Engineering topics

Chen, Jia-Shiang

Publications and source records attributed to Chen, Jia-Shiang.

7 records

DOE OSTI2024

Upconversion on the Micrometer Scale: Impact of Local Heterogeneity

The properties of perovskite/naphtho[2,3-a]pyrene (NaPy) upconversion devices are investigated by a combination of atomic force microscopy and photoluminescence mapping to understand the role of microscopic heterogeneity in the ensemble device properties. The results emphasize strong microscopic inhomogeneity across the perovskite/NaPy upconversion device due to local formation of NaPy microcrystals. NaPy shows emission from three distinct states in the solid state: S 1 ′ emission at 520 nm, excimer emission at 560 nm, and S 1 ″ emission at 620 nm. Clear spatial differences in the emission spectrum under 405 nm excitation are found, highlighting that there is a strong microcrystal-to-microcrystal variation in the optical properties─emphasizing a need for multimodal measurements. Furthermore, our results indicate that microcrystals with strong emission from the strongly coupled low-energy state S 1 ″ (J-dimer) show much higher upconversion intensity than those with dominant emission from the high-energy S 1 ′ state (I-aggregate). Hence, our results suggest that microcrystals with strong emission from the low-energy state S 1 ″ act as isolated hotspots for upconversion.

Crystals↗

DOE OSTI2023

Photo-induced halide redistribution in 2D halide perovskite lateral heterostructures

An improved understanding of the degradation pathways under external stimuli is needed to address stability challenges in two-dimensional (2D) perovskite semiconductor materials. Here, in this study, in situ synchrotron nanoprobe X-ray fluorescence (nano-XRF) is used to investigate the evolution of halide redistribution within various 2D halide perovskite (n = 1–3) lateral heterostructures under ultraviolet (UV) exposure. Further, the results show that iodine (I) experiences a loss in all cases, with the rate of change following the perovskite dimensionality monotonically. In contrast, bromine (Br) is relatively more stable than I in n = 2 and 3 heterostructures, with no significant change in the total Br concentration but a visible amount of Br diffusion to the previously I-rich regime. Combining nano-XRF and X-ray absorption spectroscopy (XAS), we found a reduction of dimensionality in crystals with n > 1 after UV exposure, indicating significant structural reconfiguration beyond ion migration.

2D halide perovskites↗

DOE OSTI2023

Long-lived electronic spin qubits in single-walled carbon nanotubes

Abstract Electron spins in solid-state systems offer the promise of spin-based information processing devices. Single-walled carbon nanotubes (SWCNTs), an all-carbon one-dimensional material whose spin-free environment and weak spin-orbit coupling promise long spin coherence times, offer a diverse degree of freedom for extended range of functionality not available to bulk systems. A key requirement limiting spin qubit implementation in SWCNTs is disciplined confinement of isolated spins. Here, we report the creation of highly confined electron spins in SWCNTs via a bottom-up approach. The record long coherence time of 8.2 µs and spin-lattice relaxation time of 13 ms of these electronic spin qubits allow demonstration of quantum control operation manifested as Rabi oscillation. Investigation of the decoherence mechanism reveals an intrinsic coherence time of tens of milliseconds. These findings evident that combining molecular approaches with inorganic crystalline systems provides a powerful route for reproducible and scalable quantum materials suitable for qubit applications.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

DOE OSTI2023

Chiral photocurrent in a Quasi-1D TiS 3 (001) phototransistor

The presence of in-plane chiral effects, hence spin–orbit coupling, is evident in the changes in the photocurrent produced in a TiS 3 (001) field-effect phototransistor with left versus right circularly polarized light. The direction of the photocurrent is protected by the presence of strong spin–orbit coupling and the anisotropy of the band structure as indicated in NanoARPES measurements. As hsown here, dark electronic transport measurements indicate that TiS 3 is n-type and has an electron mobility in the range of 1–6 cm 2 V –1 s –1 . I–V measurements under laser illumination indicate the photocurrent exhibits a bias directionality dependence, reminiscent of bipolar spin diode behavior. Because the TiS 3 contains no heavy elements, the presence of spin–orbit coupling must be attributed to the observed loss of inversion symmetry at the TiS 3 (001) surface.

Phototransistor Materials↗

DOE OSTI2022

Utilizing Ultraviolet Photons to Generate Single-Photon Emitters in Semiconductor Monolayers

The understanding and controlled creation of atomic defects in semiconductor transition metal dichalcogenides (TMDs) are highly relevant to their applications in high-performance quantum optics and nanoelectronic devices. Here, we demonstrate a versatile approach in generating single-photon emitters in MoS 2 monolayers using widely attainable UV light. We discover that only defects engendered by UV photons in vacuum exhibit single-photon-emitter characteristics, whereas those created in air lack quantum emission attributes. In combination with theoretical calculations, we assign the defects generated in vacuum to unpassivated sulfur vacancies, whose highly localized midgap states give rise to single-photon emission. In contrast, UV irradiation of the MoS 2 monolayers in air results in oxygen-passivated sulfur vacancies, whose optical properties are likely governed by their pristine band-to-defect band optical transitions. Furthermore, these findings suggest that widely available light sources such as UV light can be utilized for creating quantum photon sources in TMDs.

77 NANOSCIENCE AND NANOTECHNOLOGY↗

DOE OSTI2022

Room Temperature Lasing from Semiconducting Single-Walled Carbon Nanotubes

Miniaturized near-infrared semiconductor lasers that are able to generate coherent light with low energy consumption have widespread applications in fields such as optical interconnects, neuromorphic computing, and deep-tissue optogenetics. With optical transitions at near-infrared wavelengths, diameter-tunable electronic structures, and superlative optoelectronic properties, semiconducting single-walled carbon nanotubes (SWCNTs) are promising candidates for nanolaser applications. However, despite significant efforts in this direction and recent progress toward enhancing spontaneous emission from SWCNTs through Purcell effects, SWCNT-based excitonic lasers have not yet been demonstrated. Leveraging an optimized cavity-emitter integration scheme enabled by a self-assembly process, here we couple SWCNT emission to the whispering gallery modes supported by polymer microspheres, resulting in room temperature excitonic lasing with an average lasing threshold of 4.5 kW/cm 2 . The high photostability of SWCNTs allows stable lasing for prolonged duration with minimal degradation. Finally, this experimental realization of excitonic lasing from SWCNTs, combined with their versatile electronic and optical properties that can be further controlled by chemical modification, offers far-reaching opportunities for tunable near-infrared nanolasers that are applicable for optical signal processing, in vivo biosensing, and optoelectronic devices.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

DOE OSTI2020

Family of Robust and Strongly Luminescent CuI-Based Hybrid Networks Made of Ionic and Dative Bonds

The CuI-derived inorganic–organic hybrid compounds are considered as promising phosphors for the lighting industry. Herein, exploiting N-monoalkylated hexaminium salts, [R-HMTA]X (R = Me, Et, Pr, and propargyl; X = Cl and I), as multibridging ligands, we have designed and synthesized a unique class of one-dimensional and two-dimensional hybrid CuI-materials. The reactions of these salts with CuI give rise to All-in-One (AIO) type compounds combining ionic and dative bonds between inorganic and organic components. The latter is formed by structurally unique inorganic [Cu x I y ] (y–x)– clusters, chains, or sheets interconnected through [R-HMTA] + cations via multiple Cu–N bonds. The so-designed compounds at ambient temperature exhibit tunable luminescence spanning from deep blue to red color (λ em = 430–625 nm) with microsecond lifetimes and the quantum efficiency of up to 78%. Remarkably, the AIO materials feature nontrivial excitation- (ED) and temperature-dependent (TD) luminescence, allowing their emission color to be finely adjusted from deep blue to red through changing the excitation wavelength and/or temperature. Based on the TD emission spectroscopy and theoretical calculations, a possible mechanism of the luminescence has been proposed. In conclusion, the very interesting luminescence characteristics coupled with good thermal and photostability render these AIO hybrid materials possible candidates for applications in energy-efficient lighting devices.

36 MATERIALS SCIENCE↗