Search NASA⌕ Search

Engineering topics

Chen, Long -Qing

Publications and source records attributed to Chen, Long -Qing.

15 records
All sourcesNASA NTRSDOE OSTI
DOE OSTI2019

Periodicity-Doubling Cascades: Direct Observation in Ferroelastic Materials

Very sensitive responses to external forces are found near phase transitions. However, phase transition dynamics and pre-equilibrium phenomena are difficult to detect and control. We have directly observed that the equilibrium domain structure following a phase transition in BaTiO 3 , a ferroelectric and ferroelastic material, is attained by halving of the domain periodicity, sequentially and multiple times. The process is reversible, displaying periodicity doubling as temperature is increased. Here, this observation is backed theoretically and can explain the fingerprints of domain period multiplicity observed in other systems, strongly suggesting this as a general model for pattern formation during phase transitions in ferroelastic materials.

36 MATERIALS SCIENCE↗
DOE OSTI2018

Control of Epitaxial BaFe 2 As 2 Atomic Configurations with Substrate Surface Terminations

Atomic layer controlled growth of epitaxial thin films of unconventional superconductors opens the opportunity to discover novel high temperature superconductors. For instance, the interfacial atomic configurations may play an important role in superconducting behavior of monolayer FeSe on SrTiO 3 and other Fe-based superconducting thin films. Here, we demonstrate a selective control of the atomic configurations in Co-doped BaFe 2 As 2 epitaxial thin films and its strong influence on superconducting transition temperatures by manipulating surface termination of (001) SrTiO 3 substrates. In a combination of first-principles calculations and high-resolution scanning transmission electron microscopy imaging, we show that Co-doped BaFe 2 As 2 on TiO 2 -terminated SrTiO 3 is a tetragonal structure with an atomically sharp interface and with an initial Ba layer. In contrast, Co-doped BaFe 2 As 2 on SrO-terminated SrTiO 3 has a monoclinic distortion and a BaFeO 3-x initial layer. Furthermore, the superconducting transition temperature of Co-doped BaFe 2 As 2 ultrathin films on TiO 2 -terminated SrTiO 3 is significantly higher than that on SrO-terminated SrTiO 3 , which we attribute to shaper interfaces with no lattice distortions. As a result, this study allows the design of the interfacial atomic configurations and the effects of the interface on superconductivity in Fe-based superconductors.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2018

Role of Reversible Phase Transformation for Strong Piezoelectric Performance at the Morphotropic Phase Boundary

A functional material with coexisting energetically equivalent phases often exhibits extraordinary properties such as piezoelectricity, ferromagnetism, and ferroelasticity, which is simultaneously accompanied by field-driven reversible phase transformation. The study on the interplay between such phase transformation and the performance is of great importance. Here, we have experimentally revealed the important role of field-driven reversible phase transformation in achieving enhanced electromechanical properties using in situ high-energy synchrotron x-ray diffraction combined with 2D geometry scattering technology, which can establish a comprehensive picture of piezoelectric-related microstructural evolution. High-throughput experiments on various Pb/Bi-based perovskite piezoelectric systems suggest that reversible phase transformation can be triggered by an electric field at the morphotropic phase boundary and the piezoelectric performance is highly related to the tendency of electric-field-driven phase transformation. A strong tendency of phase transformation driven by an electric field generates peak piezoelectric response. Further, phase-field modeling reveals that the polarization alignment and the piezoelectric response can be much enhanced by the electric-field-driven phase transformation. In conclusion, the proposed mechanism will be helpful to design and optimize the new piezoelectrics, ferromagnetics, or other related functional materials.

36 MATERIALS SCIENCE↗
DOE OSTI2017

Unexpected significant increase in bulk conductivity of a dielectric arising from charge injection

Charge injection is a common phenomenon in heterostructures or devices containing metal-insulator interfaces under a voltage bias ranging from dielectric capacitors to electroluminescent and lasing devices. It is generally believed that charge injection only significantly increases the conductivity near the interfacial region or in capacitors with very thin dielectric layers. In this work, the impact of charge injection on bulk conductivity of a 0.5 mm thick Fe-doped SrTiO 3 single crystal is investigated with a combination of experimental impedance measurements and computational modelling. As a result, it is found that the interfacial charge injection may increase the predicted bulk conductivity of a dielectric by more than one order of magnitude as a consequence of Schottky barrier height lowering.

36 MATERIALS SCIENCE↗
DOE OSTI2017

Thermodynamic potential and phase diagram for multiferroic bismuth ferrite (BiFeO 3 )

Here, we construct a Landau–Ginzburg thermodynamic potential, and the corresponding phase diagram for pristine and slightly doped bismuth ferrite, a ferroelectric antiferromagnet at room temperature. The potential is developed based on new X-ray and neutron diffraction experiments complementing available data. We demonstrate that a strong biquadratic antiferrodistortive-type coupling is the key to a quantitative description of Bi 1–x La x FeO 3 multiferroic phase diagram including the temperature stability of the antiferromagnetic, ferroelectric, and antiferrodistortive phases, as well as for the prediction of novel intermediate structural phases. Furthermore, we show that “rotomagnetic” antiferrodistortive–antiferromagnetic coupling is very important to describe the ferroelectric polarization and antiferrodistortive tilt behavior in the R3c phase of BiFeO 3 . The Landau–Ginzburg thermodynamic potential is able to describe the sequence of serial and trigger-type phase transitions, the temperature-dependent behavior of the order parameters, and the corresponding susceptibilities to external stimuli. It can also be employed to predict the corresponding ferroelectric and antiferrodistortive properties of Bi 1–x La x FeO 3 thin films and nanoparticles by incorporating the gradient and surface energy terms that are strongly dependent on the shape, size, and preparation method.

36 MATERIALS SCIENCE↗
DOE OSTI2016

Role of scaffold network in controlling strain and functionalities of nanocomposite films

One novel approach to manipulating functionalities in correlated complex oxides is strain. However, significant epitaxial strain can only be achieved in ultrathin layers. We show that, under direct lattice matching framework, large and uniform vertical strain up to 2% can be achieved to significantly modify the magnetic anisotropy, magnetism, and magnetotransport properties in heteroepitaxial nanoscaffold films, over a few hundred nanometers in thickness. Comprehensive designing principles of large vertical strain have been proposed. Phase-field simulations not only reveal the strain distribution but also suggest that the ultimate strain is related to the vertical interfacial area and interfacial dislocation density. Moreover, by changing the nanoscaffold density and dimension, the strain and the magnetic properties can be tuned. The established correlation among the vertical interface—strain—properties in nanoscaffold films can consequently be used to tune other functionalities in a broad range of complex oxide films far beyond critical thickness.

77 NANOSCIENCE AND NANOTECHNOLOGY↗
DOE OSTI2016

First-principles calculations of lattice dynamics and thermal properties of polar solids

Although the theory of lattice dynamics was established six decades ago, its accurate implementation for polar solids using the direct (or supercell, small displacement, frozen phonon) approach within the framework of density-function-theory-based first-principles calculations had been a challenge until recently. It arises from the fact that the vibration-induced polarization breaks the lattice periodicity, whereas periodic boundary conditions are required by typical first-principles calculations, leading to an artificial macroscopic electric field. In conclusion, the article reviews a mixed-space approach to treating the interactions between lattice vibration and polarization, its applications to accurately predicting the phonon and associated thermal properties, and its implementations in a number of existing phonon codes.

36 MATERIALS SCIENCE↗
DOE OSTI2016

Tunable thermal conductivity via domain structure engineering in ferroelectric thin films: A phase-field simulation

Effective thermal conductivity as a function of domain structure is studied by solving the heat conduction equation using a spectral iterative perturbation algorithm in materials with inhomogeneous thermal conductivity distribution. Using this proposed algorithm, the experimentally measured effective thermal conductivities of domain-engineered {001} p- BiFeO 3 thin films are quantitatively reproduced. In conjunction with two other testing examples, this proposed algorithm is proven to be an efficient tool for interpreting the relationship between the effective thermal conductivity and micro-/domain-structures. By combining this algorithm with the phase-field model of ferroelectric thin films, the effective thermal conductivity for PbZr 1-x Ti x O 3 films under different composition, thickness, strain, and working conditions is predicted. It is shown that the chemical composition, misfit strain, film thickness, film orientation, and a Piezoresponse Force Microscopy tip can be used to engineer the domain structures and tune the effective thermal conductivity. Furthermore, we expect our findings will stimulate future theoretical, experimental and engineering efforts on developing devices based on the tunable effective thermal conductivity in ferroelectric nanostructures.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗
DOE OSTI2016

Connecting the irreversible capacity loss in Li-ion batteries with the electronic insulating properties of solid electrolyte interphase (SEI) components.

The formation and continuous growth of a solid electrolyte interphase (SEI) layer are responsible for the irreversible capacity loss of batteries in the initial and subsequent cycles, respectively. In this article, the electron tunneling barriers from Li metal through three insulating SEI components, namely Li 2 CO 3 , LiF and Li 3 PO 4 , are computed by density function theory (DFT) approaches. Based on electron tunneling theory, it is estimated that sufficient to block electron tunneling. It is also found that the band gap decreases under tension while the work function remains the same, and thus the tunneling barrier decreases under tension and increases under compression. A new parameter, η, characterizing the average distances between anions, is proposed to unify the variation of band gap with strain under different loading conditions into a single linear function of η. An analytical model based on the tunneling results is developed to connect the irreversible capacity loss, due to the Li ions consumed in forming these SEI component layers on the surface of negative electrodes. As a result, the agreement between the model predictions and experimental results suggests that only the initial irreversible capacity loss is due to the self-limiting electron tunneling property of the SEI.

25 ENERGY STORAGE↗
DOE OSTI2016

Ferroelastic switching in a layered-perovskite thin film

Here, a controllable ferroelastic switching in ferroelectric/multiferroic oxides is highly desirable due to the non-volatile strain and possible coupling between lattice and other order parameter in heterostructures. However, a substrate clamping usually inhibits their elastic deformation in thin films without micro/nano-patterned structure so that the integration of the non-volatile strain with thin film devices is challenging. Here, we report that reversible in-plane elastic switching with a non-volatile strain of approximately 0.4% can be achieved in layered-perovskite Bi 2 WO 6 thin films, where the ferroelectric polarization rotates by 90° within four in-plane preferred orientations. Phase-field simulation indicates that the energy barrier of ferroelastic switching in orthorhombic Bi 2 WO 6 film is ten times lower than the one in PbTiO 3 films, revealing the origin of the switching with negligible substrate constraint. The reversible control of the in-plane strain in this layered-perovskite thin film demonstrates a new pathway to integrate mechanical deformation with nanoscale electronic and/or magnetoelectronic applications.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗
DOE OSTI2016

Local probing of ferroelectric and ferroelastic switching through stress-mediated piezoelectric spectroscopy

The role of local strains is fundamental to the large effective piezoelectric and ferroelectric response of thin films. Therefore a method to investigate local strain-induced phenomena is imperative. Here, pressure induced domain reorganization is reported in lead zirconate titanate films with composition near the morphotropic phase boundary. An approach is thus demonstrated to simultaneously study the role of applied mechanical pressure on multiple local properties of the film. In particular, the modification of hysteresis loops collected at different tip pressures is consistent with first mostly ferroelastic and then ferroelectric dominated reorientation of domains under increasing applied pressure. The pressure induced domain writing is also investigated through phase field simulations where the applied pressure is generally found to increase the in-plane polarization of the domains with respect to the out-of-plane component, corroborating the experimental observations. The approach developed here has the potential to explore other hysteretic phenomena and phase transitions in a spatially resolved manner with varying local pressure.

36 MATERIALS SCIENCE↗
DOE OSTI2015

Influence of interfacial coherency on ferroelectric switching of superlattice BaTiO 3 /SrTiO 3

Switching behavior of (BaTiO 3 ) 8 /(SrTiO 3 ) 4 heterostructure superlattice grown on SrTiO 3 substrate was studied by employing the phase field method. To investigate the constraint effect of the substrate on switching, three types of superlattice/substrate interface mechanical relaxation conditions were considered, i.e. the fully ommensurate, partially relaxed and fully relaxed. Our simulation results demonstrated that the hysteresis loops under the three types of constraints were very different. The interfacial coherency affects dramatically the coercivity and remanence of the superlattice films. The mechanism of the hysteresis loop varying with interfacial coherency was analyzed by the ferroelectric domain configuration and its evolution during the switching process. Finally, the hysteresis loop of fully relaxed superlattice shows application potential on ferroelectric energy storage materials.

36 MATERIALS SCIENCE↗
DOE OSTI2014

Mesoscale Modeling Framework Design: Subcontract Report

This subcontract is aimed at developing the mesoscale computational capability to help ensure success of the project “Multiscale Capability for Exploring Transport Phenomena in Battery” at the Lawrence Livermore National Laboratory (LLNL). We develop an efficient computer code that implements the smoothed boundary method for simulating charge transport and coupled microstructure evolution in battery electrode architectures.

25 ENERGY STORAGE↗