Search NASA⌕ Search

Engineering topics

Chen, Changfeng

Publications and source records attributed to Chen, Changfeng.

At least 55 records · Page 3

Intrinsic low thermal conductivity in weakly ionic rocksalt structures

A fundamental challenge in thermoelectric (TE) material research is meeting the simultaneous requirements of high carrier mobility and low thermal conductivity. Simple crystal structures are ideal for maintaining high carrier mobility, but they usually have high thermal conductivity. In this paper, we show by first-principles lattice dynamics and Boltzmann transport calculations that weakly ionic rocksalt structures exhibit strong lattice anharmonicity and low acoustic-phonon group velocity, which combine to produce intrinsic low thermal conductivity. Finally, we unveil microscopic mechanisms that explain experimental observations and provide insights for TE material design and discovery.

36 MATERIALS SCIENCE↗

Phosphorene: Fabrication, properties, and applications

Phosphorene, the single- or few-layer form of black phosphorus, was recently rediscovered as a two-dimensional layered material holding great promise for applications in electronics and optoelectronics. Research into its fundamental properties and device applications has since seen exponential growth. In this Perspective, we review recent progress in phosphorene research, touching upon topics on fabrication, properties, and applications; we also discuss challenges and future research directions. We highlight the intrinsically anisotropic electronic, transport, optoelectronic, thermoelectric, and mechanical properties of phosphorene resulting from its puckered structure in contrast to those of graphene and transition-metal dichalcogenides. The facile fabrication and novel properties of phosphorene have inspired design and demonstration of new nanodevices; however, further progress hinges on resolutions to technical obstructions like surface degradation effects and nonscalable fabrication techniques. We also briefly describe the latest developments of more sophisticated design concepts and implementation schemes that address some of the challenges in phosphorene research. As a result, it is expected that this fascinating material will continue to offer tremendous opportunities for research and development for the foreseeable future.

36 MATERIALS SCIENCE↗

Computational prediction of body-centered cubic carbon in an all- s p 3 six-member ring configuration

Recent shock compression experiments produced clear evidence of a new carbon phase, but a full structural identification has remained elusive. Here we establish by ab initio calculations a body-centered cubic carbon phase in Ia3¯d(O 10 h ) symmetry, which contains twelve atoms in its primitive cell, thus termed BC12, and comprises all-sp 3 six-membered rings. This structural configuration places BC12 carbon in the same bonding type as cubic diamond, and its stability is verified by phonon mode analysis. Simulated x-ray diffraction patterns provide an excellent match to the previously unexplained distinct diffraction peak found in shock compression experiments. Electronic band and density of states calculations reveal that BC12 is a semiconductor with a direct band gap of ~2.97eV. Lastly, these results provide a solid foundation for further exploration of this new carbon allotrope.

36 MATERIALS SCIENCE↗

Anisotropic ripple deformation in phosphorene

Here, two-dimensional materials tend to become crumpled according to the Mermin-Wagner theorem, and the resulting ripple deformation may significantly influence electronic properties as observed in graphene and MoS 2 . Here, we unveil by first-principles calculations a new, highly anisotropic ripple pattern in phosphorene, a monolayer black phosphorus, where compression-induced ripple deformation occurs only along the zigzag direction in the strain range up to 10%, but not the armchair direction. This direction-selective ripple deformation mode in phosphorene stems from its puckered structure with coupled hinge-like bonding configurations and the resulting anisotropic Poisson ratio. We also construct an analytical model using classical elasticity theory for ripple deformation in phosphorene under arbitrary strain. The present results offer new insights into the mechanisms governing the structural and electronic properties of phosphorene crucial to its device applications.

36 MATERIALS SCIENCE↗

A New Molybdenum Nitride Catalyst with Rhombohedral MoS 2 Structure for Hydrogenation Applications

Nitrogen-rich transition-metal nitrides hold great promise to be the next-generation catalysts for clean and renewable energy applications. However, incorporation of nitrogen into the crystalline lattices of transition metals is thermodynamically unfavorable at atmospheric pressure; most of the known transition metal nitrides are nitrogen-deficient with molar ratios of N:metal less than a unity. In this work, we have formulated a high-pressure route for the synthesis of a nitrogen-rich molybdenum nitride through a solid-state ion-exchange reaction. The newly discovered nitride, 3R-MoN 2 , adopts a rhombohedral R3m structure, isotypic with MoS 2 . Further, this new nitride exhibits catalytic activities that are three times more active than the traditional catalyst MoS 2 for the hydrodesulfurization of dibenzothiophene and more than twice as high in the selectivity to hydrogenation. The nitride is also catalytically active in sour methanation of syngas with >80% CO and H 2 conversion at 723 K. Lastly, our formulated route for the synthesis of 3R-MoN 2 is at a moderate pressure of 3.5 GPa and, thus, is feasible for industrial-scale catalyst production.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Proximity enhanced quantum spin Hall state in graphene

Graphene is the first model system of two-dimensional topological insulator (TI), also known as quantum spin Hall (QSH) insulator. The QSH effect in graphene, however, has eluded direct experimental detection because of its extremely small energy gap due to the weak spin–orbit coupling. Here we predict by ab initio calculations a giant (three orders of magnitude) proximity induced enhancement of the TI energy gap in the graphene layer that is sandwiched between thin slabs of Sb 2 Te 3 (or MoTe 2 ). This gap (1.5 meV) is accessible by existing experimental techniques, and it can be further enhanced by tuning the interlayer distance via compression. We reveal by a tight-binding study that the QSH state in graphene is driven by the Kane–Mele interaction in competition with Kekulé deformation and symmetry breaking. As a result, the present work identifies a new family of graphene-based TIs with an observable and controllable bulk energy gap in the graphene layer, thus opening a new avenue for direct verification and exploration of the long-sought QSH effect in graphene.

36 MATERIALS SCIENCE↗

Superior magnetic and mechanical property of MnFe 3 N driven by electron correlation and lattice anharmonicity

Manganese-substitution-doped iron nitride MnFe 3 N holds great promise for applications in high-density magnetic recording and spintronic devices. However, existing theory contradicts experimental results on the structural and magnetic stability of MnFe 3 N, and the underlying mechanisms remain elusive. Here we demonstrate by first-principles calculations that the ferromagnetic state with enhanced magnetization in MnFe 3 N is driven by the electron correlation effect not previously considered. We further reveal a large nonlinear shear plasticity, which produces an unexpectedly high shear strength in MnFe 3 N despite its initial ductile nature near the equilibrium structure. Moreover, we identify strong lattice anharmonicity that plays a pivotal role in stabilizing MnFe 3 N under high pressures at room temperature. These remarkable properties stem from the intriguing bonding nature of the parent compound Fe 4 N. Lastly, our results explain experimental results and offer insights into the fundamental mechanisms for the superior magnetic and mechanical properties of MnFe 3 N.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗

Superhard BC 3 in cubic diamond structure

We solve the crystal structure of recently synthesized cubic BC 3 using an unbiased swarm structure search, which identifies a highly symmetric BC 3 phase in the cubic diamond structure (d–BC3) that contains a distinct B-B bonding network along the body diagonals of a large 64-atom unit cell. Simulated x-ray diffraction and Raman peaks of d–BC 3 are in excellent agreement with experimental data. Calculated stress-strain relations of d–BC 3 demonstrate its intrinsic superhard nature and reveal intriguing sequential bond-breaking modes that produce superior ductility and extended elasticity, which are unique among superhard solids. Here, the present results establish the first boron carbide in the cubic diamond structure with remarkable properties, and these new findings also provide insights for exploring other covalent solids with complex bonding configurations.

36 MATERIALS SCIENCE↗

Unexpected structural softening of interstitial boron solid solution WB{sub 3+x}

Using first-principles calculations, we reveal an unexpected structural softening in a recently proposed WB{sub 3+x} structural model that tries to explain the X-ray diffraction, high resolution TEM, pressure dependence of the normalized lattice c/a ratio, and hardness experimental results of the synthesized tungsten boride compounds with a nominal composition WB{sub 4}. We show that the interstitial boron in WB{sub 3+x}, which was proposed to strengthen the covalent bonding network, unexpectedly weakens the atomic bonding, resulting in a large reduction of its indentation strength to well below that of WB{sub 3}. This is in direct contradiction to the experimental results showing that synthesized WB{sub 4} is harder than WB{sub 3}. The unusual structural softening is attributed to the unique three-center covalent bonding formed by the interstitial boron atoms that can easily deform under indentation. Our results show that the proposed interstitial boron solid solution WB{sub 3+x} structure is incompatible with experimental results, which calls for further investigations to determine the crystal structure of the synthesized WB{sub 4}.

36 MATERIALS SCIENCE↗

A New Carbon Allotrope with Six-Fold Helical Chains in all-sp2 Bonding Networks

Using a recently developed approach to constructing covalent network structures from linear carbyne, we identify by ab initio calculations a new carbon allotrope in R3m (D5 3d) symmetry that comprises six-fold helical chains with alternating sp2 -type single and double bonds along the chains that are connected via zigzag benzene rings. This 6-fold carbene is characterized as a three-dimensional three-connected chiral crystalline modification of graphite. Phonon and electronic band calculations indicate that this new structure is dynamically stable and is a semiconductor with a band gap of 0.47 eV, in contrast to the semimetallic nature of graphite. Simulated x-ray diffraction patterns of the 6-fold carbene provide an excellent match to the previously unexplained distinct diffraction peak of a new carbon allotrope found in recent detonation experiments. These results establish a new carbon phase and offer insights into its outstanding structural and electronic properties.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗

New Carbon Allotropes with Helical Chains of Complementary Chirality Connected by Ethene-type π-Conjugation

We here identify by ab initio calculations two distinct three-dimensional three-connected (3D3C) chiral framework structures of carbon in R3m and I41/amd symmetry, respectively, which comprise 3-fold and 4-fold helical chains with complementary chirality. The helical carbon chains are connected by an ethene-type planar p-conjugation, and the resulting structures contain a network of sp2 carbon bonds with one-third being double bonds between the chains and two-thirds single bonds along the chains. Phonon and electronic band structure calculations show that these chiral carbene structures are dynamically stable and exhibit a large band gap (2.4 , 2.9 eV). This semiconducting nature reflects a key distinction from previously proposed metallic isomers of helical or zigzag carbon chains with twisted p states that are dynamically unstable. The present results solve the long-sought 3D3C all-sp2 carbon structures and may help design other covalent bonding networks.

ATOMISTIC MODELS↗