Search NASA⌕ Search

Engineering topics

Chen, Hongzheng

Publications and source records attributed to Chen, Hongzheng.

On the role of asymmetric molecular geometry in high-performance organic solar cells

Although asymmetric molecular design has been widely demonstrated effective for organic photovoltaics (OPVs), the correlation between asymmetric molecular geometry and their optoelectronic properties is still unclear. To access this issue, we have designed and synthesized several symmetric-asymmetric non-fullerene acceptors (NFAs) pairs with identical physical and optoelectronic properties. Interestingly, we found that the asymmetric NFAs universally exhibited increased open-circuit voltage compared to their symmetric counterparts, due to the reduced non-radiative charge recombination. From our molecular-dynamic simulations, the asymmetric NFA naturally exhibits more diverse molecular interaction patterns at the donor (D):acceptor (A) interface as compared to the symmetric ones, as well as higher D:A interfacial charge-transfer state energy. Moreover, it is observed that the asymmetric structure can effectively suppress triplet state formation. These advantages enable a best efficiency of 18.80%, which is one of the champion results among binary OPVs. Therefore, this work unambiguously demonstrates the unique advantage of asymmetric molecular geometry, unveils the underlying mechanism, and highlights the manipulation of D:A interface as an important consideration for future molecular design.

14 SOLAR ENERGY↗

Progressive evolutions of non-fused ring electron acceptors toward efficient organic solar cells with improved photocurrent and reduced energy loss

Resolving competitive counterbalance between high external quantum efficiency (EQE) response and low energy loss is critical for achieving efficient organic solar cells (OSCs), including those based on low-cost non-fused-ring electron acceptor (NFREA). In this work, we performed a comparable study by utilizing four NFREAs with progressive evolutions in molecular structures, energetic levels, spectral coverages, crystallinity, etc, to pair with polymer donor J52. By regulating the terminal and side chains of NFREAs, the enhanced intramolecular charge transfer (ICT) effect allows O-PC-EH possessing the broader spectral coverage for higher photocurrent, the reduced energetic offset enables O-PC-EH-based device owning higher luminescence property for lower energy loss, the strengthened crystallinity endows O-PC-EH-based blend better charge transport property for less charge recombination. With those comprehensive managements from molecule to blend properties, the J52:O-PC-EH-based OSCs achieved the best efficiency of 14.4% (certified: 14.1%) with benefits in all the three device parameters. Here, this work reveals the importance of fine-tuning molecular structures of NFREAs according to paired polymer donor for maximizing the device performances.

14 SOLAR ENERGY↗

Simultaneous Improvements in Efficiency and Stability of Organic Solar Cells via a Symmetric‐Asymmetric Dual‐Acceptor Strategy

Abstract Simultaneously achieving improvements in power conversion efficiency (PCE) and stability is the main task of the current development stage of organic solar cells (OSCs). This work reports a symmetry–asymmetry dual‐acceptor (SADA) strategy to construct ternary devices, which is found to be feasible for increasing both the PCE and the operational lifetime of OSCs. In this contribution, the symmetric acceptor L8‐BO and the asymmetric acceptor BTP‐S9 are blended in equal proportions with polymer donor PM6 for the consideration of absorption spectrum complementarity and cascade energetic alignment. In addition, the features of crystallinity and miscibility of the dual‐acceptor deliver optimized morphology lead to a high PCE of 18.84%. In addition, the asymmetric acceptor BTP‐S9 with a larger dipole moment shows tighter molecular stacking and longer crystal correlation length, which favor intrinsic molecular photostability, and further consolidate the operational lifetime of OSCs when coordinated with L8‐BO. This work demonstrates the efficacy of the SADA strategy for constructing efficient and stable OSCs.

Chemistry↗

Versatile Sequential Casting Processing for Highly Efficient and Stable Binary Organic Photovoltaics

Forming an ideal bulk heterojunction (BHJ) morphology is a critical issue governing the photon to electron process in organic solar cells (OSCs). Complementary to the widely-used blend casting (BC) method for BHJ construction, sequential casting (SC) can also enable similar or even better morphology and device performance for OSCs. Here, BC and SC methods on three representative donor:acceptor (D:A) blends are utilized, that is, PM6:PC 71 BM, PM6:IT-4F and PM6:L8-BO. Higher power conversion efficiencies (PCEs) in all cases by taking advantage of beneficial morphology from SC processing are achieved, and a champion PCE of 18.86% (certified as 18.44%) based on the PM6:L8-BO blend is reached, representing the record value among binary OSCs. The observations on phase separation and vertical distribution inspire the proposal of the swelling–intercalation phase-separation model to interpret the morphology evolution during SC processing. Further, the vertical phase segregation is found to deliver an improvement of device performance via affecting the charge transport and collection processes, as evidenced by the D:A-ratio-dependent photovoltaic properties. Besides, OSCs based on SC processing show advantages on device photostability and upscale fabrication. Finally, this work demonstrates the versatility and efficacy of the SC method for BHJ-based OSCs.

14 SOLAR ENERGY↗

Effect of Aromatic Solvents Residuals on Electron Mobility of Organic Single Crystals

Balanced electron and hole transport properties are essential for various organic electrical/optoelectrical applications such as organic solar cells, complementary circuits, and light-emitting transistors. However, the electron transport in organic semiconductor lags far behind the hole side, making it with vital significance to seek the factors that limit the electron mobility. Here, the authors demonstrate that the π-conjugated solvents, as essential components in the widely-used solution processing techniques, can significantly suppress the electron transport if they are not properly removed and trapped as residuals. Single crystals of typical p-type materials exhibit a transition from p-type behavior to ambipolar conductance via reducing the amount of solvent residuals, and the same effect is confirmed by varied p-type materials and solvents. The highest electron mobility reaches 0.027 cm 2 V –1 s –1 and 0.029 cm 2 V –1 s –1 for 6,13-bis(triisopropylsilylethynyl)pentacene and 5,15-bis(triisopropylsilylethynyl)tetrabenzoporphyrin, respectively. Finally, this work discloses the non-negligible existence of solvent residuals even in high quality, long-range ordered organic single crystals, and further provides efficient strategies to harvest the n-type behaviors of organic semiconductor materials.

36 MATERIALS SCIENCE↗

Compromising Charge Generation and Recombination with Asymmetric Molecule for High-Performance Binary Organic Photovoltaics with Over 18% Certified Efficiency

Balancing the charge generation and recombination constitutes a major challenge to break the current limit of organic photovoltaics (OPVs). Here, to address this issue, an asymmetric non-fullerene acceptor, namely the AC9, is developed and high-performance OPV with a champion efficiency of 18.43% (18.1% certified) is demonstrated. This represents the record value among binary OPVs. Comprehensive analysis on exciton dissociation, charge collection, carrier transport, and recombination has been carried out, unveiling that the improved device performance of asymmetric AC9-based OPVs is originated from a better compromise between charge generation and non-radiative charge recombination, compared with the corresponding symmetric ones. This work provides a high-performing molecule and paves the way for high-performance OPVs through asymmetric molecular design.

36 MATERIALS SCIENCE↗

Boosting photovoltaic performance of ternary organic solar cells by integrating a multi-functional guest acceptor

Constructing ternary structure is one of the most effective design strategies to break the efficiency ceiling of traditional binary organic solar cells (OSCs). Here, a new Y-series non-fullerene acceptor (Y-T) featuring 1,3-diethyl-2-thiobarbituric acid (DTBA) end groups is developed as a third component for the classical PM6:Y6 binary system. The champion power conversion efficiency of ternary OSCs is increased from 15.64% to 17.37% via incorporating 10 wt% Y-T, with the simultaneously enhanced open-circuit voltage (Voc) of 0.865 V, a short-circuit current density (Jsc) of 26.90 mA/cm 2 , and a fill factor (FF) of 74.97%. The positive contribution of Y-T in the ternary blend can be ascribed to the improved spectroscopic complementarity and enhanced exciton utilization ratio due to the additional energy transfer process. Moreover, Y-T guest acceptor plays a critical role in adjusting the active layer morphology and facilitating three-dimension phase separation, resulting in a balanced charge transport and enhanced FF of ternary OSCs. Overall, this work provides insight into the molecular design of non-fullerene acceptor and suggest guidelines to rationally select guest component for ternary OSCs.

14 SOLAR ENERGY↗

Conductive Metallophthalocyanine Framework Films with High Carrier Mobility as Efficient Chemiresistors

Abstract The poor electrical conductivity of two‐dimensional (2D) crystalline frameworks greatly limits their utilization in optoelectronics and sensor technology. Herein, we describe a conductive metallophthalocyanine‐based NiPc‐CoTAA framework with cobalt(II) tetraaza[14]annulene linkages. The high conjugation across the whole network combined with densely stacked metallophthalocyanine units endows this material with high electrical conductivity, which can be greatly enhanced by doping with iodine. The NiPc‐CoTAA framework was also fabricated as thin films with different thicknesses from 100 to 1000 nm by the steam‐assisted conversion method. These films enabled the detection of low‐concentration gases and exhibited remarkable sensitivity and stability. This study indicates the enormous potential of metallophthalocyanine‐based conductive frameworks in advanced stand‐off chemical sensors and provides a general strategy through tailor‐make molecular design to develop sensitive and stable chemical sensors for the detection of low‐concentration gases.

Yue, Yan↗

Conductive Metallophthalocyanine Framework Films with High Carrier Mobility as Efficient Chemiresistors

Abstract The poor electrical conductivity of two‐dimensional (2D) crystalline frameworks greatly limits their utilization in optoelectronics and sensor technology. Herein, we describe a conductive metallophthalocyanine‐based NiPc‐CoTAA framework with cobalt(II) tetraaza[14]annulene linkages. The high conjugation across the whole network combined with densely stacked metallophthalocyanine units endows this material with high electrical conductivity, which can be greatly enhanced by doping with iodine. The NiPc‐CoTAA framework was also fabricated as thin films with different thicknesses from 100 to 1000 nm by the steam‐assisted conversion method. These films enabled the detection of low‐concentration gases and exhibited remarkable sensitivity and stability. This study indicates the enormous potential of metallophthalocyanine‐based conductive frameworks in advanced stand‐off chemical sensors and provides a general strategy through tailor‐make molecular design to develop sensitive and stable chemical sensors for the detection of low‐concentration gases.

Yue, Yan↗

Long-range ordering of composites for organic electronics: TIPS-pentacene single crystals with incorporated nano-fibers

Multi-component active materials are widely used for organic electronic devices, with every component contributing complementary and synergistic optoelectronic functions. Mixing these components generally leads to lowered crystallinity and weakened charge transport. Therefore, preparing the active materials without substantially disrupting the crystalline lattice is highly desired. In this paper, we show that crystallization of TIPS-pentacene from solutions in the presence of fluorescent nanofibers of a perylene bisimide derivative (PBI) leads to formation of composites with nanofiber guest incorporated in the crystal host. In spite of the binary composite structure, the TIPS-pentacene maintains the single-crystalline nature. As a result, the incorporation of the PBI guest introduces additional fluorescence function but does not significantly reduce the charge transport property of the TIPS-pentacene host, exhibiting field-effect mobility as high as 3.34 cm 2 V -1 s -1 even though 26.4% of the channel area is taken over by the guest. Finally, as such, this work provides a facile approach toward high-performance multifunctional organic electronic materials.

36 MATERIALS SCIENCE↗

A Low-Temperature, Solution-Processable Organic Electron-Transporting Layer Based on Planar Coronene for High-performance Conventional Perovskite Solar Cells

A low-temperature, solution-processable organic electron-transporting material (ETM) is successfully developed for efficient conventional n-i-p perovskite solar cells (PVSCs). This ETM can show a high efficiency over 17% on rigid device and 14.2% on flexible PVSC. Lastly, to the best of our knowledge, this efficiency is among the highest values reported for flexible n-i-p PVSCs with negligible hysteresis thus far.

14 SOLAR ENERGY↗

Nanoparticles Incorporated inside Single-Crystals: Enhanced Fluorescent Properties

Incorporation of guest materials inside single-crystalline hosts leads to single-crystal composites that have become more and more frequently seen in both biogenic and synthetic crystals. The unique composite structure together with long-range ordering promises special properties that are, however, less often demonstrated. In this study, we examine the fluorescent properties of quantum dots (QDs) and polymer dots (Pdots) encapsulated inside the hosts of calcite single-crystals. Two CdTe QDs and two Pdots are incorporated into growing calcite crystals, as the QDs and Pdots are dispersed in the crystallization media of agarose gels. As a result, enhanced fluorescent properties are obtained from the QDs and Pdots inside calcite single-crystals with greatly improved photostability and significantly prolonged fluorescence lifetime, compared to those in solutions and gels. Particularly, the fluorescence lifetime increases by 0.5-1.6 times after the QDs or Pdots are incorporated. The enhanced fluorescent properties indicate the advantages of encapsulation by single-crystal hosts that provide dense shells to isolate the fluorescent nanoparticles from atmosphere. As such, this work has implications for advancing the research of single-crystal composites toward their functional design.

36 MATERIALS SCIENCE↗

Boost the electron mobility of solution-grown organic single crystals via reducing the amount of polar solvent residues

Enhancing electron transport to match with the development in hole transport is critical for organic electronics in the future. As electron motion is susceptible to extrinsic factors, seeking these factors and avoiding their negative effects have become the central challenge. Here, the existence of polar solvent residues in solution-grown single-crystals of 6,13-bis(triisopropylsilylethynyl)-5,7,12,14-tetraazapentacene is identified as a factor detrimental to electron motion. Field-effect transistors of the crystals exhibit electron mobility boosted by about 60% after the residues are removed. The average electron mobility reaches up to 8.0 ± 2.2 cm 2 V –1 s –1 with a highest value of 13.3 cm 2 V –1 s –1 ; these results are significantly higher than those obtained previously for the same molecule (1.0–5.0 cm 2 V –1 s –1 ). Furthermore, the achieved mobility is also higher than the maximum reported electron mobility for organic materials (11 cm 2 V –1 s –1 ). As a result, this work should greatly accelerate the advancement of organic electron-transporting materials.

36 MATERIALS SCIENCE↗

Preparation and photo-induced charge transfer of the composites based on 3D structural CdS nanocrystals and MEH-PPV

We report the synthesis of 3D structural CdS nanocrystals by a simple biomolecule-assisted hydrothermal process. The CdS nanocrystals are composed of many branched nanorods with the diameter of about 50 nm, and the length of about 250 nm. The phase and crystallographic properties are characterized by scanning electron microscopy (SEM), transmission electron microscopy (TEM), and X-ray diffractometry (XRD). The composites based on CdS nanocrystals and poly[2-methoxy-5-(2-ethylhexyloxy-p-phenylenevinylene)] (MEH-PPV) have been prepared by spin-coating of the mixture in the common solvent. The optical properties of the composites are investigated using ultraviolet-visible (UV-Vis) absorption and photoluminescence (PL) spectroscopies. A significant fluorescence quenching of MEH-PPV in the composites is observed at high CdS nanocrystals/MEH-PPV ratios, indicating that the photo-induced charge transfer occurred due to the energy level offset between the donor MEH-PPV and the acceptor CdS nanocrystals. The obvious photovoltaic behavior of the solar cell made from this composite further demonstrates the mentioned photo-induced charge transfer process. (author)

14 SOLAR ENERGY↗