the same dimensions with aligned perforations while the middle layer perforate can be longitudinally shifted up to 0.075 inches to change the effective porosity of the facesheet. These configurations range in porosity from 100% open down to 10% open in addition to two closed configurations (0% porosity). Gaps are introduced between the facesheet layers ranging from no gap to 0.016 inches. These configurations are tested in the NASA Langley Grazing Flow Impedance Tube to determine their acoustic impedance spectra. Introduction of a gap affects the acoustic impedance of the liner where the resonant frequency of the liners decreases with increased gap thickness for liners with an open area ratio above 25% but increases with gap thickness for liners with an open area ratio below 25%. Additionally, it is observed that increasing the gap height results in a reduction of the effect of porosity on acoustic impedance. The results show that the presence of such gaps can have a significant effect on liner impedance especially as porosity decreases.

acoustic liners↗
NASA NTRS2023

High Intensity Modal Impedance Tube Development at NASA Langley

A High Intensity Modal Impedance Tube (HIMIT) was developed for evaluation of acoustic liners in a normal incidence, high sound pressure level (SPL), and high frequency environment. Capabilities of the HIMIT are demonstrated here by testing three classes of acoustic liners: a narrow chamber liner, conventional single degree of freedom liners, and over-the-rotor liners. The experimental results are compared to results in NASA Langley's Normal Incidence Tube (NIT) for validation. The Zwikker and Kosten Transmission Line (ZKTL) model is also compared to the HIMIT results for selected configurations to study its applicability at high SPLs and frequencies. The HIMIT and NIT impedance spectra compare favorably up to 3.0 kHz, which is the upper frequency limit of the NIT analysis. The ZKTL model was used at frequencies up to 6.0 kHz and showed great comparison for the entire frequency range tested, indicating that the model may be used at high frequencies when the plane wave mode is dominant.

Chelsea Solano↗
NASA NTRSDate not supplied

Assessment of Acoustic Behavior for Perforate-Over-Large-Cell Liners

This study explores the effects of increasing the cell size for large-cell acoustic liners. Tests are conducted in the NASA Langley Grazing Flow Impedance Tube to evaluate liners with increasingly larger cell dimensions (up to 2” x 4” cross-section). Conventional impedance eduction confirms that liners with 2” x 3” cells (or larger) must be evaluated using nonlocally reacting assumptions. In addition, due to the sound propagation within cavities, the liners must be modeled using higher fidelity techniques. Thus, grazing flow duct and acoustic liner are modeled simultaneously using finite element methods. The facesheet is modeled using a transfer impedance, while the rest of the domain is modeled using the convected Helmholtz equation. The acoustic pressures predicted are shown to compare favorably with those measured in the Grazing Flow Impedance Tube.

large diameter↗
NASA NTRSDate not supplied

Extending Acoustic Liner Bandwidth with Simple Embedded Septa

An acoustic liner design incorporating single-hole perforate septa was evaluated by the NASA Langley Liner Physics Team. The design, termed the ‘Simplified Septa’ concept, incorporates embedded septa as found in traditional, multidegree-of-freedom liners. Generally, such septa are composed of multihole perforates or porous mesh, whereas this concept uses septa with one hole per cell. An optimization scheme was employed to determine septa placement and hole diameters based on a target impedance cost function. Versions of the concept are tested in the NASA Langley Normal Incidence Tube (NIT) to determine impedance and absorption spectra for swept tonal excitation at 120 and 140 dB. Experimental results are compared to predictions from a liner model based on the Zwikker-Kosten Transmission Line (ZKTL) code and show good agreement for no-flow conditions.

acoustics↗