Search NASA⌕ Search

Engineering topics

Chen, J

Publications and source records attributed to Chen, J.

At least 109 records · Page 6

Ex-vessel neutron dosimetry analysis for westinghouse 4-loop XL pressurized water reactor plant using the RadTrack{sup TM} Code System with the 3D parallel discrete ordinates code RAPTOR-M3G

Traditional two-dimensional (2D)/one-dimensional (1D) SYNTHESIS methodology has been widely used to calculate fast neutron (>1.0 MeV) fluence exposure to reactor pressure vessel in the belt-line region. However, it is expected that this methodology cannot provide accurate fast neutron fluence calculation at elevations far above or below the active core region. A three-dimensional (3D) parallel discrete ordinates calculation for ex-vessel neutron dosimetry on a Westinghouse 4-Loop XL Pressurized Water Reactor has been done. It shows good agreement between the calculated results and measured results. Furthermore, the results show very different fast neutron flux values at some of the former plate locations and elevations above and below an active core than those calculated by a 2D/1D SYNTHESIS method. This indicates that for certain irregular reactor internal structures, where the fast neutron flux has a very strong local effect, it is required to use a 3D transport method to calculate accurate fast neutron exposure. (authors)

21 SPECIFIC NUCLEAR REACTORS AND ASSOCIATED PLANTS↗

Design of a Large 5 T Superconducting Magnet for Polarized Target for JLAB Hall B 12 GeV Upgrade Clas12 Detector

Hall B at Jefferson Laboratory (JLAB) will need a 5 T, 78 cm bore polarized target magnet with a field uniformity of {Delta}B/B{sub 0} <; 10{sup -4} in a useful cylinder of the dimensions 0.04 m long x 0.02 m in diameter. The large magnet is designed with a superconducting coil that provides the solenoid with nearly perfect self shielding in order to reduce the fringe field at nearby photo multiplier tubes (PMTs) to less than 3.5 mT. Because the solenoid is also very close to the Clas12 Torus, the nearly perfect shielding provided by the self shielded solenoid greatly reduces force, field, and torque interactions with the six-coil Torus magnet. The solenoid coil consists of 18 coil modules which are made of coils mounted in aluminum plate discs. Each coil module consists of dual double pancake coils with main coils and shield coil partitioned into separate winding cavities in the aluminum plate discs to distribute and reduce radial hoop load and radial coil forces. Each coil module is effectively an enclosed aluminum box and this serves to partition the axial load and thus reduces coil axial forces. Since overall coil forces within each coil module are reduced, this will greatly reduce the number coil training quenches. This is a very important consideration for this solenoid coil because the coil cooling is adiabatic, using in-direct conduction cooling by 4.5 K supercritical helium, which will provide only a relatively small temperature stability margin. Super critical helium is used as per JLAB specification. Detail design of the coil structure, coil assembly, cold mass, and cryogenic control will be presented. The magnet protection system shall be capable of the following features: (1) quench and fault detection, (2) fast discharge of the magnet, (3) limit fault voltages to safe values, (4) monitor interlock signals to prevent unsafe operation, and (5) provide control logic necessary for safe operation of the solenoid. The instrument systems shall be capable of the following features: (1) monitors and display temperatures within the solenoid magnet, (2) measure loads or stress on the magnet suspension, (3) monitor voltages within the solenoid magnet and charging bus, (4) monitor pressures and (5) use data logging system to save all sensor data. These systems will be described and a quench analysis presented.

43 PARTICLE ACCELERATORS↗

Preliminary Design of JLAB Clas12 Large Superconducting Torus Magnet

Hall B at Jefferson Laboratory (JLAB) will need a 6-coil Torus producing a required integral of B-dl for an upgrade 12 GeV beam. In Sept. 2009, Wang NMR was awarded a contract to design, fabricate, assemble, deliver, and test at JLAB this ex citing magnet. The preliminary design review was completed by Dec. 2009 and intermediate design review will be completed by July 2010. Proto type coil construction, production of soldered conductor with SSC cable and final design review will be completed in 2010. We shall describe preliminary design and intermediate design for coil/cryostat, Torus central cylinder (hub), 48 cold mass suspensions, two intercoil support rings, cryocontrol tower, and adapter to Torus coil, magnet quench protection, and charge/ discharge con trol, and the two parallel path cooling design using supercritical helium. Because of coil in-plane and out-of-plane EM forces over these huge thin coils in addition to vacuum load, gravity load, and cool down thermal stress, we shall present the finite element analyses (FEA) on coil structure, 48 cold mass supports, intercoil cold rings, coil/ cryostat vacuum vessel, cryotower cryostat, and Torus hub. Finally, we shall shows that all pressure/ vacuum vessels and its weldment has satisfied ASME code.

43 PARTICLE ACCELERATORS↗

Effect of the electron initial longitudinal velocity on the nonsequential double-ionization process

The effect of initial longitudinal velocity of the first tunneling electron on the nonsequential double-ionization (NSDI) process is studied using a semiclassical model. Our analysis shows that nonzero initial longitudinal velocity affects two distinct typical trajectories [single-return collision (SRC) and multiple-return collision (MRC)] in the NSDI process in different ways: for SRC, the yield in the center part of the correlation momentum distribution is reduced; for MRC, the tunneling time of the first electron is apparently delayed. In comparison with the case of zero initial longitudinal velocity, the double ionization is suppressed for a long wavelength, and a better agreement with the experimentally observed electron correlation distribution is achieved when the nonzero initial longitudinal velocity is taken into account.

74 ATOMIC AND MOLECULAR PHYSICS↗

Tunable magnetic flux sensor using a metallic Rashba ring with half-metal electrodes

We propose a magnetic field sensor consisting of a square ring made of metal with a strong Rashba spin-orbital coupling (RSOC) and contacted to half-metal electrodes. Due to the Aharonov-Casher effect, the presence of the RSOC imparts a spin-dependent geometric phase to conduction electrons in the ring. The combination of the magnetic flux emanating from the magnetic sample placed below the ring, and the Aharonov-Casher effect due to RSOC results in spin interference, which modulates the spin transport in the ring nanostructure. By using the tight-binding nonequilibrium Green's function formalism to model the transport across the nanoring detector, we theoretically show that with proper optimization, the Rashba ring can function as a sensitive and tunable magnetic probe to detect magnetic flux.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗

Generation of narrow-bandwidth, tunable, coherent xuv radiation using high-order harmonic generation

We theoretically demonstrate the generation of wavelength-tunable, narrow-bandwidth extreme-ultraviolet (xuv) radiation by high-order harmonic generation (HHG) driven by an orthogonally polarized two-color laser field, which is composed of a 10-fs, 1500-nm laser pulse and a 40-fs, 2400-nm laser pulse. By performing classical analysis, we reveal that the rapid change of electron wave-packet dynamics at a subcycle time scale confines high-order harmonic emission to a small spectral region, leading to the generation of narrow-bandwidth xuv radiation. Furthermore, the central wavelength of the xuv radiation can be continuously tuned over a wide range by changing either the peak intensity of the driver laser or the amplitude ratio between the two laser fields at different wavelengths. It is also verified that the use of driver pulses at longer wavelengths leads to a better spectral confinement of the xuv radiation.

71 CLASSICAL AND QUANTUM MECHANICS, GENERAL PHYSIC↗

Dependence of texture evolution on initial orientation in drawn single crystal copper

The evolution of fiber texture in the drawn single crystal copper wires with initial orientations of < 100>, < 110> and < 111> parallel to axis direction has been studied via electron backscattering diffraction. During cold drawing process, grain subdivision takes place in the < 100>, < 110> and < 111> single crystals. At high strains, a mixture of < 111> and < 100> fiber textures forms, but due to uneven shear strain, the distribution of the < 111> and < 100> fiber textures is inhomogeneous along the radial direction of wires. The < 111> fiber texture component is located in the centre of wires and < 100> is near the surface. Although grain subdivision appears in the < 100>, < 110> and < 111> single crystals, the stability of the three initial orientations is different. The initial orientations of < 100> and < 111> are more stable than < 110>. < 100> is stable at low strains while < 111> becomes stable at high strains. - Research Highlights: {yields} In drawn < 111> and < 100> single crystals, grain subdivision still takes place. {yields} The initial orientations of < 111> and < 100> more stable than < 110>. {yields} < 100> fiber texture located near the surface and < 111> in the centre. {yields} < 100> is stable at low strains but < 111> becomes stable at high strains.

36 MATERIALS SCIENCE↗

Suppression of superconductivity in epitaxial NbN ultrathin films

This paper studies the suppression of superconducting transition temperature (T{sub c}) of ultrathin NbN film. We fabricated epitaxial NbN superconducting thin films of thicknesses ranging from 2.5 to 100 nm on single crystal MgO (100) substrates by dc magnetron sputtering. We performed structure analyses and measured their electric and far infrared properties. The experimental results were compared with several mechanisms of the suppression of superconductivity proposed in the literature, including the weak localization effect, the proximity effect, and quantum size effect (electron wave leakage model). We found that the electron wave leakage model matches best to the experimental data.

36 MATERIALS SCIENCE↗

Spins and parities of astrophysically important {sup 30}S states from {sup 28}Si({sup 3}He, n{gamma}){sup 30}S

The structure of proton-unbound {sup 30}S states strongly determines the thermonuclear {sup 29}P(p,{gamma}){sup 30}S reaction rate at temperatures characteristic of explosive hydrogen burning in classical novae and type I x-ray bursts. Specifically, the rate had been previously predicted to be dominated by two low-lying, unobserved, levels in the E{sub x}= 4.7-4.8 MeV region, with spin and parity assignments of 3{sup +} and 2{sup +}. In recent experimental work, two candidate levels were observed with energies of 4.699 MeV and 4.814 MeV, but no experimental information on their spins and parities was obtained. We have performed an in-beam {gamma}-ray spectroscopy study of {sup 30}S with the {sup 28}Si({sup 3}He, n{gamma}){sup 30}S reaction. By constructing the decay schemes of proton-unbound states with a {gamma}-{gamma} coincidence analysis of their decay {gamma} rays, their J{sup {pi}} values were inferred from a comparison to the known decay schemes of the corresponding mirror states in {sup 30}Si. For the two aforementioned states, our results strongly corroborate the spin-parity assignments assumed in recent evaluations of the {sup 29}P(p,{gamma}){sup 30}S reaction rate.

73 NUCLEAR PHYSICS AND RADIATION PHYSICS↗

Toward practical gas sensing with highly reduced graphene oxide : a new signal processing method to circumvent run-to-run and device-to-device variations.

Graphene is worth evaluating for chemical sensing and biosensing due to its outstanding physical and chemical properties. We first report on the fabrication and characterization of gas sensors using a back-gated field-effect transistor platform with chemically reduced graphene oxide (R-GO) as the conducting channel. These sensors exhibited a 360% increase in response when exposed to 100 ppm NO{sub 2} in air, compared with thermally reduced graphene oxide sensors we reported earlier. We then present a new method of signal processing/data interpretation that addresses (i) sensing devices with long recovery periods (such as required for sensing gases with these R-GO sensors) as well as (ii) device-to-device variations. A theoretical analysis is used to illuminate the importance of using the new signal processing method when the sensing device suffers from slow recovery and non-negligible contact resistance. We suggest that the work reported here (including the sensor signal processing method and the inherent simplicity of device fabrication) is a significant step toward the real-world application of graphene-based chemical sensors.

47 OTHER INSTRUMENTATION↗

Defect Generation and Propagation in MC-Si Ingots: Influence on Cell-to-Cell Performance Variation

This paper describes results of our study aimed at understanding mechanism(s) of dislocation generation and propagation in multicrystalline silicon (mc-Si) ingots, and evaluating their influence on the solar cell performance. This work was done in two parts: (i) Measurement of dislocation distributions along various bricks, selected from strategic locations within several ingots; and (ii) Theoretical modeling of the cell performance corresponding to the measured dislocation distributions. Solar cells were fabricated on wafers of known dislocation distribution, and the results were compared with the theory. These results show that cell performance can be accurately predicted from the dislocation distribution, and the changes in the dislocation distribution are the primary cause for variations in the cell-to-cell performance. The dislocation generation and propagation mechanisms, suggested by our results, are described in this paper.

14 SOLAR ENERGY↗

Algebraic distance on graphs.

Measuring the connection strength between a pair of vertices in a graph is one of the most important concerns in many graph applications. Simple measures such as edge weights may not be sufficient for capturing the effects associated with short paths of lengths greater than one. In this paper, we consider an iterative process that smooths an associated value for nearby vertices, and we present a measure of the local connection strength (called the algebraic distance; see [D. Ron, I. Safro, and A. Brandt, Multiscale Model. Simul., 9 (2011), pp. 407-423]) based on this process. The proposed measure is attractive in that the process is simple, linear, and easily parallelized. An analysis of the convergence property of the process reveals that the local neighborhoods play an important role in determining the connectivity between vertices. We demonstrate the practical effectiveness of the proposed measure through several combinatorial optimization problems on graphs and hypergraphs.

99 GENERAL AND MISCELLANEOUS↗

Design of far-infrared three-wave polarimeter-interferometer system for the J-TEXT tokamak

A multichannel three-wave far-infrared polarimeter-interferometer will be constructed on the J-TEXT tokamak (R=1.05 m, a=0.27 m, B{sub T}{<=}3 T, and I{sub P}{<=}350 kA) for current density profile and electron density profile measurements. The system will adopt the three-wave polarimeter configuration which was first introduced on RTP. Three 432.5 {mu}m HCOOH lasers pumped by three CO{sub 2} lasers separately will be adopted, which could generate high output power, nearly 50 mW at each cavity. Two of them will be counter-rotating circularly polarized to probe the Faraday angle, while the third laser will be used as a local oscillator to get the phase shift caused by electron density. Excellent port access (600x76 mm{sup 2}) and high laser power would promise a profile measurement across the whole plasma section with good signal quality. A high-speed digital phase comparator with a few ({approx}2) {mu}s temporal resolution will be developed, so that fast changes of current or density profile could be measured. Six channels will be installed in the first stage.

46 INSTRUMENTATION RELATED TO NUCLEAR SCIENCE AND ↗

Particle simulation of femtosecond laser stimulation of electrical discharges in small gaps

A particle-in-cell/Monte Carlo collision simulation study of femtosecond laser stimulation of electrical discharges in submicron gaps between platinum scanning tunneling microscope cathode tips and gold film anodes in atmospheric pressure argon gas is described. The breakdown potential of gaps containing either preloaded electrons or preloaded neutral and ionized platinum atoms and electrons at various densities were compared to the breakdown potential of gaps with background argon gas alone. It was found that gaps preloaded with sufficient densities of either electrons or partially ionized electrode materials broke down at cathode potential of -80 V while gaps with background argon gas alone required applied cathode potentials between -200 to -250 V to cause a breakdown. Also, partially ionized material was much more effective at stimulating breakdown than electrons alone. The density of preloaded partially ionized platinum required to lower breakdown cathode potential to -80 V was approximately 12.5 times smaller than that required for the preloaded electrons alone in the same size gap. Analysis of the mechanism by which the preloaded partially ionized material promoted breakdown showed that laser ablated ions located near the cathode tip increased the local field at the cathode surface and the field-emitted electron flux from the cathode. This higher electron flux ionized background argon gas and preloaded platinum which resulted in gap breakdown. The threshold density of partially ionized platinum for gap breakdown varied approximately linearly with applied cathode potential.

70 PLASMA PHYSICS AND FUSION TECHNOLOGY↗

Generation of an XUV supercontinuum by optimization of the angle between polarization planes of two linearly polarized pulses in a multicycle two-color laser field

We theoretically investigate the high-order harmonic generation (HHG) in helium using a two-color laser field synthesized by an intense 25-fs laser pulse at 800 nm and a relatively weak {approx}43-fs laser pulse at 1400 nm. When the polarization between the two pulses is arranged at an angle of {approx}73 deg., supercontinuum spectra are dramatically broadened to 180 eV, which is sufficient to support an isolated {approx}73-as pulse without any phase compensation. The physical mechanisms behind the phenomenon are well explained in terms of quantum and classical analyses. Furthermore, in the long-pulse regime, this method of extending the supercontinuum spectrum shows the significant advantage over previous two-color HHG schemes.

74 ATOMIC AND MOLECULAR PHYSICS↗

Structure of {sup 30}S with {sup 32}S(p,t){sup 30}S and the thermonuclear {sup 29}P(p,{gamma}){sup 30}S reaction rate

The structure of proton unbound {sup 30}S states is important for determining the {sup 29}P(p,{gamma}){sup 30}S reaction rate, which influences explosive hydrogen burning in classical novae and type I x-ray bursts. The reaction rate in this temperature regime had been previously predicted to be dominated by two low-lying, unobserved, J{sup {pi}=} 3{sup +} and 2{sup +} resonances above the proton threshold in {sup 30}S. To search for these levels, the structure of {sup 30}S was studied using the {sup 32}S(p,t){sup 30}S transfer reaction with a magnetic spectrograph. We have confirmed a previous detection of a state near 4700 keV, which had tentatively been assigned J{sup {pi}=}3{sup +}. We have also discovered a new state at 4814(3) keV, which is a strong candidate for the other important resonance (J{sup {pi}=}2{sup +}). The new {sup 29}P(p,{gamma}){sup 30}S reaction rate is up to 4-20 times larger than previously determined rates over the relevant temperature range. The uncertainty in the reaction rate due to uncertainties in the resonance energies has been significantly reduced.

73 NUCLEAR PHYSICS AND RADIATION PHYSICS↗