Engineering topics
Publications and source records attributed to Chen, Bin.
We discover a promising group of quasi-one-dimensional (quasi-1D) superconducting materials among hexagonal perovskite chalcogenides with face-sharing connectivity at high pressure, which sheds light on superconductivity mechanisms.
Some of the obstacles to the commercialization of perovskite solar cells (PSCs) are their long-term moisture stability and material cost of the constituent layers, such as the commonly used spiro-OMeTAD hole transport layer (HTL). Replacing the spiro-OMeTAD with low-cost inorganic hole transport materials (HTMs) are important to further elevate the attractiveness of PSCs for commercialization. Perovskite-compatible, solution-exfoliated two-dimensional (2D) transition metal dichalcogenides (TMDCs) are being considered as viable candidates for inorganic HTMs. We consider one such TMDC, WSe 2 which was chemically exfoliated using dichlorobenzene (DCB), a perovskite-compatible solvent, as it was integrated with triple cation perovskite absorbers within the solar cell stack. Here, the WSe 2 HTL required heat treatment processes to be maintained below 100°C in order to preserve the integrity of the underlying perovskite; despite this lower temperature post treatment process, the structural morphology of the film revealed its dense and pinhole-free nature. Temperature-dependent transport studies conducted on the WSe 2 film provided evidence of its semiconducting character and its ability to extract holes well from the underlying triple-cation Cs 0.05 FA 0.79 MA 0.16 PbI 2.45 Br 0.55 absorber. The inorganic HTL offered better environmental stability in moisture-rich environments of up to 60% relative humidity, in comparison to spiro-OMeTAD HTL-based devices which degraded faster as a result of pinholes
Surface passivation has driven the rapid increase in the power conversion efficiency (PCE) of perovskite solar cells (PSCs). However, state-of-the-art surface passivation techniques rely on ammonium ligands that suffer deprotonation under light and thermal stress. We developed a library of amidinium ligands, of interest for their resonance effect–enhanced N–H bonds that may resist deprotonation, to increase the thermal stability of passivation layers on perovskite surfaces. This strategy resulted in a >10-fold reduction in the ligand deprotonation equilibrium constant and a twofold increase in the maintenance of photoluminescence quantum yield after aging at 85°C under illumination in air. Here, implementing this approach, we achieved a certified quasi–steady-state PCE of 26.3% for inverted PSCs; and we report retention of ≥90% PCE after 1100 hours of continuous 1-sun maximum power point operation at 85°C.
Abstract Accurate knowledge of the phase transitions and thermoelastic properties of candidate iron alloys, such as Fe‐Si alloys, is essential for understanding the nature and dynamics of planetary cores. The phase diagrams of some Fe‐Si alloys between 1 atm and 16 GPa have been back‐extrapolated from higher pressures, but the resulting phase diagram of Fe 83.6 Si 16.4 (9 wt.% Si) is inconsistent with temperature‐induced changes in its electrical resistivity between 6 and 8 GPa. This study reports in situ synchrotron X‐ray diffraction (XRD) measurements on pre‐melted and powder Fe 83.6 Si 16.4 samples from ambient conditions to 60 GPa and 900 K using an externally heated diamond‐anvil cell. Upon compression at 300 K, the bcc phase persisted up to ∼38 GPa. The hcp phase appeared near 8 GPa in the pre‐melted sample, and near 17 GPa in the powder sample. The appearance of the hcp phase in the pre‐melted sample reconciles the reported changes in electrical resistivity of a similar sample, thus resolving the low‐pressure region of the phase diagram. The resulting high‐temperature Birch‐Murnaghan equation of state (EoS) and thermal EoS based on the Mie‐Gruneisen‐Debye model of the bcc and hcp structures are consistent with, and complement the literature data at higher pressures. The calculated densities based on the thermal EoS of Fe‐9wt.%Si indicate that both bcc and hcp phases agree with the reported core density estimates for the Moon and Mercury.
Over 75% percent of ovarian cancer patients are diagnosed with advanced-stage disease characterized by unresectable intraperitoneal dissemination and the presence of ascites, or excessive fluid build-up within the abdomen. Conventional treatments include cytoreductive surgery followed by multi-line platinum and taxane chemotherapy regimens. Despite an initial response to treatment, over 75% of patients with advanced-stage ovarian cancer will relapse and succumb to platinum-resistant disease. Recent evidence suggests that fluid shear stress (FSS), which results from the movement of fluid such as ascites, induces epithelial-to-mesenchymal transition and confers resistance to carboplatin in ovarian cancer cells. This study demonstrates, for the first time, that FSS-induced platinum resistance correlates with increased cellular protoporphyrin IX (PpIX), the penultimate downstream product of heme biosynthesis, the production of which can be enhanced using the clinically approved pro-drug aminolevulinic acid (ALA). These data suggest that, with further investigation, PpIX could serve as a fluorescence-based biomarker of FSS-induced platinum resistance. Additionally, this study investigates the efficacy of PpIX-enabled photodynamic therapy (PDT) and the secretion of extracellular vesicles under static and FSS conditions in Caov-3 and NIH:OVCAR-3 cells, two representative cell lines for high-grade serous ovarian carcinoma (HGSOC), the most lethal form of the disease. FSS induces resistance to ALA-PpIX-mediated PDT, along with a significant increase in the number of EVs. Finally, the ability of PpIX-mediated photodynamic priming (PDP) to enhance carboplatin efficacy under FSS conditions is quantified. These preliminary findings in monolayer cultures necessitate additional studies to determine the feasibility of PpIX as a fluorescence-based indicator, and mediator of PDP, to target chemoresistance in the context of FSS.
Carbon and nitrogen are considered as candidate light elements present in planetary cores. However, there is limited understanding regarding the structure and physical properties of Fe-C-N alloys under extreme conditions. Here diamond anvil cell experiments were conducted, revealing the stability of hexagonal-structured Fe 7 (N 0.75 C 0.25 ) 3 up to 120 GPa and 2100 K, without undergoing any structural transformation or dissociation. Notably, the thermal expansion coefficient and Grüneisen parameter of the alloy exhibit a collapse at 55–70 GPa. First-principles calculations suggest that such anomaly is associated with the spin transition of iron within Fe 7 (N 0.75 C 0.25 ) 3 . Our modeling indicates that the presence of ∼1.0 wt% carbon and nitrogen in liquid iron contributes to 9–12% of the density deficit of the Earth's outer core. The thermoelastic anomaly of the Fe-C-N alloy across the spin transition is likely to affect the density and seismic velocity profiles of (C,N)-rich planetary cores, thereby influencing the dynamics of such cores.
Perovskite tandem solar cells show promising performance but non-radiative recombination and its progressive worsening with time, especially in the mixed Sn–Pb low-bandgap layer, limit performance and stability. Here, in this study, we find that mixed Sn–Pb perovskite thin films exhibit a compositional gradient, with an excess of Sn on the surface – and we show this gradient exacerbates oxidation and increases the recombination rate. We find that diamines preferentially chelate Sn atoms, removing them from the film surface and achieving a more balanced Sn:Pb stoichiometry, making the surface of the film resistive to the oxidation of Sn. The process forms an electrically resistive low-dimensional barrier layer, passivating defects and reducing interface recombination. Further improving the homogeneity of the barrier layer using 1,2-diaminopropane results in more uniform distribution and passivation. Tandems achieve a power conversion efficiency of 28.8%. As a result, encapsulated tandems retain 90% of initial efficiency following 1000 hours of operating at the maximum power point under simulated one-sun illumination in air without cooling.
Not provided.
Low-band-gap tin (Sn)-lead (Pb) perovskites are a critical component in all-perovskite tandem solar cells (APTSCs). Current state-of-the-art Sn-Pb perovskite devices exclusively use poly(3,4-ethylenedioxythiophene)-poly(styrenesulfonate) (PEDOT:PSS) as the hole-transport layer (HTL) but suffer from undesired buried-interface degradation. Here, we show that the deprotonation of the –SO 3 H group in PSS is the root cause of the interface degradation due to its low acid dissociation constant (pK a ), leading to acidic erosion and iodine volatilization in Sn-Pb perovskites. We identify that HTL featuring the carboxyl (–COOH) group with a higher pK a , such as poly[3-(4-carboxybutyl)thiophene-2,5-diyl] (P3CT), can suppress deprotonation and strengthen the interface, mitigating the buried-interface degradation. Motivated by established P3CT modification, we introduce Pb doping to P3CT to increase its work function and reduce interfacial energy loss. Furthermore, we fabricate APTSCs with a champion efficiency of 27.8% and an operational lifetime of over 1,000 h, with 97% retaining efficiency under maximum power point tracking.
The September 10 2017 X8 flare was one of the biggest of the current solar cycle, and it was also incredibly well observed. This presentation will review the available XRT data for this flare. XRT observed the initial flux rope eruption, which was also well observed by AIA and SUVI. XRT data is missing for some of the impulsive phase of the flare, but the late phase shows some very interesting features. There is some nice XRT imaging of a plasma sheet above cusp-shaped loops between 16:47 and 18:39 UT. After 18:40 UT, a double loop structure becomes apparent, with a more rounded loop nested within a larger, cusp-shaped structure. The flare loops continue to grow, and at around 1 UT on September 11, supra-arcade down flows and shrinking loops become visible. There is also interesting data in the late phase of this flare from RHESSI and the Expanded Owens Valley Solar Array (EOVSA).
The objective of this project is to develop a compact, high sensitivity Raman sensor for detection of life signatures in a flow cell configuration to enable bio-exploration and life detection during future mission to our Solar Systems Icy Worlds. The specific project objectives are the following: 1) Develop a Raman spectroscopy liquid analysis sensor for biosignatures; 2) Demonstrate applicability towards a future Enceladus or other Icy Worlds missions; 3) Establish key parameters for integration with the ARC Sample Processor for Life on Icy Worlds (SPLIce); 4) Position ARC for a successful response to upcoming Enceladus or other Icy World mission instrument opportunities.
Methods and devices for reducing CO.sub.2 to produce hydrocarbons are disclosed. A device comprises a photoanode capable of splitting H.sub.2O into electrons, protons, and oxygen; an electrochemical cell cathode comprising an electro-catalyst capable of reducing CO.sub.2; H.sub.2O in contact with the surface of the photoanode; CO.sub.2 in contact with the surface of the cathode; and a proton-conducting medium positioned between the photoanode and the cathode. Electrical charges associated with the protons and the electrons move from the photoanode to the cathode, driven in part by a chemical potential difference sufficient to drive the electrochemical reduction of CO.sub.2 at the cathode. A light beam is the sole source of energy used to drive chemical reactions. The photoanode can comprise TiO.sub.2 nanowires or nanotubes, and can also include WO.sub.3 nanowires or nanotubes, quantum dots of CdS or PbS, and Ag or Au nanostructures. The cathode can comprise a conductive gas diffusion layer with nanostructures of an electro-catalyst such as Cu or Co.
Methods for maximizing a fraction of light energy absorbed in each of three classes of light concentrators (rectangular parallelepipeds, paraboloids and prisms) by choice of incident angle of radiation and of one or more geometrical or physical parameters (absorber thickness, paraboloid dimensions, location of paraboloid focus, prism angles, concentrator material, cladding, prism angles, etc.). Alternatively, the light energy absorbed plus the light energy that escapes through non-total internal reflection within the light concentrator can be minimized.
A thin film device for harvesting energy from wind. The thin film device includes one or more layers of a compliant piezoelectric material formed from a composite of a polymer and an inorganic material, such as a ceramic. Electrodes are disposed on a first side and a second side of the piezoelectric material. The electrodes are formed from a compliant material, such as carbon nanotubes or graphene. The thin film device exhibits improved resistance to structural fatigue upon application of large strains and repeated cyclic loadings.
To dramatically reduce the cost and risk of CO2 management systems in future extended missions, we have conducted preliminary studies on the materials and device development for advanced "artificial photosynthesis" reaction systems termed the High Tortuosity PhotoElectroChemical (HTPEC) system. Our Phase I studies have demonstrated that HTPEC operates in much the same way a tree would function, namely directly contacting the cabin air with a photocatalyst in the presence of light and water (as humidity) to immediately conduct the process of CO2 reduction to O2 and useful, "tunable" carbon products. This eliminates many of the inefficiencies associated with current ISS CO2 management systems. We have laid the solid foundation for Phase II work to employ novel and efficient reactor geometries, lighting approaches, 3D manufacturing methods and in-house grown novel catalytic materials.The primary objective of the proposed work is to demonstrate the scientific and engineering foundation for light-activated, compact devices capable of converting CO2 to O2 and mission-relevant carbon compounds. The proposed HTPEC CO2 management system will demonstrate a novel pathway with high efficiency and reliability in a compact, lightweight reactor architecture. The proposed HTPEC air processing concept can be developed in multiple architectures, such as centralized processing as well as "artificial leaves" distributed throughout the cabin that utilize pre-existing cabin ventilation (wind). Additionally, HTPEC can be deployed with spectrally tunable collection channels for selectable product generation. HTPEC employs light as its only energy source to remove and convert waste CO2 using a non-toxic composite catalyst.We have demonstrated in the Phase I studies the production, tunability and robustness of the novel composite catalysts following the preliminary work in the Chen laboratory. Additionally, we have designed, fabricated and tested all components of HTPEC device with active materials, including flow modeling to optimize flow mixing and pressure drop as well as the production of ethylene and other larger hydrocarbons. To best determine how this technology could be implemented, we also performed system integration optimization and trade studies. This includes parameters such as mass, volume, power in relation to selected mission configurations, CO2 delivery methods and light source/delivery approaches.
A supercapacitor electrode mechanism comprising an electrically conductive, porous substrate, having one or more metallic oxides deposited on a first surface and a chemically reduced graphene oxide deposited on a second surface, to thereby provide an electrical double layer associated with the substrate. The substrate may be carbon paper or a similar substance. The layers of the supercapacitor are optionally rolled into an approximately cylindrical structure.
Chemical reduction of CO2 is a needed function for Life Support during long term space travel. Such processes can create useful products such as oxygen, hydrocarbon fuels, and polymer feedstocks.