Ab initio study of quantum oscillations in altermagnetic and nonmagnetic phases of RuO 2
Not Available
Huang, Yingliang↗
Engineering topics
Chen, Rong
Publications and source records attributed to Chen, Rong.
Lepidopteran mevalonate pathway optimization in Escherichia coli efficiently produces isoprenol analogs for next-generation biofuels
Terpenes constitute the largest class of natural products with over 55,000 compounds with versatile applications including drugs and biofuels. Introducing structural modifications to terpenes through metabolic engineering is an efficient and sustainable way to improve their properties. Here, in this study, we report the optimization of the lepidopteran mevalonate (LMVA) pathway towards the efficient production of isopentenyl pyrophosphate (IPP) analogs as terpene precursors. First, we linked the LMVA pathway to NudB, a promiscuous phosphatase, resulting in the production of the six-carbon analog of 3-methyl-3-buten-1-ol (isoprenol), 3-ethyl-3-buten-1-ol (C6-isoprenol). Using C6-isoprenol as the final product, we then engineered the LMVA pathway by redirecting its upstream portion from a thiolase-dependent pathway to a beta-oxidation pathway. The beta-oxidation LMVA pathway transforms valeric acid, a platform chemical that can be produced from biomass, into C6-isoprenol at a titer of 110.3 mg/L, improved from 5.5 mg/L by the thiolase LMVA pathway, which used propionic acid as a feedstock. Knockout of the E. coli endogenous thiolase genes further improved the C6-isoprenol titer to 390 mg/L, implying efficient production of homo isopentenyl pyrophosphate (HIPP). The beta-oxidation LMVA-NudB pathway also converts butanoic acid and hexanoic acid into isoprenol and isoprenol’s seven-carbon analog, 3-propyl-3-buten-1-ol (C7-isoprenol), respectively, suggesting the beta-oxidation LMVA pathway produces IPP and C7-IPP from the corresponding fatty acids. Fuel property tests revealed the longer chain isoprenol analogs have lower water solubilities, similar or higher energy densities, and comparable research octane number (RON) boosting effects to isopentenols. This work not only optimizes the LMVA pathway, setting the basis for homoterpene biosynthesis to expand terpene chemical space, but provides an efficient pathway to produce isoprenol analogs as next-generation biofuels from sustainable feedstocks.
59 BASIC BIOLOGICAL SCIENCES↗
Electrochemically Triggered Chain Reactions for the Conversion of Furan Derivatives
Abstract We report an electrochemical method for coupling biomass‐derived C5/C6 compounds to value‐added fuel precursors. Using only 2 % of equivalent charges, 2‐methylfuran (2‐MF) was oxidized to yield a cation radical, which readily reacted with 3‐hexene‐2,5‐dione, a derivate of 2,5‐dimethylfuran, to produce 3‐(5‐methylfuran‐2‐yl)hexane‐2,5‐dione. The product was converted to 4‐ethylnonane (a component of biodiesel/jet fuel) in a single step in excellent yield. Importantly, the reaction was not sensitive to oxygen, and a trace amount of water was found to promote the reaction. Detailed mechanistic studies confirmed the proposed reaction pathways. Key to the mechanism is the radical generation that is enabled by electrochemistry. The radical is regenerated at the end of a reaction cycle to ensure chain propagation for an average of ca. 47 times, resulting in an apparent Faradaic efficiency of 4700 %.
Chen, Rong↗
Electrochemically Triggered Chain Reactions for the Conversion of Furan Derivatives
Not provided.
Chemistry↗
Epidemiological surveillance of common respiratory viruses in patients with suspected COVID-19 in Southwest China
Abstract Background The outbreak of coronavirus disease 2019 (COVID-19) caused by the severe acute respiratory syndrome coronavirus 2 (SARS-CoV-2) is currently the peak season of common respiratory viral infections. However, the clinical symptoms of most SARS-CoV-2 infected patients are not significantly different from those of common respiratory viral infections. Therefore, knowing the epidemiological patterns of common respiratory viruses may be valuable to improve the diagnostic and therapeutic efficacy of patients with suspected COVID-19, especially in Southwest China (a mild epidemic area). Methods A total of 2188 patients with clinically suspected of COVID-19 in Southwest China were recruited from January 21 to February 29, 2020. Nasopharyngeal swabs, throat swabs and sputum specimens were collected to detect SARS-CoV-2 by using real-time reverse transcription-polymerase chain reaction (RT-PCR) and other 12 viruses via PCR fragment analysis combined with capillary electrophoresis. Clinical characteristics and laboratory test findings were acquired from electronic medical records. All data were analyzed to unravel the epidemiological patterns. Results Only 1.1% (24/2188) patients with suspected COVID-19 were eventually confirmed to have SARS-CoV-2 infection, and the most frequently observed symptoms were fever (75.0%, 18/24) and cough (20.8%, 5/24). The overall detection rate of other respiratory pathogens was 10.3% (226/2188). Among them, human rhinovirus (3.2%, 71/2188), human parainfluenza viruses (1.6%, 35/2188), influenza B virus (1.2%, 26/2188) and mycoplasma pneumonia (1.2%, 26/2188) were the predominantly detected pathogens in this study. Moreover, the co-infection was observed in 22 specimens. Notably, one COVID-19 case had a coexisting infection with human parainfluenza virus (4.2%, 1/24) and bocavirus was the most common virus tending to occur in co-infection with other respiratory pathogens. Conclusions This study reveals the epidemiological features of common respiratory viruses and their clinical impact during the ongoing outbreak of COVID-19 in a mild epidemic area. The findings highlight the importance of understanding the transmission patterns of the common respiratory virus in COVID-19 regions, which can provide information support for the development of appropriate treatment plans and health policies, while eliminating unnecessary fear and tension.
Si, Yanjun↗
Photoelectrochemical NADH Regeneration is Highly Sensitive to the Nature of Electrode Surface
(Photo)electrochemistry enables the synthesis of high-value fine chemicals and highly selective activation of molecules that are difficult to prepare using conventional chemical methods. In this study, light-driven NADH (reduced nicotinamide adenine dinucleotide) regeneration is achieved using a molecular Rh(III) mediator on Si photoelectrodes. This process is observed to be highly sensitive to the surface nature of Si photoelectrodes, exhibiting an overpotential reduction up to 600 mV on Si nanowires (SiNWs) as compared to planar Si. The use of a molecular mediator and SiNWs enables 100% selectivity toward NADH synthesis within a broad potential window. The origin of the striking difference is identified as the multifaceted nature of SiNWs.
37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
Surface chemistry and photoelectrochemistry—Case study on tantalum nitride
Solar water splitting promises a solution to challenges associated with the intermittent nature of solar energy. Of different implementations, photoelectrochemical water splitting, where one or more photoelectrodes harvest light and catalyze water splitting, represents a convenient platform to understand the governing principles of charge behaviors, especially at the light absorber|H 2 O interface. This Perspective recognizes and discusses the importance of the photoelectrode surface to solar water splitting performance. It presents discussions within the context of a prototypical water splitting material, Ta 3 N 5 , which has gained growing attention lately for its outstanding initial performance. Insights into the mechanisms by which Ta 3 N 5 functions are presented, followed by examples of recent efforts to circumvent the issues that Ta 3 N 5 decays rapidly under solar water splitting conditions. Our visions on the future directions of semiconductor-based solar water splitting will be presented at the end.
37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
A Nonparametric Bayesian Framework for Short-Term Wind Power Probabilistic Forecast
To improve the energy system resilience and economic efficiency, the wind power as a renewable energy starts to be deeply integrated into smart power grids. However, the wind power forecast uncertainty brings operational challenges. In order to provide a reliable guidance on operational decisions, in this paper, we propose a short-term wind power probabilistic forecast. Specifically, to model the rich dynamic behaviors of underlying physical wind power stochastic process occurring in various meteorological conditions, we first introduce an infinite Markov switching autoregressive model. This nonparametric time series model can capture the important properties in the real world data to improve the prediction accuracy. Then, given finite historical data, the posterior distribution of flexible forecast model can correctly quantify the model estimation uncertainty. Built on it, we develop the posterior predictive distribution to rigorously quantify the overall forecasting uncertainty accounting for both inherent stochastic uncertainty and model estimation error. Furthermore, the proposed approach can provide accurate and reliable short-term wind power probabilistic forecast, which can be used to support smart power grids real-time risk management.
17 WIND ENERGY↗
Processing and Characterization of Ag-Cu-Sn Brazing Alloy Prepared by a Mechanical Alloying Method
Mechanical alloying was used to prepare an Ag-Cu-Sn brazing alloy with the low amounts of intermetallic compounds. X-ray diffraction and differential scanning calorimetry were carried out to investigate the phase transformation of the as-milled samples. It seemed that the intermetallic compounds experienced the stage of synthesis-decomposition-resynthesis in the ball milling process. By controlling the ball milling time and tin contents, the solid solution phases of Ag (Cu, Sn) and Ag (Cu) were achieved in the 60Ag30Cu10Sn sample after milling for 40 h. Although the intermetallic compound will be generated during the brazing process, the improvement of their distributed morphology is beneficial for the good bonding interface of the joint with stainless steel substrate.
36 MATERIALS SCIENCE↗
Spatial atomic layer deposition of ZnO/TiO{sub 2} nanolaminates
Spatial atomic layer deposition (S-ALD) is a potential high-throughput manufacturing technique offering fast and large scale ultrathin films deposition. Here, an S-ALD system with modular injectors is introduced for fabricating binary oxides and their nanolaminates. By optimizing the deposition conditions, both ZnO and TiO{sub 2} films demonstrate linear growth and desired surface morphology. The as-deposited ZnO film has high carrier mobility, and the TiO{sub 2} film shows suitable optical transmittance and band gap. The ZnO/TiO{sub 2} nanolaminates are fabricated by alternating substrate movement between each S-ALD modular units of ZnO and TiO{sub 2}. The grazing incidence x-ray diffraction spectra of nanolaminates demonstrating the signature peaks are weaker for the same thickness nanolaminates with more bilayers, suggesting tuning nanolaminates from crystalline to amorphous. Optical transmittances of ZnO/TiO{sub 2} laminates are enhanced with the increase of the bilayers' number in the visible range. Refractive indices of nanolaminates increase with the thickness of each bilayer decreasing, which demonstrates the feasibility of obtaining desired refractive indices by controlling the bilayer number. The electronic properties, including mobility, carrier concentration, and conductivity, are also tunable with different bilayers.
42 ENGINEERING↗
Surface passivation of Fe{sub 3}O{sub 4} nanoparticles with Al{sub 2}O{sub 3} via atomic layer deposition in a rotating fluidized bed reactor
Iron(II,III) oxide (Fe{sub 3}O{sub 4}) nanoparticles have shown great promise in many magnetic-related applications such as magnetic resonance imaging, hyperthermia treatment, and targeted drug delivery. Nevertheless, these nanoparticles are vulnerable to oxidation and magnetization loss under ambient conditions, and passivation is usually required for practical applications. In this work, a home-built rotating fluidized bed (RFB) atomic layer deposition (ALD) reactor was employed to form dense and uniform nanoscale Al{sub 2}O{sub 3} passivation layers on Fe{sub 3}O{sub 4} nanoparticles. The RFB reactor facilitated the precursor diffusion in the particle bed and intensified the dynamic dismantling of soft agglomerates, exposing every surface reactive site to precursor gases. With the aid of in situ mass spectroscopy, it was found that a thicker fluidization bed formed by larger amount of particles increased the residence time of precursors. The prolonged residence time allowed more thorough interactions between the particle surfaces and the precursor gas, resulting in an improvement of the precursor utilization from 78% to nearly 100%, even under a high precursor feeding rate. Uniform passivation layers around the magnetic cores were demonstrated by both transmission electron microscopy and the statistical analysis of Al mass concentrations. Individual particles were coated instead of the soft agglomerates, as was validated by the specific surface area analysis and particle size distribution. The results of thermogravimetric analysis suggested that 5 nm-thick ultrathin Al{sub 2}O{sub 3} coatings could effectively protect the Fe{sub 3}O{sub 4} nanoparticles from oxidation. The x-ray diffraction patterns also showed that the magnetic core crystallinity of such passivated nanoparticles could be well preserved under accelerated oxidation conditions. The precise thickness control via ALD maintained the saturation magnetization at 66.7 emu/g with a 5 nm-thick Al{sub 2}O{sub 3} passivation layer. This good preservation of the magnetic properties with superior oxidation resistance will be beneficial for practical magnetic-based applications.
36 MATERIALS SCIENCE↗
Transition metal nitride coated with atomic layers of Pt as a low-cost, highly stable electrocatalyst for the oxygen reduction reaction
Here, the main challenges to the commercial viability of polymer electrolyte membrane fuel cells are (i) the high cost associated with using large amounts of Pt in fuel cell cathodes to compensate for the sluggish kinetics of the oxygen reduction reaction, (ii) catalyst degradation, and (iii) carbon-support corrosion. To address these obstacles, our group has focused on robust, carbon-free transition metal nitride materials with low Pt content that exhibit tunable physical and catalytic properties. Here, we report on the high performance of a novel catalyst with low Pt content, prepared by placing several layers of Pt atoms on nanoparticles of titanium nickel binary nitride. For the ORR, the catalyst exhibited a more than 400% and 200% increase in mass activity and specific activity, respectively, compared with the commercial Pt/C catalyst. It also showed excellent stability/durability, experiencing only a slight performance loss after 10,000 potential cycles, while TEM results showed its structure had remained intact. The catalyst’s outstanding performance may have resulted from the ultrahigh dispersion of Pt (several atomic layers coated on the nitride nanoparticles), and the excellent stability/durability may have been due to the good stability of nitride and synergetic effects between ultrathin Pt layer and the robust TiNiN support.
37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
A novel single-phase white phosphor NaBaBO{sub 3}:Dy{sup 3+},K{sup +} for near-UV white light-emitting diodes
Highlights: • A white phosphor NaBaBO{sub 3}:Dy{sup 3+},K{sup +} with CIE coordinate (0.301, 0.308) was synthesized. • The optimum doping concentration of Dy{sup 3+} ions was found. • The effect and mechanism of K{sup +} ion as a charge compensator were discussed. • Temperature-dependent PL property of NaBaBO{sub 3}:Dy{sup 3+},K{sup +} was studied. • PL decay and quantum efficiency behaviors of the samples were investigated. - Abstract: A novel Dy{sup 3+}-doped NaBaBO{sub 3} white-emitting phosphor has been prepared by high temperature solid-state reaction method. The phase structure and luminescence properties of NaBaBO{sub 3}:Dy{sup 3+},K{sup +} samples were investigated. Photoluminescence results show that the as-prepared samples could be effectively excited by near-ultraviolet (NUV) light and generate white light emission due to the {sup 4}F{sub 9/2} → {sup 6}H{sub 15/2} (blue) transition and {sup 4}F{sub 9/2} → {sup 6}H{sub 13/2} (yellow) transition of Dy{sup 3+} ions, respectively. The optimum doping concentration of Dy{sup 3+} ions in the NaBaBO{sub 3} host was determined to be 5.0 mol% and the CIE chromaticity of the sample was determined to be (0.301, 0.308). Moreover, the mechanism of K{sup +} ion as a charge compensator on the improvement of photoluminescence property and the effect of temperature on the photoluminescence property of NaBaBO{sub 3}:Dy{sup 3+},K{sup +} were investigated. Furthermore, photoluminescence decay and quantum efficiency behaviors of NaBaBO{sub 3}:Dy{sup 3+},K{sup +} were also studied. The present work demonstrates that the NaBaBO{sub 3}:Dy{sup 3+},K{sup +} phosphor is a potential candidate for NUV white light emitting diodes.
36 MATERIALS SCIENCE↗
Mechanistic modeling study on process optimization and precursor utilization with atmospheric spatial atomic layer deposition
Spatial atomic layer deposition (SALD) is a promising technology with the aim of combining the advantages of excellent uniformity and conformity of temporal atomic layer deposition (ALD), and an industrial scalable and continuous process. In this manuscript, an experimental and numerical combined model of atmospheric SALD system is presented. To establish the connection between the process parameters and the growth efficiency, a quantitative model on reactant isolation, throughput, and precursor utilization is performed based on the separation gas flow rate, carrier gas flow rate, and precursor mass fraction. The simulation results based on this model show an inverse relation between the precursor usage and the carrier gas flow rate. With the constant carrier gas flow, the relationship of precursor usage and precursor mass fraction follows monotonic function. The precursor concentration, regardless of gas velocity, is the determinant factor of the minimal residual time. The narrow gap between precursor injecting heads and the substrate surface in general SALD system leads to a low Péclet number. In this situation, the gas diffusion act as a leading role in the precursor transport in the small gap rather than the convection. Fluid kinetics from the numerical model is independent of the specific structure, which is instructive for the SALD geometry design as well as its process optimization.
42 ENGINEERING↗
Molecular dynamics simulations of Na{sup +} and leucine transport by LeuT
Molecular dynamics simulations are used to gain insight into the binding of Na{sup +} and leucine substrate to the bacterial amino acid transporter LeuT, focusing on the crystal structures of LeuT in the outward-open and inward-open states. For both conformations of LeuT, a third Na{sup +} binding site involving Glu290 in addition to the two sites identified from the crystal structures is observed. Once the negative charge from Glu290 in the inward-open LeuT is removed, the ion bound to the third site is ejected from LeuT rapidly, suggesting that the protonation state of Glu290 regulates Na{sup +} binding and release. In Cl{sup −}-dependent transporters where Glu290 is replaced by a neutral serine, a Cl{sup −} ion would be required to replace the role of Glu290. Thus, the simulations provide insights into understanding Na{sup +} and substrate transport as well as Cl{sup −}-independence of LeuT. - Highlights: • Ion binding site involving Glu290 is identified in the outward- and inward-open LeuT. • Sodium is released from inward-open LeuT once the side chain of Glu290 is protonated. • Protonation state of Glu290 regulates sodium binding and transport in LeuT.
37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
Fluidized bed coupled rotary reactor for nanoparticles coating via atomic layer deposition
A fluidized bed coupled rotary reactor has been designed for coating on nanoparticles (NPs) via atomic layer deposition. It consists of five major parts: reaction chamber, dosing and fluidizing section, pumping section, rotary manipulator components, as well as a double-layer cartridge for the storage of particles. In the deposition procedure, continuous fluidization of particles enlarges and homogenizes the void fraction in the particle bed, while rotation enhances the gas-solid interactions to stabilize fluidization. The particle cartridge presented here enables both the fluidization and rotation acting on the particle bed, demonstrated by the analysis of pressure drop. Moreover, enlarged interstitials and intense gas–solid contact under sufficient fluidizing velocity and proper rotation speed facilitate the precursor delivery throughout the particle bed and consequently provide a fast coating process. The cartridge can ensure precursors flowing through the particle bed exclusively to achieve high utilization without static exposure operation. By optimizing superficial gas velocities and rotation speeds, minimum pulse time for complete coating has been shortened in experiment, and in situ mass spectrometry showed the precursor usage can reach 90%. Inductively coupled plasma-optical emission spectroscopy results suggested a saturated growth of nanoscale Al{sub 2}O{sub 3} films on spherical SiO{sub 2} NPs. Finally, the uniformity and composition of the shells were characterized by high angle annular dark field-transmission electron microscopy and energy dispersive X-ray spectroscopy.
37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗