Search NASA⌕ Search

Engineering topics

Chen, Bor-Rong

Publications and source records attributed to Chen, Bor-Rong.

24 records · Page 2

Zn 2 SbN 3</sub : growth and characterization of a metastable photoactive semiconductor

Ternary nitride semiconductors with wurtzite-derived crystal structure is an emerging class of materials for optoelectronic applications compatible with GaN and related III-V compounds. In particular, II-IV-V 2 materials such as ZnSnN 2 and ZnGeN 2 have been very actively studied for applications in photovoltaic and light emitting devices. However, many other possible wurtzite-derived ternary nitrides have not been reported, and hence their optical and electrical properties remain unknown. Here, we report on Zn 2 SbN 3 - the first Sb-based nitride and a photoactive semiconductor. Surprisingly, Zn 2 SbN 3 contains Sb in the highest (+5) oxidation state with unusual tetrahedral coordination. This new Zn 2 SbN 3 material has a solar-matched 1.6-1.7 eV band gap and shows near-band-edge room-temperature photoluminescence, demonstrating its promise as an optoelectronic semiconductor. Finally, Zn 2 SbN 3 can be synthesized at low temperature in a wide range of processing conditions, despite being metastable according to theoretical calculations. All these results, as well as the band position measurements, indicate that Zn 2 SbN 3 is a promising emerging semiconductor for applications as an absorber in photovoltaic and photoelectrochemical solar cells.

36 MATERIALS SCIENCE↗

Understanding crystallization pathways leading to manganese oxide polymorph formation

Abstract Hydrothermal synthesis is challenging in metal oxide systems with diverse polymorphism, as reaction products are often sensitive to subtle variations in synthesis parameters. This sensitivity is rooted in the non-equilibrium nature of low-temperature crystallization, where competition between different metastable phases can lead to complex multistage crystallization pathways. Here, we propose an ab initio framework to predict how particle size and solution composition influence polymorph stability during nucleation and growth. We validate this framework using in situ X-ray scattering, by monitoring how the hydrothermal synthesis of MnO 2 proceeds through different crystallization pathways under varying solution potassium ion concentrations ([K + ] = 0, 0.2, and 0.33 M). We find that our computed size-dependent phase diagrams qualitatively capture which metastable polymorphs appear, the order of their appearance, and their relative lifetimes. Our combined computational and experimental approach offers a rational and systematic paradigm for the aqueous synthesis of target metal oxides.

36 MATERIALS SCIENCE↗

Morphology and CO Oxidation Activity of Pd Nanoparticles on SrTiO 3 Nanopolyhedra

Single crystal SrTiO 3 nanocuboids having primarily TiO 2 -(001) surfaces and nanododecahedra having primarily (110) surfaces were created by two separate hydrothermal synthesis processes. Pd nanoparticles grown on the two sets of STO nanopolyhedra by atomic layer deposition show different morphologies and CO oxidation performance. Transmission electron microscopy and small-angle X-ray scattering show that 2-3 nm Pd nanoparticles with 3-5 nm interparticle distances decorate the STO surfaces. When the number of ALD cycles increases, the growth of the Pd nanoparticles is more significant in size on TiO 2 -(001)-STO surfaces, while that on (110)-STO surfaces is more predominant in number. High resolution electron microscopy images show that single crystal and multiply twinned Pd nanoparticles coexist on both types of the STO nanopolyhedra and exhibit different degrees of adhesion. The CO oxidation reaction, which was employed to determine the dependence of catalytic activity, demonstrated that the Pd catalytic performance was dominated by the coverage of CO, which is more directly related to Pd nanoparticle size than to shape. CO turnover frequency analysis and diffuse reflectance infrared Fourier transform spectroscopy show that regardless of the shape or degrees of wetting, larger Pd nanoparticles (~ 3 nm) have lower catalytic activity due to high CO coverage on nanoparticle facets. Smaller nanoparticles (~ 2 nm) have more edge and corner sites and present 2-3 times higher TOF at 80 and 100 degrees C.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Synthesis of Supported Pd 0 Nanoparticles from a Single-Site Pd 2+ Surface Complex by Alkene Reduction

Here, a surface metal–organic complex, (-AlO x )Pd(acac) (acac = acetylacetonate), is prepared by chemically grafting the precursor Pd(acac) 2 onto γ-Al 2 O 3 in toluene at 25 °C. The resulting surface complex is characterized by inductively coupled plasma atomic emission spectroscopy (ICP-AES), X-ray photoelectron spectroscopy (XPS), X-ray absorption spectroscopy (XAS), and dynamic nuclear polarization surface-enhanced solid-state nuclear magnetic resonance spectroscopy (DNP SENS). This surface complex is a precursor in the direct synthesis of size-controlled Pd nanoparticles under mild reductive conditions and in the absence of additional stabilizers or pretreatments. Indeed, upon exposure to gaseous ethylene or liquid 1-octene at 25 °C, the Pd 2+ species is reduced to form Pd 0 nanoparticles with a mean diameter of 4.3 ± 0.6 nm, as determined by scanning transmission electron microscopy (STEM). These nanoparticles are catalytically relevant using the aerobic 1-phenylethanol oxidation as a probe reaction, with rates comparable to a conventional Pd/Al 2 O 3 catalyst but without an induction period. Diffuse reflectance infrared Fourier transform spectroscopy (DRIFTS) and temperature-programmed reaction mass spectrometry (TPR-MS) reveal that the surface complex reduction with ethylene coproduces H 2 , acetylene, and 1,3-butadiene. This process reasonably proceeds via an olefin activation/coordination/insertion pathway, followed by β-hydride elimination to generate free Pd 0 . Lastly, the well-defined nature of the single-site supported Pd 2+ precursor provides direct mechanistic insights into this unusual and likely general reductive process.

36 MATERIALS SCIENCE↗

All Roads Lead to TiO 2 : TiO 2 -Rich Surfaces of Barium and Strontium Titanate Prepared by Hydrothermal Synthesis

Through high-resolution electron microscopy, the surface structure of barium titanate and strontium titanate nanoparticles are found to be terminated by a TiO 2 double layer. These results confirm prior observations of TiO 2 -rich surface reconstructions on strontium titanate nanoparticles made hydrothermally at high pH and single crystals prepared with wet chemical etching. Of all the reconstructions observed on single crystals for these two materials, we report for first time the √13 × √13R33.7° structure on the {001} facets of hydrothermally prepared barium titanate and strontium titanate nanocrystals. The aqueous environment common to the two preparation methods preferentially leaves strontium and barium depleted from the A-sites near the surface and leads to TiO 2 -terminated surfaces for both materials. Analysis indicates that the observed structures are the thermodynamic lowest energy structures in aqueous conditions.

36 MATERIALS SCIENCE↗