Engineering topics

Chen, Jiale

Publications and source records attributed to Chen, Jiale.

3 records

DOE OSTI2022

Estimation of China Fusion Engineering Test Reactor performance and burning fraction in different pellet fueling scenarios by a multi-species radial transport model

Tritium self-sufficiency in future deuterium–tritium fusion reactors is a crucial challenge. As an engineering test reactor, the China Fusion Engineering Test Reactor requires a burning fraction of 3% for the goal to test the accessibility to the future fusion plant. To self-consistently simulate burning plasmas with profile changes in pellet injection scenarios and to estimate the corresponding burning fraction, a one-dimensional multi-species radial transport model is developed in the BOUT++ framework. Here several pellet-fueling scenarios are then tested in the model. The results show that the increased fueling depth improves the burning fraction by particle confinement improvement and fusion power increase. Nevertheless, by increasing the depth, the pellet cooling-down may significantly lower the temperature in the core region. Taking the density perturbation into consideration, the reasonable parameters of the fueling scenario in these simulations are estimated as pellet radius ${r}_{{\rm{p}}}=3\,{\rm{mm}},$ injection rate $=\,4\,\mathrm{Hz},$ and pellet injection velocity $=\,1000\mbox{-}2000\,{\rm{m}}\,{{\rm{s}}}^{-1}$ without drift or $450\,{\rm{m}}\,{{\rm{s}}}^{-1}$ with high-field-side drift.

70 PLASMA PHYSICS AND FUSION TECHNOLOGY↗

DOE OSTI2022

EAST steady-state long pulse H-mode with core-edge integration for CFETR

Recent EAST experiment has successfully demonstrated long pulse steady-state high plasma performance scenario and core-edge integration since the last IAEA in 2018. A discharge with a duration over 60s with β P ~2.0, β N ~1.6, H 98y2 ~1.3 and internal transport barrier on electron temperature channel is obtained with multi-RF power heating and current drive. A higher β N (β N ~1.8, β p ~2.0, H 98y2 ~1.3, n e /n GW ~0.75) with a duration of 20s is achieved by using the modulated neutral beam and multi-RF power, where several normalized parameters are close or even higher than the phase III 1GW scenario of CFETR steady-state. High-Z impurity accumulation in the plasma core is well controlled in a low level by using the on-axis ECH. Modelling shows that the strong diffusion of TEM turbulence in the central region prevents tungsten impurity to accumulate. More recently, EAST has demonstrated compatible core-edge integration discharges in the high βp scenario: high confinement H 98y2 >1.2 with high β P ~2.5/β N ~2.0 and f bs ~50% is sustained with reduced divertor heat flux at high density n e /n GW ~0.7 and moderate q 95 ~6.7. By combining active impurity seeding through radiative divertor feedback control and strike point splitting induced by resonant perturbation coil, the peak heat flux is reduced by 20-30% on the ITER-like tungsten divertor, here a mixture of 50% neon and 50% D2 is applied.

70 PLASMA PHYSICS AND FUSION TECHNOLOGY↗

DOE OSTI2021

Edge localized mode characteristics and divertor heat flux during stationary and transient phase for CFETR hybrid scenario

The study of edge localized mode (ELM) behavior, stationary heat flux and transient heat flux during the ELM crash phase is performed for a China Fusion Engineering Test Reactor (CFETR) 1 GW hybrid mode operation scenario ($R$ = 7.2 m, ${B_{\text{T}}}$ = 6.5 T, ${I_{\text{p}}}$ = 13.78 MA). Modeling and simulation start with a scenario obtained by multi-code integrated modeling on the one modeling framework for integrated tasks framework. Linear stability and nonlinear simulations of ELM dynamics are carried out using the BOUT++ six-field reduced magnetohydrodynamic module, which show a much smaller ELM energy loss (Δ ELM ~ 0.13%) compared to that of a Type-I ELM. Parametric analysis of the weak linear growth rate and small ELM energy loss characteristics shed light on physics corresponding to a grassy ELM regime for CFETR 1 GW hybrid scenario. The transient heat flux on the divertor target during this small ELM phase is investigated using BOUT++. Here we found that upstream radial transport in the scrape-off-layer (SOL) induced by small ELMs is weak, which keeps it in the drift-dominated region. However, the heat flux width is still broadened to ${\lambda _{\text{q}}}$ = 4.64 mm by the increase of separatrix temperature during ELM nonlinear evolution. The impact of transient peak heat load and ELM energy fluence on tungsten melting and net erosion rate of divertor target is evaluated for the first-time using physics-based transport that connects the pedestal with the SOL. Energy fluence caused by a single ELM pulse is below the tungsten melting limit, while tungsten erosion would exceed the material requirements. We conclude that external mitigation methods, such as divertor detachment and advanced divertor geometry are likely needed for the steady state operation of CFETR.

70 PLASMA PHYSICS AND FUSION TECHNOLOGY↗