Arrays of Silicon Drift Detectors for an Extraterrestrial X-ray Spectrometer
N/A
Engineering topics
Publications and source records attributed to Chen, W.
N/A
We consider a cavity optomechanical system consisting of a Bose-Einstein condensate (BEC) interacting with two counterpropagating traveling-wave modes in an optical ring cavity. In contrast to the more familiar case where the condensate is driven by the standing-wave field of a high-Q Fabry-Perot cavity we find that both symmetric and antisymmetric collective density side modes of the BEC are mechanically excited by the light field. In the semiclassical, mean-field limit where the light field and the zero-momentum mode of the condensate are treated classically the system is found to exhibit a rich multistable behavior, including the appearance of isolated branches of solutions (isolas). We also present examples of the dynamics of the system as input parameters such as the frequency of the driving lasers are varied.
High quality HfO{sub 2} dielectrics have been grown on epitaxial graphene on 4H-SiC substrates and have been studied by using in situ x-ray photoemission spectroscopy. The in situ thermal treatment shows that the HfO{sub 2}/graphene/4H-SiC heterojunctions have good thermal stability up to 650 deg. C. A shift of core-level spectra from graphene layer implies that charge transfer takes place at the interface. The high thermal stability and sufficient barrier heights between HfO{sub 2} and graphene indicate that high-k dielectric grown on graphene is very promising for the development of graphene-based electronic devices.
Transactional Memory (TM) has received significant attention recently as a mechanism to reduce the complexity of shared memory programming. We explore the potential of TM to improve OpenMP applications. We combine a software TM (STM) system to support transactions with an OpenMP implementation to start thread teams and provide task and loop-level parallelization. We apply this system to two application scenarios that reflect realistic TM use cases. Our results with this system demonstrate that even with the relatively high overheads of STM, transactions can outperform OpenMP critical sections by 10%. Overall, our study demonstrates that extending OpenMP to include transactions would ease programming effort while allowing improved performance.
We present a theoretical study of a hybrid optomechanical system consisting of a Bose-Einstein condensate (BEC) trapped inside a single-mode optical cavity with a moving end mirror. The intracavity light field has a dual role: it excites a momentum side mode of the condensate, and acts as a nonlinear spring that couples the vibrating mirror to that collective density excitation. We present the dynamics in a regime where the intracavity optical field, the mirror, and the side-mode excitation all display bistable behavior. In this regime we find that the dynamics of the system exhibits Hamiltonian chaos for appropriate initial conditions.
N/A
This work investigated the effect of nominal boron (B) additions of 0.1 wt.% and 1.0 wt.% on the elevated-temperature (455 C) fatigue deformation behavior of Ti-6Al-4V (wt.%) for maximum applied stresses between 250 and 550 MPa (R = 0.1, 5 Hz). The alloys were evaluated in the as-cast condition as well as the cast-and-extruded condition. Boron additions resulted in a dramatic refinement of the as-cast grain size, and larger boron additions resulted in larger titanium-boride (TiB) phase volume percents. For the as-cast alloys, the B-containing alloys exhibited longer average fatigue lives than those for Ti-6Al-4V, which was suggested to be related to their increased strength and stiffness due to the addition of the strong and stiff TiB phase. The longest average fatigue lives were exhibited by the Ti-6Al-4V-0.1B alloy, which also exhibited the greatest elongation-to-failure value. The extrusions, which were performed in the {beta}-phase field, resulted in a significantly smaller grain size, a smaller {alpha}-colony size, and finer {alpha}-lath width compared to that for the as-cast B-modified alloys. The TiB whiskers were aligned in the extrusion direction and the {alpha}-phase was also strongly textured such that the basal plane was predominately oriented perpendicular to the extrusion axis. Together these microstructural features were responsible for the significantly higher 455 C yield strength, ultimate tensile strength, and fatigue strength exhibited by the cast-and-extruded alloys compared with the as-cast alloys. In the extruded condition, B-addition did not improve the tensile or fatigue strength.
We present the results of a search for occultation events by objects at distances between 100 and 1000 AU in lightcurves from the Taiwanese-American Occultation Survey (TAOS). We searched for consecutive, shallow flux reductions in the stellar lightcurves obtained by our survey between 7 February 2005 and 31 December 2006 with a total of {approx} 4.5 x 10{sup 9} three-telescope simultaneous photometric measurements. No events were detected, allowing us to set upper limits on the number density as a function of size and distance of objects in Sedna-like orbits, using simple models.
Several sets of hexagonal Silicon Drift Detector (SDD) arrays were produced by Brookhaven National Laboratory (BNL) and by the commercial vendor, KETEK. These detector arrays were tested at BNL. Each array consists of 14 independent SDD detectors (pixels) and two additional test pixels located at two corners of the array. The side of the detector upon which the X-ray radiation is incident (window side) has a thin junction covering the entire active area. The opposite side (device side) contains a drift-field electrode structure in the form of a hexagonal spiral and an electron collecting anode. There are four guard rings surrounding the 14-pixel array area on each side of the detector. Within each array, seven pixels have aluminum field plates - interrupted spirals that stabilize the electric potential under the Si-SiO{sub 2} interface, while the other seven do not. Three bias voltages are applied to control the drift field in the silicon volume; one is applied to a rectifying contact surrounding the central anode (one for each pixel), one is applied to the detector entrance window (common to the full array), and a third bias is applied to a contact on the outer portion of the spiral, common to all pixels in the array. Some arrays were recently tested in NSLS beam line U3C at BNL. For this work, we installed the complete assemblies in the vacuum and cooled them to -27degC. During this beam run, we collected spectra for energies ranging between 350 and 900 eV in several pixels, some with field plates and others without. The detailed testing results of several arrays are reported here.
A new set of thin-window silicon drift detectors composed of an array of hexagonal shaped detectors has been designed, constructed and tested for X-ray spectroscopy. Each individual ThinWinSDD has a thin entrance window on one side and a spiral shaped hexagonal cathode around a center anode on the other side. To produce the thin entrance window a 10 keV implantation of boron through a 500 A silicon dioxide was used. The implantation was followed by an annealing at 700 C for 30 min and a reactive ion etching step to ensure the removal of silicon dioxide from the smallest feature (5 mum). An aluminum layer is coated in the same vacuum system after back-sputtering. This step involves removing the native oxide that has formed on the top of the silicon substrate and then sputtering a 1100 A thick layer of aluminum onto the X-ray entrance window. The aluminum layer must be thick enough to block visible light, but thin enough to be transparent to soft X-rays down to 280 eV. We discuss first test results that include detector leakage current measurements and the response for multiple detectors exposed to the National Synchrotron Light Source's UV beam line U3C located at Brookhaven National Laboratory for X-ray energies as low as 280 eV.
Over the past three years NASA Marshall Space Flight Center has been collaborating with Brookhaven National Laboratory to develop a modular Silicon Drift Detector (SDD) X-Ray Spectrometer (XRS) intended for fine surface mapping of the light elements of the moon. The value of fluorescence spectrometry for surface element mapping is underlined by the fact that the technique has recently been employed by three lunar orbiter missions; Kaguya, Chandrayaan-1, and Chang'e. The SDD-XRS instrument we have been developing can operate at a low energy threshold (i.e. is capable of detecting Carbon), comparable energy resolution to Kaguya (<150 eV at 5.9 keV) and an order of magnitude lower power requirement, making much higher sensitivities possible. Furthermore, the intrinsic radiation resistance of the SDD makes it useful even in radiation-harsh environments such as that of Jupiter and its surrounding moons.
We study the many-body state of ultracold bosons in a bistable optical lattice potential in an optomechanical resonator in the weak-coupling limit. Interesting physics arises as a result of bistability and discontinuous jumps in the cavity field. Of particular interest is the situation where the optical cavity is engineered so that a single input beam can result in two radically different stable ground states for the intracavity gas: superfluid and Mott insulator. Furthermore, the system we describe can be used as an adjustable template for investigating the coupling between cavity fields, nanomechanical systems operating in the quantum regime, and ultracold atomic gases.
We report a measurement of the differential cross section for the gamman->pi{sup -}p process from the CLAS detector at Jefferson Laboratory in Hall B for photon energies between 1.0 and 3.5 GeV and pion center-of-mass (c.m.) angles (theta{sub c.m.}) between 50 deg. and 115 deg. We confirm a previous indication of a broad enhancement around a c.m. energy (sq root(s)) of 2.1 GeV at theta{sub c.m.}=90 deg. in the scaled differential cross section s{sup 7}(dsigma/dt) and a rapid falloff in a center-of-mass energy region of about 400 MeV following the enhancement. Our data show an angular dependence of this enhancement as the suggested scaling region is approached for theta{sub c.m.} from 70 deg. to 105 deg.
Interactions between plants and microbes are an integral part of our terrestrial ecosystem. Microbe-plant interactions are being applied in many areas. In this review, we present recent reports of applications in the areas of plant-growth promotion, biocontrol, bioactive compound and biomaterial production, remediation and carbon sequestration. Challenges, limitations and future outlook for each field are discussed.
High-pressure angle-dispersive x-ray diffraction measurements have been performed on bulk and nanocrystalline cubic CeO{sub 2} with mean sizes of 4.7 and 5.6 nm. It is found that the compressibility of the nanocrystals is lower than the bulk when a threshold pressure is reached. This critical pressure is found to be 10 GPa for 4.7 nm and 16 GPa for 5.6 nm CeO{sub 2} nanocubes. The particle size dependence of the threshold pressure for the hardening of CeO{sub 2} nanoparticles is quite unusual. First-principles electronic calculations show that the increased bulk modulus of the nanocrystal is due to the strengthening of the surface Ce-O bonds resulting in a much larger shear modulus than in the bulk and consequently hardening the shell surface.
Activated carbon was tailored with both iron and quaternary ammonium surfactants so as to concurrently remove both arsenate and perchlorate from groundwater. The iron (hydr)oxide preferentially removed the arsenate oxyanion but not perchlorate; while the quaternary ammonium preferentially removed the perchlorate oxyanion, but not the arsenate. The co-sorption of two anionic oxyanions via distinct mechanisms has yielded intriguing phenomena. Rapid small-scale column tests (RSSCTs) with these dually prepared media employed synthetic waters that were concurrently spiked with arsenate and perchlorate; and these trial results showed that the quaternary ammonium surfactants enhanced arsenate removal bed life by 25-50% when compared to activated carbon media that had been preloaded merely with iron (hydr)oxide; and the surfactant also enhanced the diffusion rate of arsenate per the Donnan effect. The authors also employed natural groundwater from Rutland, MA which contained 60 microg/L As and traces of silica, and sulfate; and the authors spiked this with 40 microg/L perchlorate. When processing this water, activated carbon that had been tailored with iron and cationic surfactant could treat 12,500 bed volumes before 10 microg/L arsenic breakthrough, and 4500 bed volumes before 6 microg/L perchlorate breakthrough. Although the quaternary ammonium surfactants exhibited only a slight capacity for removing arsenate, these surfactants did facilitate a more favorably positively charged avenue for the arsenate to diffuse through the media to the iron sorption site (i.e. via the Donnan effect).
No abstract prepared.
Lung cancer rates in Xuanwei County have been among the highest in China for both males and females and have been causally associated with exposure to indoor smoky (bituminous) coal emissions that contain very high levels of polycyclic aromatic hydrocarbons. There are numerous coal mines across the County. Although lung cancer risk is strongly associated with the use of smoky coal as a whole, variation in risk by smoky coal subtype has not been characterized as yet. We conducted a population-based case-control study of 498 lung cancer cases and 498 controls, individually matched to case subjects on age and sex to examine risk by coal subtype. Odds ratios (ORs) and 95% confidence intervals (CIs) for coal subtype were calculated by conditional logistic regression, adjusting for potential confounders. Overall, smoky coal use was positively and statistically significantly associated with lung cancer risk, when compared with the use of smokeless coal or wood (OR = 7.7, 95% CI = 4.5-13.3). Furthermore, there was a marked heterogeneity in risk estimates for specific subtypes of smoky coal (test for heterogeneity: p = 5.17 x 10{sup -10}). Estimates were highest for coal of the Laibin (OR = 24.8, 95 % CI = 12.4-49.6) and Longtan (OR = 11.6, 95 % CI = 5.0-27.2) coal types and lower for coal from other subtypes. These findings strongly suggest that in Xuanwei and elsewhere, the carcinogenic potential of coal combustion products can exhibit substantial local variation by specific coal source.