Search NASA⌕ Search

Engineering topics

Chen, Jingguang G.

Publications and source records attributed to Chen, Jingguang G..

At least 19 records
All sourcesNASA NTRSDOE OSTI
DOE OSTI2026

Circumventing thermodynamic limitations in converting carbon dioxide into carbon nanotubes via tandem catalysis

Carbon nanotubes (CNTs) are important materials for electronics and structural composites, but their production still relies on hydrocarbon-based chemical vapor deposition, an energy-intensive and fossil-dependent process, limited by rapid catalyst deactivation. Using CO2 as a carbon feedstock offers a sustainable route for CNT synthesis, yet direct CO2 conversion to CNTs is thermodynamically unfavorable and existing CO2-to-carbon pathways mainly yield amorphous or weakly graphitized solids. Here, we demonstrate a tandem electrochemical–thermochemical (EC-TC) strategy that overcomes these limitations. CO2 is first electrochemically reduced to a tunable mixture of C2H4 and CO, which is directly fed into a thermochemical reactor and converted into CNTs with controllable morphology and high CNT-to-metal mass ratios (~200) over NiFe catalysts at 750 °C. In situ synchrotron-based characterization and density functional theory calculations reveal that CO dissociation and C2H4 decomposition on NiFe alloys cooperatively promote CNT nucleation and sustained growth. This EC-TC strategy establishes a modular route for converting CO2 into value-added carbon nanomaterials.

03 NATURAL GAS↗
DOE OSTI2026

Mitigating Hydrogen-Induced Degradation of Iridium Anodes in Proton Exchange Membrane Water Electrolyzers

One promising method for reducing precious metal usage in proton exchange membrane water electrolysis is lowering iridium (Ir) loading at the anode. However, low-loading Ir catalysts often suffer from poor stability under high current densities. In this study, hydrogen (H2) crossover from the cathode to the anode is identified as a key degradation pathway. Temperature-programmed reduction confirms the reduction of IrO2 at 80 °C in a hydrogen environment, highlighting the vulnerability of IrO2-based catalysts to H2 exposure. To mitigate this effect, palladium (Pd) is introduced as an anode additive, acting as an H2 oxidation catalyst and mitigating IrO2 reduction. This protective role is verified by inductively coupled plasma optical emission spectroscopy and in situ X-ray absorption spectroscopy, showing significantly suppressed Ir dissolution at 80 °C under H2 flow when an O-covered Pd surface is present at oxygen evolution reaction potentials. Results from the current study identify a new strategy in improving activity and durability of catalysts in electrolyzers.

58 GEOSCIENCES↗
DOE OSTI2024

Rationalizing Acidic Oxygen Evolution Reaction over IrO 2 : Essential Role of Hydronium Cation

Abstract The development of active, stable, and more affordable electrocatalysts for acidic oxygen evolution reaction (OER) is of great importance for the practical application of electrolyzers and the advancement of renewable energy conversion technologies. Currently, IrO 2 is the only catalyst with high stability and activity, but a high cost. Further optimization of the catalyst is limited by the lack of understanding of catalytic behaviors at the acid‐IrO 2 interface. Here, in strong interaction with the experiment, we develop an explicit model based on grand‐canonical density function theory (GC‐DFT) calculations to describe acidic OER over IrO 2 . Compared to the explicit models reported previously, hydronium cations (H 3 O + ) are introduced at the electrochemical interface in the current model. As a result, a variation in stable IrO 2 surface configuration under the OER operating condition from previously proposed complete *O‐coverage to a mixture coverage of *OH and *O is revealed, which is well supported by in situ Raman measurements. In addition, the accuracy of predicted overpotential is increased in comparison with the experimentally measured. More importantly, an alteration of the potential limiting step from previously identified *O→*OOH to *OH→*O is observed, which opens new opportunities to advance the IrO 2 ‐based catalysts for acidic OER.

Mou, Tianyou↗
DOE OSTI2024

Influence of support on Rh-Co bimetallic catalysts for ethylene hydroformylation

Bimetallic Rh- and Co-based catalysts are promising materials for the heterogenous ethylene hydroformylation reaction. Here, in this study, the influence of a mesoporous silica (SBA-15) support on Rh and Co bimetallic interactions was investigated through a comparison with silica gel and alumina supports. The bimetallic catalyst supported on mesoporous silica (RhCo 3 /SBA-15) showed the best C 3 oxygenate yield among the three bimetallic catalysts. In-situ vibrational studies suggested moderate binding of the gem-dicarbonyl and Rh(CO)(C 2 H 4 ) intermediates due to this bimetallic interaction that led to improved hydroformylation performance. Kinetic studies revealed a lower hydroformylation barrier for the bimetallic compared to a Rh monometallic catalyst, and in-situ X-ray absorption spectroscopy investigations showed clear Rh-Co alloy formation on RhCo 3 /SBA-15. The bimetallic enhancement effect from the interaction with the mesoporous silica support shown here can be further optimized to design olefin hydroformylation catalysts.

58 GEOSCIENCES↗
DOE OSTI2024

Confining platinum clusters in indium-modified ZSM-5 zeolite to promote propane dehydrogenation

Designing highly active and stable catalytic sites is often challenging due to the complex synthesis procedure and the agglomeration of active sites during high-temperature reactions. Here, we report a facile two-step method to synthesize Pt clusters confined by In-modified ZSM-5 zeolite. In-situ characterization confirms that In is located at the extra-framework position of ZSM-5 as In + , and the Pt clusters are stabilized by the In-ZSM-5 zeolite. The resulting Pt clusters confined in In-ZSM-5 show excellent propane conversion, propylene selectivity, and catalytic stability, outperforming monometallic Pt, In, and bimetallic PtIn alloys. The incorporation of In + in ZSM-5 neutralizes Brønsted acid sites to inhibit side reactions, as well as tunes the electronic properties of Pt clusters to facilitate propane activation and propylene desorption. The strategy of combining precious metal clusters with metal cation-exchanged zeolites opens the avenue to develop stable heterogeneous catalysts for other reaction systems.

58 GEOSCIENCES↗
DOE OSTI2024

Rationalizing Acidic Oxygen Evolution Reaction over IrO 2 : Essential Role of Hydronium Cation

The development of active, stable, and more affordable electrocatalysts for acidic oxygen evolution reaction (OER) is of great importance for the practical application of electrolyzers and the advancement of renewable energy conversion technologies. Currently, IrO 2 is the only catalyst with high stability and activity, but a high cost. Further optimization of the catalyst is limited by the lack of understanding of catalytic behaviors at the acid-IrO 2 interface. Here, in strong interaction with the experiment, we develop an explicit model based on grand-canonical density function theory (GC-DFT) calculations to describe acidic OER over IrO 2 . Compared to the explicit models reported previously, hydronium cations (H 3 O + ) are introduced at the electrochemical interface in the current model. As a result, a variation in stable IrO 2 surface configuration under the OER operating condition from previously proposed complete *O-coverage to a mixture coverage of *OH and *O is revealed, which is well supported by in situ Raman measurements. In addition, the accuracy of predicted overpotential is increased in comparison with the experimentally measured. More importantly, in this study, an alteration of the potential limiting step from previously identified *O→*OOH to *OH→*O is observed, which opens new opportunities to advance the IrO 2 -based catalysts for acidic OER.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2024

Using ethanol and isopropanol as biomass model compounds for understanding bond scission mechanisms over Cu/Mo 2 N catalysts

The conversion of biomass compounds into fuels and chemicals is an important step towards a more sustainable future. This work combines results from model surfaces and powder catalysts to demonstrate Cu-modified mo- lybdenum nitride (Cu/Mo 2 N) as a selective catalyst for dehydrogenation of the biomass model compounds, ethanol and isopropanol. Results from model surfaces showed that while Mo2N led to unselective decomposition via both dehydrogenation and dehydration, the addition of Cu increased the dehydrogenation activity and selectivity. DFT calculations showed how Cu influenced the structures of active sites, adsorbate interactions, and thus the product selectivity. Batch reactor studies on corresponding powder catalysts confirmed the trend that Cu modification increased dehydrogenation activity, and in situ X-ray absorption spectroscopy elucidated the Cu oxidation state under reaction conditions. Further, this work demonstrates a strategy for promoting dehydrogenation over Mo 2 N-based catalysts, as well as the feasibility of using model surfaces to guide the design of industrially relevant catalysts.

09 BIOMASS FUELS↗
DOE OSTI2024

Oxide-Encapsulated Ruthenium Oxide Catalysts for Selective Oxygen Evolution in Unbuffered pH-Neutral Seawater

Direct seawater electrolysis is a promising approach to producing green hydrogen in water-scarce environments using renewable energy. However, the undesirable chlorine evolution reaction and hypochlorite evolution reaction compete with the desired oxygen evolution reaction (OER) at the anode electrocatalyst. This issue is most pronounced in unbuffered pH-neutral solutions due to local acidification resulting from the OER. To overcome this challenge, this study provides a comprehensive evaluation of the use of silicon oxide (SiO x ) and titanium oxide (TiO x ) nanoscale overlayers coated on metallic ruthenium (Ru) and ruthenium oxide (RuO x ) thin film electrodes and their ability to block chloride ions from reaching active sites during operation in an unbuffered 0.6 M NaCl electrolyte. Using a combination of (electro)analytical techniques, encapsulated RuO x anodes are shown to effectively suppress Cl - transport to buried catalyst active sites while allowing for the desired OER to occur, leading to increases in OER faradaic efficiency at moderate overpotentials. Evidence for the ability of SiO x overlayers to block Cl - ions from reaching the active buried interface was obtained by monitoring the ν(O-H) stretching mode of OH adsorbates using in situ Raman spectroscopy. Here, this study also reports trade-offs between the activity, selectivity, and stability of bare and encapsulated Ru and RuO x electrocatalysts, finding that the magnitude of these trade-offs strongly depends on the complex interplay between electrode architecture, material properties, and catalytic performance, especially in unbuffered pH-neutral seawater.

58 GEOSCIENCES↗
DOE OSTI2024

Theoretical Prediction and Experimental Verification of IrO x Supported on Titanium Nitride for Acidic Oxygen Evolution Reaction

Reducing iridium (Ir) catalyst loading for acidic oxygen evolution reaction (OER) is a critical strategy for large-scale hydrogen production via proton exchange membrane (PEM) water electrolysis. However, simultaneously achieving high activity, long-term stability, and reduced material cost remains challenging. To address this challenge, we develop a frame-work by combining density functional theory (DFT) prediction using model surfaces and proof-of-concept experimental ver-ification using thin films and nanoparticles. DFT results predict that oxidized Ir monolayers over titanium nitride (IrO x /TiN) should display higher OER activity than IrO x while reducing Ir loading. Further, this prediction is verified by depositing Ir monolayers over TiN thin films via physical vapor deposition. The promising thin film results are then extended to commercially viable powder IrO x /TiN catalysts, which demonstrate a lower overpotential and higher mass activity than commercial IrO 2 , and a long-term stability of 250 hours to maintain a current density of 10 mA cm -2 . The superior OER performance of IrO x /TiN is further confirmed using proton exchange membrane water electrolyzer (PEMWE), which shows a lower cell voltage than commercial IrO 2 to achieve a current density of 1 A cm -2 . Both DFT and in situ X-ray absorption spectroscopy reveal that the high OER performance of IrO x /TiN strongly depends on the IrO x - TiN interaction via direct Ir-Ti bonding. This study highlights the importance of close interaction between theoretical prediction based on mechanistic understanding and experimental verification based on thin film model catalysts to facilitate the development of more practical powder IrO x /TiN catalysts with high activity and stability for acidic OER.

08 HYDROGEN↗
DOE OSTI2024

Tandem Electrocatalytic–Thermocatalytic Conversion of CO 2 to Aromatic Hydrocarbons

The reaction of CO 2 with H 2 O to produce aromatic hydrocarbons (benzene, toluene, ethylbenzene, and xylene isomers) (BTEX) represents a promising pathway for converting CO 2 to value-added liquid products. However, this reaction cannot be achieved in a single electrochemical or thermochemical process. This work utilizes tandem electrochemical-thermochemical reactors as a new paradigm by starting with CO 2 and H 2 O as the feed in a membrane electrode assembly (MEA) to produce C 2 H 4 , which subsequently undergoes thermochemical aromatization using a Gallium- and Phosphorus-modified zeolite ZSM-5 catalyst (Ga/ZSM-5/P) at ambient pressure to produce BTEX. The current study also demonstrates the potential advantage of the tandem strategy in mitigating negative effects of water by testing the tandem reactor system under different hydration conditions and by performing in-situ X-ray diffraction (XRD) and X-ray absorption (XAS) characterization of the aromatization catalysts. Finally, these results highlight the advantage of using the tandem process with the use of a water trap before the thermochemical reactor.

10 SYNTHETIC FUELS↗
DOE OSTI2024

Converting Carbon Dioxide into Carbon Nanotubes by Reacting with Ethane

In this study, the urgency to mitigate environmental impacts from anthropogenic CO 2 emissions has propelled extensive research efforts on CO 2 reduction. The current work reports a novel approach involving transforming CO 2 and ethane into carbon nanotubes (CNTs) using earth-abundant metals (Fe, Co, Ni) at 750 °C. This route facilitates long-term carbon storage via generating high-value CNTs and produces valuable syngas with adjustable H 2 /CO ratios as byproducts. Without CO 2 , direct pyrolysis of ethane undergoes rapid deactivation. The participation of CO 2 not only enhances the durability of the catalyst, but also contributes about 30 % of the CNTs production, presenting a viable solution to CO 2 challenges. The CNT morphology depends on the catalyst used. Co- and Ni-based catalysts produce CNT with a 20 nm diameter and micrometer length, whereas Fe-based catalysts yield bamboo-like structures. This work represents a pioneering effort in utilizing CO 2 and ethane for CNT production with potential environmental and economic benefits.

09 BIOMASS FUELS↗
DOE OSTI2024

Construction of a Pt‐CeO x Interface for the Electrocatalytic Hydrogen Evolution Reaction

Abstract The creation of metal‐metal oxide interfaces is an important approach to fine‐tuning catalyst properties through strong interfacial interactions. This article presents the work on developing interfaces between Pt and CeO x that improve Pt surface energetics for the hydrogen evolution reaction (HER) within an alkaline electrolyte. The Pt‐CeO x interfaces are formed by depositing size‐controlled Pt nanoparticles onto a carbon support already coated with ultrathin CeO x nanosheets. This interface structure facilitates substantial electron transfer from Pt to CeO x , resulting in decreased hydrogen binding energies on Pt surfaces, and water dissociation for the HER, as predicted by the density functional theory (DFT) calculations. Electrochemical testing indicates that both Pt specific activity and mass activity are improved by a factor of 2 to 3 following the formation of Pt‐CeO x interfaces. This study underscores the significance and potential of harnessing robust interfacial effects to enhance electrocatalytic reactions.

25 ENERGY STORAGE↗
DOE OSTI2024

Chloride and Hydride Transfer as Keys to Catalytic Upcycling of Polyethylene into Liquid Alkanes

Abstract Transforming polyolefin waste into liquid alkanes through tandem cracking‐alkylation reactions catalyzed by Lewis‐acid chlorides offers an efficient route for single‐step plastic upcycling. Lewis acids in dichloromethane establish a polar environment that stabilizes carbenium ion intermediates and catalyzes hydride transfer, enabling breaking of polyethylene C−C bonds and forming C−C bonds in alkylation. Here, we show that efficient and selective deconstruction of low‐density polyethylene (LDPE) to liquid alkanes is achieved with anhydrous aluminum chloride (AlCl 3 ) and gallium chloride (GaCl 3 ). Already at 60 °C, complete LDPE conversion was achieved, while maintaining the selectivity for gasoline‐range liquid alkanes over 70 %. AlCl 3 showed an exceptional conversion rate of 5000 , surpassing other Lewis acid catalysts by two orders of magnitude. Through kinetic and mechanistic studies, we show that the rates of LDPE conversion do not correlate directly with the intrinsic strength of the Lewis acids or steric constraints that may limit the polymer to access the Lewis acid sites. Instead, the rates for the tandem processes of cracking and alkylation are primarily governed by the rates of initiation of carbenium ions and the subsequent intermolecular hydride transfer. Both jointly control the relative rates of cracking and alkylation, thereby determining the overall conversion and selectivity.

Zhang, Wei↗
DOE OSTI2024

Chloride and Hydride Transfer as Keys to Catalytic Upcycling of Polyethylene into Liquid Alkanes

Abstract Transforming polyolefin waste into liquid alkanes through tandem cracking‐alkylation reactions catalyzed by Lewis‐acid chlorides offers an efficient route for single‐step plastic upcycling. Lewis acids in dichloromethane establish a polar environment that stabilizes carbenium ion intermediates and catalyzes hydride transfer, enabling breaking of polyethylene C−C bonds and forming C−C bonds in alkylation. Here, we show that efficient and selective deconstruction of low‐density polyethylene (LDPE) to liquid alkanes is achieved with anhydrous aluminum chloride (AlCl 3 ) and gallium chloride (GaCl 3 ). Already at 60 °C, complete LDPE conversion was achieved, while maintaining the selectivity for gasoline‐range liquid alkanes over 70 %. AlCl 3 showed an exceptional conversion rate of 5000 , surpassing other Lewis acid catalysts by two orders of magnitude. Through kinetic and mechanistic studies, we show that the rates of LDPE conversion do not correlate directly with the intrinsic strength of the Lewis acids or steric constraints that may limit the polymer to access the Lewis acid sites. Instead, the rates for the tandem processes of cracking and alkylation are primarily governed by the rates of initiation of carbenium ions and the subsequent intermolecular hydride transfer. Both jointly control the relative rates of cracking and alkylation, thereby determining the overall conversion and selectivity.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2024

3D printing synthesis of catalysts

The catalyst industry generates approximately $20 billion every year globally and plays a major role in the energy production sector. Traditional industrial catalysts (e.g., pellets) typically have mass and heat transfer limitations, and cause a pressure drop in continuous-flow reactors, lowering the efficiency of the catalytic processes. 3D printing technology has evolved rapidly over the past decade, and the 3D printing of catalysts with desired geometries can address many of the above-stated challenges with traditional catalysts. However, challenges remain to be addressed and opportunities remain to be explored before the full potential in the design and 3D printing of novel catalysts can be realized. Herein this article reviews the recent development in the 3D printing of catalysts. It summarizes the 3D printing design, dimension, property, and performance of 3D printed catalysts. The applications of 3D printed catalysts, such as reforming, wastewater treatment, and CO 2 capture and removal, are discussed, with a techno-economic analysis and life cycle analysis. Future research directions and opportunities for 3D printing of catalysts are also highlighted.

25 ENERGY STORAGE↗
DOE OSTI2024

Recommendations to standardize reporting, execution, and interpretation of X-ray Absorption Spectroscopy measurements

In July of 2022, a National Science Foundation (NSF)- and US Department of Energy (DOE)-sponsored workshop was held on the topic of rigor and reproducibility (R&R) in thermal, heterogeneous catalysis. As a result of the workshop, a report has been published entitled "Addressing Rigor and Reproducibility in Thermal, Heterogeneous Catalysis"[1]. This manuscript summarizes one section of the report: "Recommendations for catalyst characterization by X-ray absorption spectroscopy". Here, the section focuses exclusively on X-ray absorption spectroscopy (XAS) and is narrowly focused on recommendations for the collection and interpretation of XAS data for routine experiments. Therefore, one should not expect a detailed guide for each different experiment that one may perform nor are the recommendations designed to be overly prescriptive. However, the report is designed to draw attention to key pitfalls and common problems in the collection, reporting, analysis and interpretation of XAS studies.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗