Search NASA⌕ Search

Engineering topics

Chen, Xi Chelsea

Publications and source records attributed to Chen, Xi Chelsea.

At least 19 records

Molecular structures of residual solvent in polyacrylonitrile based electrolytes: Implications for conductivity and stability

Lithium-ion batteries increasingly play significant roles in modern technologies; however, increased energy density also raises concerns about electrolyte safety. Traditional electrolytes that use volatile organic solvents face risks of thermal runaways and fires from electrode shorting. In response, polymer-based solid electrolytes have been developed for replacement. Polyacrylonitrile (PAN) is a promising fire-resistant component for electrolyte fabrication, but its limited solubility necessitates using low-volatility solvents, which are notoriously difficult to remove in subsequent drying processes. Here, we use femtosecond two-dimensional infrared spectroscopy to provide an in-depth understanding of how residual solvent from processing affects the molecular structures and dynamics within a polymer electrolyte. To this end, linear and nonlinear infrared spectroscopies are employed to interrogate the molecular interactions in PAN-based electrolytes containing various contents of N,N-dimethylformamide (DMF). We show that the amount of DMF within the PAN electrolyte affects the Li+ structure. Further, the coordination can proceed through the carbonyl group and/or the amide nitrogen to form antiparallel structures with the nitrile groups of PAN through dipole–dipole interactions. The free motion of DMF is drastically inhibited upon interaction with Li+ and PAN, which decreases the ionic conductivity and potentially affects the stability (resistance toward removal and chemical decomposition). These findings have implications for the design and processing of solid polymer electrolytes.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

The Impact of Lithium Anode Interface on Capacity Fade in Polymer Electrolyte-Based Solid-State Batteries

This study investigates the Li stripping-plating morphology and failure mechanisms in full cells consisting of a solid polymer electrolyte (SPE) with two commercial Li anodes: Li chip and Li foil. The primary identified failure mechanism of the SPE cell is capacity fade, regardless of the Li manufacturer. While the cathode’s role in capacity fade is evident, the Li anode significantly influences cycling performance, with Li foil cells cycling 50% longer than Li chip cells, a statistical difference. Further, post-mortem scanning electron microscopy and X-ray photoelectron spectroscopy results attribute the Li chip’s faster capacity fade to a loss of contact and continuous growth of the solid electrolyte interphase (SEI). Conversely, Li foil maintains consistent contact with the solid polymer, displaying a thin and stable SEI. Additionally, failure mechanisms between a gel electrolyte in previous work and the dry SPE are compared.

25 ENERGY STORAGE↗

Percolating Interfacial Layers Enhance Conductivity in Polymer–Composite Electrolytes

Here, this study investigates the impact of the ceramic particle size on the bulk and interfacial ion transport properties of composite polymer electrolytes. The ceramic particles used for this study are micrometer-sized commercial lithium lanthanum titanate (LLTO) powders and LLTO nanorods (NR) prepared in the laboratory. The polymer matrices are vinylene carbonate (VEC) based single-ion-conducting (SIC) and dual-ion-conducting (DIC) polymer electrolytes. Our results reveal that the addition of LLTO NR results in improved ion transport, while the addition of commercial LLTO is ineffective or even detrimental. We ascribe these results to the formation of an interfacial polymer layer around the LLTO particles with enhanced Li + mobility and estimate the thickness of the interfacial layer to be ∼5 nm. The high surface-to-volume ratio of the LLTO NR leads to the percolation of the interfacial region at a relatively low ceramic loading of 30 wt %. This study highlights the importance of achieving percolation of the interface region (as opposed to the particles themselves) within the composite electrolyte when the interfacial layer is the enhancement mechanism.

Ock, Ji-young↗

Electroanalytical Exploration of Li Loss at the Solid Electrolyte-Anode Interface in Anode-Free Batteries with Polymer Electrolytes

Li loss during cycling at the solid electrolyte|anode interface strongly determines the cycle life of anode-free solid-state batteries (SSBs). Here, this loss is probed electroanalytically for polymer electrolyte (PE)-based SSBs in anode-free coin cells with practical pressures. A wide range of parameters expected to impact the measured average coulombic efficiency (CE) were explored to estimate the expected range of performance. These factors include PE type, cycling profiles, current collector type, and the presence of a thin Li seed layer. Further, low CE values in the ~50%–85% range are observed for all electrolytes and test conditions. Other than the electrolyte type, a strong dependence of the CE on the electrochemical cycling profile and the type of metallic current collector is observed. Compared to the anode-free setup, the presence of a thin (5 μ m) Li seed layer did not improve the average CE for two out of three PEs, suggesting its presence to be a weak contributor in minimizing the Li loss. This work provides baseline data on the Li losses in low-pressure anode-free configuration cells with PEs.

25 ENERGY STORAGE↗

Probing the interface structure of block copolymer compatibilizers in semicrystalline polymer blends

Abstract The use of block copolymers to compatibilize immiscible plastics is an important strategy for upcycling municipal plastic wastes. Multiblock copolymers (MBCPs) have been proven to be more effective compatibilizers than di‐ and tri‐block copolymers. Herein, we probe the interface structure of an effective multiblock copolymer compatibilizer and compare that with an ineffective triblock copolymer (TBCP). The interface activity of the compatibilizers is understood through a combination of small‐angle neutron and x‐ray scatterings (SANS and SAXS), by using deuterated homopolymer matrix and protonated compatibilizers. SANS analysis suggests that the MBCP forms a thicker interface layer (7–9 nm) than the TBCP (0–4 nm). In addition, SANS data seems to point to a stronger tendency for the MBCP to locate at the interface. Both factors contribute to its effectiveness at compatibilizing immiscible homopolymers.

36 MATERIALS SCIENCE↗

Densification Pressure Optimization of MOF-808-Based Membranes for Lithium Metal Batteries

The use of metal–organic frameworks (MOFs) in hybrid electrolytes for lithium (Li) metal batteries has grown in prominence in recent years, primarily due to the chemical tunability of the MOF’s pore structures, which can directly influence Li–ion transport properties. The most attractive form factor for a MOF electrolyte is a thin, flexible membrane, which requires the application of pressure to increase the contact between the MOF particles. Herein, a systematic study of the influence of pressure on the properties of MOF-808-based membranes is presented. It is shown that when a dry, roll-pressed membrane is subjected to pressure ≥120 MPa, a total loss of crystallinity and a significant loss of porosity is observed. Alternatively, a slurry-cast membrane, compressed under controlled pressures, can maintain crystallinity and porosity while decreasing the interparticle void space. Interesting, the conductivity of the membranes infiltrated with liquid electrolyte is not greatly affected by the pressure applied, though ultimately it is shown that for cycling with Li metal, compressed membranes with compact particles are preferred. In conclusion, this study highlights the critical importance of controlling the pressure applied to MOF-based membranes during fabrication and during cell assembly and lays out the foundation for further investigation of how to optimize membrane fabrication for hybrid electrolytes that use MOFs as the dominate component.

25 ENERGY STORAGE↗

Two-layer cathode architecture for high-energy density and high-power density solid state batteries

Solid state batteries with high-energy density and high-power density require the development of thick and energy dense cathodes. Structured cathode electrodes with a double-layer configuration were enabled using a freeze tape casting technique. A bottom dense layer was utilized to enhance the energy density whereas a top porous layer with vertically aligned walls was utilized to enhance the power density. The porous structure of the power layer was achieved by ice templating this layer on top of the densified energy layer of the cathode. This configuration was found to better utilize the active material of the cathodes and was optimized using numerical simulation and computer modeling. Cells with Li metal anode and LiNi 0.6 Mn 0.2 Co 0.2 O 2 (NMC622) at approximately 5 and 20 mg/cm 2 were cycled at 70 °C at different C-rates. Poly(ethylene oxide) (PEO) with lithium bis-trifluoromethanesulfonimide (LiTFSI) was used for the catholyte and the solid-state electrolyte. The structured cathodes exhibited more than double capacity values as well as better Coulombic efficiency compared to non-structured (single-layer) thick cathodes. In conclusion, synchrotron X-ray tomography and scanning electron microscopy were used to characterize the microstructure of the cathodes.

25 ENERGY STORAGE↗

Origin of rate limitations in solid-state polymer batteries from constrained segmental dynamics within the cathode

Currently, one of the key challenges preventing the wide commercialization of polymer-based solid-state batteries is achieving high-rate capabilities. This work unravels chain structure and segmental dynamics in a polymer-based composite cathode consisting of LiFePO 4 (LFP), carbon, and poly(ethylene oxide) (PEO) with lithium bis(trifluoromethanesulfonyl)imide. Small-angle neutron scattering (SANS) data reveal that PEO chains are adsorbed on the surface of LFP particles during slurry processing to make the composite electrode. The strong interaction between LFP and PEO chains leads to greatly reduced segmental dynamics of PEO, as discovered by quasi-elastic neutron scattering (QENS). The reduced segmental dynamics results in 70% decreased Li + mobility of the polymer electrolyte in the composite cathode. The combined SANS and QENS study indicates that one of the key bottlenecks that limits the rate performance of PEO-based polymer batteries originates from molecular interactions within the cathode.

25 ENERGY STORAGE↗

Single Ion Conducting Hairy Nanoparticle Additive to Improve Cycling Stability of Solid Polymer Electrolytes

The development of a solid electrolyte that can impede dendrite growth while still maintaining an appropriate level of conductivity is essential for improving performance of solid-state Li-ion battery. In this paper, we report the synthesis of single Li-ion conducting hairy nanoparticle (NP) materials that improved the cycling stability of lithium bis(trifluoromethanesulfonyl)imide (LiTFSI)-doped poly(ethylene oxide) (PEO) solid electrolyte without significant reduction in conductivity. To unveil mechanisms leading to improved cycling stability, several characterization techniques including broadband dielectric spectroscopy, differential scanning calorimetry, small angle X-ray scattering, transmission electron microscopy, and shear rheology were used to study properties of polymer composites (PC) with added hairy NPs. It was found that hairy NPs influenced the Li/electrolyte interface and improved mechanical properties of bulk composites, all of which contributed to homogenous Li plating and stripping. The improved performance has been found in composites with concentrations of 4.8 and 9.1 weight % of added hairy NPs, which enabled Li cycling stability at 0.2 mA cm–2 critical current density (>300 h) that was otherwise not possible in either PEO-LiTFSI alone or PEO-LiTFSI composites containing a polymer identical to that attached to hairy NPs. Based on the discovered ability of hairy NP to influence bulk and interfacial properties of solid electrolyte, their use as additives is expected to be equally effective in reducing dendrite formation in other electrolytes relevant for the design of solid-state battery.

25 ENERGY STORAGE↗

Role of Scaffold Architecture and Excess Surface Polymer Layers in a 3D-Interconnected Ceramic/Polymer Composite Electrolyte

3D-interconnected ceramic/polymer composite electrolytes offer promise to combine the benefits of both ceramic and polymer electrolytes. However, an in-depth understanding of the role of the ceramic scaffold's architecture, and the associated polymer/ceramic interfaces on the electrochemical properties of such composite electrolytes is still incomplete. Here, these factors are systematically evaluated using an interconnected composite electrolyte with a tunable and well-defined architecture. The ionic conductivity of the ceramic scaffold is strongly dependent on its porosity and tortuosity, as demonstrated experimentally and via theoretical modeling. The connectivity of the ceramic framework avoids the high interfacial impedance at the polymer/ceramic electrolyte interface within the composite. However, this work discovers that the interfacial impedance between the bulk composite and excess surface polymer layers of the composite membrane dominates the overall impedance, resulting in a 1–2 order drop of ionic conductivity compared to the ceramic scaffold. Despite the high impedance interfaces, an improved Li + transference number is found compared to the neat polymer (0.29 vs 0.05), attributed to the ceramic phase's contributions toward ion transport. Further, this leads to flatter overpotentials in lithium symmetric cell cycling. These results are expected to guide future research directions toward scalable manufacturing of composite electrolytes with optimized architecture and interfaces.

25 ENERGY STORAGE↗

Quaternized Polynorbornene Random Copolymers for Fuel Cell Devices

Quaternized polymers are critical components for various energy devices. Vinyl-addition polynorbornenes provide high mechanical strength, high ion conductivity, and chemical stability in a wide range of pH environments due to the all-C–C bond backbone. In this paper, we present the synthesis of a series of quaternized polynorbornene random copolymers via vinyl addition polymerization and elucidate the impact of polymer composition on their properties. The quaternary ammonium alkyl tether length and the ratio of n-hexylnorbornene to unsubstituted norbornene are systemically tailored. A copolymer of 5-(3-bromopropyl)-2-norbornene and norbornene with pendant trimethylammonium groups achieved hydroxide conductivity of 109 mS/cm at 80 °C with a modest water uptake of 72%. The addition of n-hexylnorbornene to the copolymer, to make a terpolymer, allows for the polymer composition to be tailored for properties, including a decrease in water uptake and higher processability, despite a slightly decreased hydroxide conductivity. Moreover, the developed membranes are chemically robust and highly mechanically stable, enabling thin membranes to be easily fabricated. This study provides insight into important design parameters for quaternized polynorbornenes for a variety of energy storage and conversion devices, especially fuel cells.

25 ENERGY STORAGE↗

Constructing a multi-functional polymer network for ultra-stable and safe Li-metal batteries

We report the practical application of lithium (Li) metal electrodes is impeded by Li dendrite growth and unstable solid electrolyte interphase (SEI). Herein, a multi-grafting polymer network, poly(dimethyl siloxane)-g-[poly(poly(ethylene glycol) methyl ether methacrylate)-r-sodium poly(p-styrene sulfonate)] (PPS), is chemically synthesized from reversible addition-fragmentation chain transfer (RAFT) polymerization. With integrated stretchability, ionic conductivity, and mechanical robustness, it serves a dual role to stabilize the Li electrode. As artificial SEI layer, the PPS enables superior electrochemical performance in half cells, symmetric cells, and full cells (PPS@Li/LiFePO 4 , capacity retention of >70% after 600 cycles). Utilized as solid polymer electrolyte (SPE), the all-solid-state Li/SPE/LiFePO 4 full cell delivers excellent cycling performance with an unprecedented capacity retention of 90% over 1,700 cycles at 0.5 C and 81% over 1,000 cycles at 1.0 C. With high-voltage LiNi 0.8 Mn 0.1 Co 0.1 O 2 (NMC811) as cathode, the Li/SPE/NMC811 cell exhibits an initial discharge capacity of 162.2 mAh g -1 with a capacity retention of 72% after 200 cycles. The assembled solid-state Li/SPE/LiFePO4 pouch cell with SPE exhibits stable cycling performance over 200 cycles with a capacity retention of 75% and still operates well even after curling, folding, and cutting, demonstrating great potential for achieving ultra-safe and high energy density batteries.

25 ENERGY STORAGE↗

Li Morphology Evolution during Initial Cycles in a Gel Composite Polymer Electrolyte

Understanding and controlling lithium morphology evolution and lithium dendrite formation and growth during cycling is one of the key challenges for high-energy lithium metal batteries. This challenge applies to liquid electrolyte batteries as well as solid-state and semi-solid-state batteries. Our current knowledge about the evolution of the Li morphology is mostly obtained from liquid electrolyte-based studies in a Li–Li symmetrical cell configuration. The knowledge obtained in such conditions may not readily transfer into solid-state or semi-solid-state batteries. In this work, Li morphology evolution during initial cycling in a full cell configuration with the LiNi 0.6 Co 0.2 Mn 0.2 O 2 (NMC 622) cathode and a semi-solid-state gel composite electrolyte is monitored via post-mortem photographs and scanning electron microscopy at multiple length scales. The gel composite electrolyte contains a cross-linked poly(ethylene oxide)-based polymer electrolyte, ceramic fillers, and a liquid plasticizer. The results show that severe surface pitting occurs as early as the second stripping cycle. Pit formation and continuous dissolution during the stripping process are the main cause of the Li surface roughening and dendrite growth mechanism in the model gel composite electrolyte. Comparing Li dendrite growth mechanisms in liquid, polymer, and ceramic solid electrolytes, the dendrite growth mechanism observed in this model electrolyte resembles that of the liquid electrolyte the most. This study suggests that strategies to control Li morphology and prevent dendrite growth in a gel composite electrolyte should be similar to strategies applicable to liquid electrolytes.

25 ENERGY STORAGE↗

Selective Plasticization of Poly (ethylene oxide) (PEO) Block in Nanostructured Polystyrene– PEO– Polystyrene Triblock Copolymer Electrolytes

The plasticization of a polymer electrolyte usually promotes its ionic conductivity but decreases its storage modulus due to the increased polymer chain flexibility. Herein, we show that such a tradeoff between the ionic conductivity and the mechanical robustness of the polymer electrolyte can be alleviated by selective plasticization of the ion-conductive block, such as poly(ethylene oxide) (PEO) in a polystyrene (PS)– PEO–PS block copolymer (SEO) electrolyte using an ether type plasticizer, tetraethylene glycol dimethyl ether (TEGDME). In this work, at maximum plasticizer loading, the room temperature ionic conductivity increases by up to 3 orders, whereas the storage modulus, G' reduces to half, is still on the order of 10 2 MPa. At above the melting temperature of the PEO block, the dynamic storage modulus, G' of the plasticized membrane surpasses its dry PS-PEO-PS counterpart. Such a phenomenon results from that, a) TEGDME co-crystallizes with PEO to promote its crystallinity and hence the storage modulus, b) TEGDME swells the amorphous PEO phase to enhance the polymer chain segmental mobility and hence ionic conductivity, and c) the PS phase remains intact from TEGDME to keep the SEO elastic.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Polyacrylonitrile-based electrolytes: How processing and residual solvent affect ion transport and stability

Polyacrylonitrile (PAN) is one of the alternative candidate polymer hosts to form solid polymer electrolytes (SPEs) besides the widely used poly(ethylene oxide). In this study, we systematically investigate the processing of PAN based SPEs containing lithium bis(trifluoromethanesulfonyl)imide (LiTFSI) salt, using dimethylformamide (DMF) as the solvent. The effects of PAN processing procedure including solution mixing, casting, and drying on the morphology, ion transport, solvation structure, Li and oxidative stability of PAN electrolytes are thoroughly examined. In particular, four drying conditions are investigated and the amount of residual DMF is accurately determined using infrared (IR) spectroscopy. Varying the drying conditions can lead to five orders of magnitude decrease in the ionic conductivity. As DMF content decreases, the SPE's stability again Li metal dramatically improves. The practical oxidative stability is also strongly affected by the residual DMF content, ranging from 2.5 V to 3.5 V, much lower than reported values. Finally, the role of the residual DMF solvent is elucidated. DMF content vitally influences ion solvation structure at different concentration regimes, which ultimately dictates the ion conduction mechanism and oxidative stability of PAN based SPEs. In conclusion, this thorough study lays the groundwork for future development of PAN based electrolytes.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

A Bilayer Electrolyte Design to Enable High-Areal-Capacity Composite Cathodes in Polymer Electrolytes Based Solid-State Lithium Metal Batteries

High-areal-capacity cathodes are needed for energy-dense solid-state batteries. Here, we demonstrate a bilayer polymer electrolyte design for cycling 3–6 mAh/cm 2 NMC811 composite cathodes. In this work, the bilayer electrolyte comprises a cross-linked poly(ethylene oxide) (PEO)-based electrolyte layer and a linear-PEO-based electrolyte layer. The former provides dendritic resistance, and the latter provides a seamless interface with the cathode during cycling. Using a single layer of either membrane led to severe shorting or extremely low Coulombic efficiency (CE) in the first cycle. The general concept of a rigid dendrites-inhibiting electrolyte facing Li anode and a softer, cathode-integrated electrolyte that ensures contact with the cathodes during cycling may present a pattern for enabling high-energy-density cathodes.

25 ENERGY STORAGE↗

Multifunctional approaches for safe structural batteries

Recent advancements in Li and Li-ion based energy storage resulted in development of novel electrode materials for higher energy density which are finding their applications in transportation. There appears to be a limitation in improvement of specific energy of the system based solely on design of material compositions for multivalent intercalation compounds. In addition, higher energy stored by the system implies need for addressing safety concerns especially when it comes to large automotive battery packs. New approaches for improvement of both energy density and safety of batteries are emerging, where multifunctionality of the materials and/or architectures is utilized. Here, we present a review for such approaches from multifunctional current collectors to design of batteries capable of supporting mechanical loads and thus possessing ability to be used as a structural component.

25 ENERGY STORAGE↗