Search NASA⌕ Search

Engineering topics

Chen, E.

Publications and source records attributed to Chen, E..

At least 19 records

Emittance Measurements with Wire Scanners in the Fermilab Side-coupled Linac

The Fermilab Side-Coupled Linac accelerates H-beam from 116 MeV to 400 MeV through seven 805 MHz modules. Twelve wire scanners are present in the Side Coupled Linac and four are present in the transfer line between the Linac and the Booster synchrotron ring. These wire scanners act as important diagnostic instruments to directly collect information on the beam's transverse distribution. The manipulation of the conditions of wire scanner data collection enables further characterization of the beamline, such as calculating emittance and the Twiss parameters of the beam at select regions, which we present here.

43 PARTICLE ACCELERATORS↗

Switching limits of top-gated carbon nanotube field-effect transistors

The performance limits of carbon nanotube field-effect transistors (CNFETs) based on a recently reported process are studied by computational techniques at temperatures between 300 K and 4 K. Here, the impact of band-to-band tunneling (BTBT) and source-to-drain tunneling (SDT) is examined for devices with varying gate length through the use of simulations based on the non-equilibrium Green’s function (NEGF) formalism, and calibrated to measurements. Additionally, the case of junctionless chemical doping profiles is analyzed in contrast to electrostatic doping recently reported for test structures. The switching limits of CNFETs are further explored for devices based on carbon nanotubes (CNTs) with more favorable electronic structures.

77 NANOSCIENCE AND NANOTECHNOLOGY↗

Performance of 8 × 8 × 32 and 10 × 10 × 32 mm 3 CdZnTe position-sensitive virtual Frisch-grid detectors for high-energy gamma ray cameras

CdZnTe (CZT) crystals with thicknesses up to 20 mm and diameters up to 75 mm have become available from Redlen Technologies, Inc. for making large-volume gamma-ray detectors. The modified growth and optimized annealing conditions allowed Redlen to minimize the dark current and improve the uniformity of CZT crystals. Two detector designs, pixelated (H3D) and position-sensitive virtual Frisch-grid (VFG), have greatly benefitted from the availability of such big crystals. Encouraging results from testing of 40×40×15 mm 3 pixelated detectors were recently reported by the University of Michigan. In this work, we evaluated the spectroscopic properties of 8×8×32 and 10×10×32 mm 3 crystals configured as position-sensitive VFG detectors. Both digitized waveforms and an analog ASIC were used to read and process the signals from the detectors and test their spectral- and spatial-resolution. The VFG design provides the flexibility to scale-up the dimensions of the detectors for the desired efficiency, while the position information allows for correcting the detectors' response non-uniformity caused by crystal defects and devices geometry, thereby reducing the instrument cost and making them more feasible for emerging applications in gamma-ray astronomy, nonproliferation, portal screening and nuclear safeguards, where large detector arrays are often required.

46 INSTRUMENTATION RELATED TO NUCLEAR SCIENCE AND ↗

Use of the drift-time method to measure the electron lifetime in long-drift-length CdZnTe detectors

The traditional method for electron lifetime measurements of CdZnTe (CZT) detectors relies on using the Hecht equation. The procedure involves measuring the dependence of the detector response on the applied bias to evaluate the μτ product, which in turn can be converted into the carrier lifetime. Despite general acceptance of this technique, which is very convenient for comparative testing of different CZT materials, the assumption of a constant electric field inside a detector is unjustified. In the Hecht equation, this assumption means that the drift time would be a linear function of the distance. This condition is not fulfilled in practice at low applied biases, where the Hecht equation is most sensitive to the μτ product. As a result, researchers usually take measurements at relatively high biases, which work well in the case of the low μτ-product material, <10 -3 cm 2 /V, but give significantly underestimated values for the case of high μτ-product crystals. In this paper, we applied the drift-time method to measure the electron lifetimes in long-drift-length (4 cm) standard-grade CZT detectors produced by the Redlen Technologies. We found that the electron μτ product of tested crystals is in the range 0.1–0.2 cm 2 /V, which is an order of the magnitude higher than any value previously reported for a CZT material. Finally, in comparison, using the Hecht equation fitting, we obtained μτ = 2.3 × 10 -2 cm 2 /V for a 2-mm thin planar detector fabricated from the same CZT material.

47 OTHER INSTRUMENTATION↗

Comparison of HCMM and GOES satellite temperatures and evaluation of surface statistics

Infrared data from GOES and HCMM satellites for areas in northern central and southern Florida were compared for February 1, 1979 to examine spatial variations of surface temperatures within GOES pixels using nested HCMM pixel surface temperatures. Standard deviations of HCMM pixel temperatures associated with mean temperature of a GOES pixel temperature during this period were found to be smallest for homogeneous water surfaces (about 0.5 K), to be slightly larger for homogeneous land surfaces (about 0.1 K), and to range up as high as 3.5 K for mixed water-land surfaces.

Chen, E.↗

Frost Forecasting for Fruitgrowers

Progress in forecasting from satellite data reviewed. University study found data from satellites displayed in color and used to predict frost are valuable aid to agriculture. Study evaluated scheme to use Earth-temperature data from Geostationary Operational Environmental Satellite in computer model that determines when and where freezing temperatures endanger developing fruit crops, such as apples, peaches and cherries in spring and citrus crops in winter.

Martsolf, J. D.↗

Comparison of winter-nocturnal geostationary satellite infrared-surface temperature with shelter-height temperature in Florida

Geostationary satellite surface temperatures derived from a Visible and Infrared Spin Scan Radiometer (VISSR) sensor (10.5 to 12.6 microns) were compared with 1.5-m air temperatures collected by a thermocouple on a traversing vehicle along rural highway transects in Florida, and with two fixed thermographs located in rural and agricultural areas. Statistical comparisons between satellite and 1.5-m observations yielded a mean correlation coefficient of 0.87 and an average sample standard deviation from regression of 1.57 C during clear nights for four winters (1978-1981). The satellite-temperature image of Lake Okeechobee was compared with its geographic outline for areal image registration. Manual overlays of temporal images were repeatable to within one pixel. Satellite-sensed water temperature of Lake Okeechobee was used as an indicator of satellite radiometer repeatability and stability.

Chen, E.↗

Use of thermal inertia determined by HCMM to predict nocturnal cold prone areas in Florida

Registered data sets were used to develop qualititative temperature and delta T maps of a band across north Florida and across south Florida for use with Carlson's boundary layer energy model balance model. Thermal inertia and moisture availability computations for north Florida are being used to investigate model sensitivity and to evaluate input parameters. Temperature differences of day-night HCMM overpasses clearly differentiate wetlands and uplands areas.

Allen, L. H., Jr.↗

Delineation of cold-prone areas using nighttime SMS/GOES thermal data Effects of soils and water

Infrared digital data from geostationary satellites were used to demonstrate the usefulness of remotely sensed surface temperature data to delineate microscale and mesoscale climates. Nocturnal winter data (December-February) from 1976-77 to 1978-79 over Florida revealed noticeable contrasts in surface temperature patterns. Colder areas were associated with low soil moisture content in the upper layers of excessively drained and well drained sandy soils, whereas warmer areas were associated with bodies of water, wetlands, or poorly drained soils. An unexpected surface temperature pattern for one night where the north-central Florida climatic zone was colder than the north Florida climatic zone was found to be caused by differences in antecedent frontal rainfall. Differences in surface radiant energy fluxes over these two areas at 0200 EST 20 December 1977, based on average satellite-sensed surface temperatures, were compared with differences in soil heat fluxes that were computed from 1.5 m climatological temperatures and soil thermal properties by use of a simplified surface energy balance equation.

Chen, E.↗

Use of thermal inertia determined by HCMM to predict nocturnal cold prone areas in Florida

Surface temperatures derived from HCMM data were compared with to those obtained by GOES satellite and the apparent thermal inertia (ATI) calculated. For two dates, the HCMM temperatures appear to be about 5 C lower than the GOES temperatures. The ATI for excessively-drained to well-drained mineral soils was greater than for drained organic soils possibly because of long periods of low rainfall during late 1980 and early 1981. Organic soils cropped to sugar cane showed lower ATI after a severe killing freeze. With dead leaves, there was less transpiration and more solar radiation probably reached the dark soil surface. This would explain the larger diurnal temperature amplitude observed.

Allen, L. H., Jr.↗

Application of Satellite Frost Forecast Technology to Other Parts of the United States

Thermal infrared data taken from the GOES satellite over a period of several hours was color enhanced by computer according to temperature. The varying temperatures were then used to assist in frost forecasting. Input from Michigan and Pennsylvania to the cold climate mapping project is emphasized in the report of the second year's activities of a two year effort.

Martsolf, J. D.↗

Use of thermal inertia determined by HCMM to predict nocturnal cold prone areas in Florida

Transparencies, prints, and computer compatible tapes of temperature differential and thermal inertia for the winter of 1978 to 1979 were obtained. Thermal inertial differences in the South Florida depicted include: drained organic soils of the Everglades agricultural area, undrained organic soils of the managed water conservation areas of the South Florida water management district, the urbanized area around Miami, Lake Okeechobee, and the mineral soil west of the Everglades agricultural area. The range of wetlands and uplands conditions within the Suwanee River basin was also identified. It is shown that the combination of wetlands uplands surface features of Florida yield a wide range of surface temperatures related to wetness of the surface features.

Allen, L. H., Jr.↗

Use of thermal inertia determined by HCMM to predict nocturnal cold prone areas in Florida

The HCMM transparency scenes for the available winter of 1978-1979 were evaluated; scenes were identified on processed magnetic tapes; other remote sensing information was identified; and a soil heat flux model with variable-depth thermal profile was developed. The Image 100 system was used to compare HCMM and GOES transparent images of surface thermal patterns. Excellent correspondence of patterns was found, with HCMM giving the greater resolution. One image shows details of thermal patterns in Florida that are attributable to difference in near surface water contents. The wide range of surface temperatures attributable to surface thermal inertia that exist in the relatively flat Florida topography is demonstrated.

Allen, L. H., Jr.↗

Satellite-sensed winter nocturnal temperature patterns of the Everglades Agricultural Area

Surface temperature patterns of drained organic soil farmland in the Everglades Agricultural Area south of Lake Okeechobee, Florida, were studied using GOES-1 satellite infrared digital data for the winters of 1976-77 and 1977-78. Local thermal features were explained in terms of soil types, soil depths and climate modification caused by organic soil drainage. A cold-prone area was delineated in the Everglades Agricultural Area with satellite data. The winter nighttime surface temperatures of this area were more characteristic of north central Florida, approximately 370 km further north, than of surrounding areas of mineral soil or undrained organic soil.

Chen, E.↗

Simulating the moderating effect of a lake on downwind temperatures

A steady-state, two-dimensional numerical model is used to simulate air temperatures and humidity downwind of a lake at night. Thermal effects of the lake were modelled for the case of moderate and low surface winds under the cold-air advective conditions that occur following the passage of a cold front. Surface temperatures were found to be in good agreement with observations. A comparison of model results with thermal imagery indicated the model successfully predicts the downwind distance for which thermal effects due to the lake are significant.

Bill, R. G., Jr.↗