Enhanced laser–plasma interactions using non-imaging optical concentrator targets
Not Available
Engineering topics
Publications and source records attributed to Chen, Hui.
Not Available
Abstract Early work with viologen‐mediated nitrogenase bio‐electrochemistry focused on bio‐electrocatalysis with the enzyme in solution, but biocatalyst immobilization at electrode surfaces is favorable as it provides a high effective concentration of biocatalyst at the electrode surface. We have used a pyrene–peptide linker as a method for immobilizing nitrogenase on carbon electrode surfaces for nitrogenase bio‐electrocatalysis.
Majorana zero modes (MZMs) are spatially-localized zero-energy fractional quasiparticles with non-Abelian braiding statistics that hold promise for topological quantum computing. Owing to the particle-antiparticle equivalence, MZMs reflect quantized conductance at low temperature. By utilizing variable-tunnel-coupled scanning tunneling spectroscopy, we study tunneling conductance of vortex bound states on FeTe 0.55 Se 0.45 superconductors. Here, we report observations of conductance plateaus as a function of tunnel coupling for zero-energy vortex bound states with values close to or even reaching the 2 e 2 / h quantum conductance (here e is the electron charge and h is Planck’s constant). In contrast, no plateaus were observed on either finite energy vortex bound states or in the continuum of electronic states outside the superconducting gap. This behavior of the zero-mode conductance confirms the existence of MZMs in FeTe 0.55 Se 0.45 .
To improve the boron-removal efficiency of metallurgical-grade silicon by increasing the reaction rate, a combined method with the 30 mol pct CaO-23.3 mol pct SiO{sub 2}-46.7 mol pct CaCl{sub 2} slag treatment and ammonia injection at 1723 K to 1823 K was proposed. For 1 hour and at 1823 K, the maximum removal efficiency of boron was 98 pct, and the final boron concentration in silicon decreased to 1.5 ppmw by the present method without the introduction of the iron catalyst. A kinetic model was also established to clarify the reaction mechanism and rate-limiting steps of this complicated boron-removal process. In this model, the rate-limiting step is the mass transfer of boron oxide at the interface between the slag and silicon phase.
Not Available
Abstract The relationship between risk of esophageal squamous cell carcinoma (ESCC) and adult height, changes in individual body mass index (BMI) and body shape is not established. We performed a large population‐based case‐control study, which enrolled a total of 1414 ESCC cases and 1989 controls in a high‐incidence area in China. Using face‐to‐face interview with a structured questionnaire, information on participants' heights, weights, and perceived body shapes at 20 years of age was collected. Additionally, data on weight and perceived body shape among the same participants 10 years prior to ascertainment were collected using the same method. Odd ratios (ORs) of ESCC risk in relation to BMI and body shape were estimated using unconditional logistic regression models. The adjusted results indicated that ESCC risk in adults rapidly rose as height increased, plateauing at 170 cm among men and 157 cm among women. Among participants who were underweight, normal weight, or thinner than body shape 4, body weight loss was associated with increased risk of ESCC, and body weight gain was associated with decreased incidence of ESCC (ORs ranging from 0.40 to 0.76). Notably, however, changes in body weight did not significantly affect ESCC risk among participants who were overweight, obese, or larger than body shape 3. Maintaining a fit body shape and a reasonable BMI is advisable and of vital importance to reduce the risk of ESCC, especially in high‐risk areas.
We report two chlorine-substituted isomers, ITIC-2Cl-β and α-ITIC-2Cl, were synthesized for potential use as nonfullerene acceptors. The two molecules differ in the position of chlorine atoms, leading to symmetric (ITIC-2Cl-β) and asymmetric (α-ITIC-2Cl) molecular configuration. In single crystals, the two molecules exhibit a completely different arrangement and stacking as derived from X-ray diffraction analysis. Whereas ITIC-2Cl-β has a linear packing structure, a-ITIC-2Cl forms a 3D interpenetrating network structure with shorter π-π distances and better molecular planarity. Therefore, a high power conversion efficiency of >12% is obtained by α-ITIC-2Cl-based devices. It is similar to ~10% higher than that of ITIC-2Cl-β-based devices due to the chlorine substituent effect. Thus the fine-tuning of the Cl-substituted position seems to be a promising strategy to construct a 3D interpenetrating charge transportation network and achieve higher performance organic solar cells (OSCs).
Vortices in topological superconductors host Majorana zero modes (MZMs), which are proposed to be building blocks of fault-tolerant topological quantum computers. Recently, a new single-material platform for realizing MZM has been discovered in iron-based superconductors, without involving hybrid semiconductor-superconductor structures. Here we report on a detailed scanning tunneling spectroscopy study of a FeTe 0.55 Se 0.45 single crystal, revealing two distinct classes of vortices present in this system which differ by a half-integer level shift in the energy spectra of the vortex bound states. This level shift is directly tied with the presence or absence of zero-bias peak and also alters the ratios of higher energy levels from integer to half-odd-integer. Our model calculations fully reproduce the spectra of these two types of vortex bound states, suggesting the presence of topological and conventional superconducting regions that coexist within the same crystal. Our findings provide strong evidence for the topological nature of superconductivity in FeTe 0.55 Se 0.45 and establish it as an excellent platform for further studies on MZMs.
A novel magnetically driven reconnection platform was created by a pair of U-shaped Cu coils that connect two parallel Cu plates irradiated at a focused laser intensity of ~3 × 10 16 W/cm 2 and characterized using ultrafast proton radiography. The proton data show two prolate voids, each corresponding to the coil current, with an inferred maximum magnitude of 57 ± 4 kA. A center “flasklike” feature was also observed in the proton radiographs. By prescribing electromagnetic fields associated with magnetic reconnection in proton ray tracing simulations, characteristics of this center feature were reproduced. Finally, these results demonstrate the robustness of the laser-driven capacitor coils for generating strong magnetic fields and provide promise of using such coils as a viable platform for studying magnetically driven reconnection in the laboratory.
Room temperature ionic liquids (RTILs) are solvent-free liquids comprised of densely packed cations and anions. Properties of Py13Cl–AlCl 3 ILs were studied and compared with EMIC-AlCl 3 ILs for use as electrolyte in Al–graphite battery.
For optimum coverage of the optical spectrum and further enhancement of the carrier transport, ternary and even more multi-composition strategies have been universally explored. As PC 71 BM and PC 61 BM are both compatible with PTB7-Th and IEICO-4F takes advantage of optical absorption in the near-infrared region, we combined PTB7-Th:IEICO-4F:PC 71 BM:PC 61 BM quaternary compositions to fabricate high-efficiency polymer solar cells (PSCs) with good tolerance ratios of the fullerene acceptors. After blending the fullerene alloys PC 71 BM and PC 61 BM into the host PTB7-Th:IEICO-4F system, the optical response in the whole wavelength regime has been strengthened with significantly enhanced electron mobility. Concomitantly, the short-circuit current density ( J sc ) surged from 22.07 to 24.37 mA cm –2 and the fill factor (FF) ascended from 58.24% to 69.30%, which finally resulted in a champion power conversion efficiency (PCE) of 12.52%, which is much higher than that of the binary control device (9.67%). This significant improvement is attributed to the fine-tuning of the morphology of the photo-active layer and feasible carrier transport. Interestingly, this finding implicates the synergistic effect of PC 71 BM and PC 61 BM to successfully enhancing the carrier transport. In addition, it demonstrates a broad tolerance of the acceptor proportions, resulting in higher PCE values for the quaternary devices as compared to the ternary devices. Lastly, generality for other systems evidences and provides guidelines for quaternary strategy utilization. Furthermore, the simplicity of quaternary strategies could be greatly beneficial to not yet elaborate commercial processes.
Chlorination and selenophene were used to develop benzothiadiazole-based polymers for high-performance polymer solar cells (PSCs). The introduction of selenophene can increase crystallinity due to the metalloid nature of selenium and thus facilitate charge transport. Chlorination can tune the energy levels and induce strong aggregation due to its unique features. A non-chlorinated polymer with selenophene, PBT3TSe, shows a highly crystalline structure and a dominant face-on orientation, consequently attaining a high short-circuit current (J(SC)). Chlorinated PBT3TClSe displays synergy between the advantages of chlorination and selenophene to achieve elevated photovoltaic performance, with a power conversion efficiency (PCE) approaching 9.89% in PC 71 BM-based devices. Interestingly, chlorination has an important influence on morphology of the polymer and polymer blend films, resulting in a severe aggregation and mixed face-on and edge-on orientation in the blend film. But the sufficient intermingling of donor and acceptor and the closer distances between molecules from the introduction of the chlorine and selenophene offset their morphological inferiority to achieve higher solar conversion.
Enantiomerically pure chiral amines are of increasing value in the preparation of bioactive compounds, pharmaceuticals, and agrochemicals. ω-Transaminase (ω-TA) is an ideal catalyst for asymmetric amination because of its excellent enantioselectivity and wide substrate scope. To shift the equilibrium of reactions catalyzed by ω-TA to the side of the amine product, an upgraded N 2 fixation system based on bioelectrocatalysis was developed to realize the conversion from N 2 to chiral amine intermediates. The produced NH3 was in situ reacted with l-alanine dehydrogenase to generate alanine with NADH as a coenzyme. ω-TA transferred the amino group from alanine to ketone substrates and finally produced the desired chiral amine intermediates. The cathode of the upgraded N 2 fixation system supplied enough reducing power to synchronously realize the regeneration of reduced methyl viologen (MV •+ ) and NADH for the nitrogenase and l-alanine dehydrogenase. The coproduct, pyruvate, was consumed by l-alanine dehydrogenase to regenerate alanine and push the equilibrium to the side of amine. After 10 h of reaction, the concentration of 1-methyl-3-phenylpropylamine achieved 0.54 mM with the 27.6% highest faradaic efficiency and >99% enantiomeric excess (eep). Because of the wide substrate scope and excellent enantioselectivity of ω-TA, the upgraded N2 fixation system has great potential to produce a variety of chiral amine intermediates for pharmaceuticals and other applications.
Very small amounts of 1,8-diiodooctane (DIO) are very effective at optimizing the performance of polymer solar cells (PSCs). To date, the underlying influences are not yet fully understood, especially in nonfullerene PSCs. Herein, the influence of DIO on carrier dynamics and morphology in the PBDBT2Cl:IT4F system was investigated in detail. We combined the characterization of the transient dynamics with the morphology characterization of PSC devices to explore the origin of enhanced performance. Compared to the cast device, the champion device with 0.5% DIO revealed the maximum of current density (J sc ) and fill factor (FF). The optimum DIO content helps to enhance carrier transport and optimize morphology, while excess DIO produces adverse effects due to the induced intense aggregation and dilated size in blend films. The results provide some hints of improved device performance upon using DIO as an additive in nonfullerene PSCs.