Search NASA⌕ Search

Engineering topics

Chen, Xiaowei

Publications and source records attributed to Chen, Xiaowei.

At least 19 records

Precise relative magnitude measurement improves fracture characterization during hydraulic fracturing

SUMMARY Microseismic monitoring is an important technique to obtain detailed knowledge of in-situ fracture size and orientation during stimulation to maximize fluid flow throughout the rock volume and optimize production. Furthermore, considering that the frequency of earthquake magnitudes empirically follows a power law (i.e. Gutenberg–Richter), the accuracy of microseismic event magnitude distributions is potentially crucial for seismic risk management. In this study, we analyse microseismicity observed during four hydraulic fracture treatments of the legacy Cotton Valley experiment in 1997 at the Carthage gas field of East Texas, where fractures were activated at the base of the sand-shale Upper Cotton Valley formation. We perform waveform cross-correlation to detect similar event clusters, measure relative amplitude from aligned waveform pairs with a principal component analysis, then measure precise relative magnitudes. The new magnitudes significantly reduce the deviations between magnitude differences and relative amplitudes of event pairs. This subsequently reduces the magnitude differences between clusters located at different depths. Reduction in magnitude differences between clusters suggests that some attenuation-related biases could be effectively mitigated with relative magnitude measurements. The maximum likelihood method is applied to understand the magnitude frequency distributions and quantify the seismogenic index of the clusters. Statistical analyses with new magnitudes suggest that fractures that are more favourably oriented for shear failure have lower b-value and higher seismogenic index, suggesting higher potential for relatively larger earthquakes, rather than fractures subparallel to maximum horizontal principal stress orientation.

58 GEOSCIENCES↗

Chalcogen effect on the photovoltaic performance of nonfused-ring small molecular electron acceptors for efficient organic solar cells

Fused-ring electron acceptors (FREAs) are the current working horse for the top performing organic solar cells (OSCs). Nevertheless, these FREAs surfer from high synthetic complexity, production costs and poor scalability, hindering their industrialization. Developing nonfused-ring electron acceptors (NFREAs) is a more feasible alternative solution towards future photovoltaic applications. Here, in this work, a series of NFREAs have been designed and synthesized by introducing chalcogen atoms on the side chains for OSCs. The introduced chalcogen atoms (O, S, and Se) not only modulated the energy levels but also finely tuned the intermolecular interactions. Especially, the formed S···S and Se···Se intermolecular interactions in TTS-4F and TTSe-4F resulted in higher molecular crystallinity than TTO-4F. Unexpectedly, the strong Se···Se interactions also led the aggregation of TTSe-4F and formation of large domains in the PM6:TTSe-4F blend. The moderate S···S interactions in TTS-4F enabled an optimal phase separation with more ideal nano fibrils distributed in the PM6:TTS-4F blend, facilitating the charge separation and transport. As a result, TTS-4F based devices achieved a champion power conversion efficiency (PCE) of 14.74%, higher than the TTO-4F (8.76%) and TTSe-4F (11.56%) based devices.

36 MATERIALS SCIENCE↗

Quantifying rupture characteristics of microearthquakes in the Parkfield Area using a high-resolution borehole network

It is well known that large earthquakes often exhibit significant rupture complexity such as well separated subevents. With improved recording and data processing techniques, small earthquakes have been found to exhibit rupture complexity as well. Studying these small earthquakes offers the opportunity to better understand the possible causes of rupture complexities. Specifically, if they are random or are related to fault properties. We examine microearthquakes (M < 3) in the Parkfield, California, area that are recorded by a high-resolution borehole network. We quantify earthquake complexity by the deviation of source time functions and source spectra from simple circular (omega-square) source models. We establish thresholds to declare complexity, and find that it can be detected in earthquakes larger than magnitude 2, with the best resolution above M2.5. Comparison between the two approaches reveals good agreement (>90 per cent), implying both methods are characterizing the same source complexity. For the two methods, 60–80 per cent (M 2.6–3) of the resolved events are complex depending on the method. The complex events we observe tend to cluster in areas of previously identified structural complexity; a larger fraction of the earthquakes exhibit complexity in the days following the M w 6 2004 Parkfield earthquake. Ignoring the complexity of these small events can introduce artefacts or add uncertainty to stress drop measurements. Focusing only on simple events however could lead to systematic bias, scaling artefacts and the lack of measurements of stress in structurally complex regions.

58 GEOSCIENCES↗

Influence of Fault Architecture on Induced Earthquake Sequence Evolution Revealed by High-Resolution Focal Mechanism Solutions

The increasing seismicity and improved seismic observation network in recent years provide an opportunity to explore factors that influence the triggering processes, spatiotemporal evolution, and maximum magnitude of induced sequences. We map the fault architecture and stress state of four induced sequences in Oklahoma to determine their influence on the seismicity. We systematically relocate the earthquakes and compute hundreds of focal mechanisms of small to medium events (1.0 < M < 5.1) using various techniques, including machine learning, for the Guthrie, Woodward, Cushing, and Fairview sequences. The detailed fault geometry and spatiotemporal evolution of seismicity and stress states reveal different dominant driving forces for each sequence. In Cushing and Fairview (largest event ≥M5.0), the main fault structures are near-vertical narrow strike-slip faults, with most of the small earthquake fault planes optimally oriented. The two sequences exhibit discontinuous temporal migration but strong earthquake self-driven rupture growth. In Guthrie and Woodward (largest event <M5.0), the two sequences show more complex diffuse fault structures with varying dipping angles along depth. The inverted focal mechanisms show a mix of strike-slip faulting and normal faulting in both sequences, and the normal faulting events are less optimally oriented than strike-slip events. The two sequences are dominated by continuous diffusive migration in time driven by pore pressure propagation. The above results suggest that fault architecture and stress state influence sequence evolution, major driving forces, and possibly maximum magnitude.

58 GEOSCIENCES↗

Online eco-routing for electric vehicles using combinatorial multi-armed bandit with estimated covariance

Identifying energy-efficient routes in real-time has significant implications for the energy-optimal operations of electric vehicles (EVs). Here, this study proposes a novel model for EV online eco-routing problem, which obtains the minimal expected energy consumption paths (MECPs) for multiple origin-destination (OD) pairs simultaneously. Specifically, we formulate the routing problem as a bandit problem and solve it with online algorithms. We extend the algorithms by implementing a path elimination mechanism to reduce the candidate path set and introducing the variance and covariance of the energy consumption to reduce the uncertainties. The numerical results show that the proposed algorithms can efficiently obtain near-optimal MECPs, and the solution is significantly better than the widely used shortest trip time path algorithm (STTP) and shortest trip distance path algorithm (SDP). The variation considering link energy covariance and path elimination generates paths that save 4.1% of energy compared to the SDP and 5.4% to the STTP.

33 ADVANCED PROPULSION SYSTEMS↗

Improving the performance of PM6 donor polymer by random ternary copolymerization of BDD and DTBT segments

Developing high-performance wide bandgap polymer donors to match the rapidly growing non-fullerene small molecule acceptors (NF-SMAs) is of great importance to further improve the photovoltaic performances of organic solar cells (OSCs). PM6 and D18 are two leading wide bandgap donor polymers, but their performances are highly sensitive to the molecular weights, which have distinct impact on the morphology and thereby the charge generation and recombination processes. Here, in this work, we reported the random ternary copolymerization of PM6 and D18 segments to develop random terpolymers with finely tuned photoelectronic properties and optimized blend morphology for high-performance OSCs. The resulting random terpolymers (PMD-5, PMD-10, PMD-15 and PMD-20) exhibited finely tuned absorptions, energy levels and blend morphology. The optimal morphology of PMD-15:L8-BO contributed to the fast exciton diffusion and dissociation, efficient charge extraction with suppressed recombination. Thus, the power conversion efficiency was improved from 17.22% of the control PM6 devices and 17.47% of the control D18 devices to 18.12% of PMD-15 based devices, which is the top performance of random terpolymers. Moreover, the PMD-15 exhibited much higher batch-to-batch reproducibility at a broad molecular weight range than that of PM6 and D18, showing promising for practical applications.

36 MATERIALS SCIENCE↗

Forecasting induced seismicity in Oklahoma using machine learning methods

Oklahoma earthquakes in the past decade have been mostly associated with wastewater injection. Here we use a machine learning technique—the Random Forest to forecast induced seismicity rate in Oklahoma based on injection-related parameters. We split the data into training (2011.01–2015.05) and test (2015.06–2020.12) periods. The model forecasts seismicity rate during the test period based on input features, including operational parameters (injection rate and pressure), geological information (depth to basement), and modeled pore pressure and poroelastic stress. The results show overall good match with observed seismicity rate (adjusted R 2 of 0.75). The model shows that pore pressure rate and poroelastic stressing rates are the two most important features in forecasting. The absolute values of pore pressure and poroelastic stress, and the injection rate itself, are less important than the stressing rates. These findings further emphasize that temporal changes of stressing rates would lead to significant changes in seismicity rates.

58 GEOSCIENCES↗

Multi-modal Energy-optimal Trip Scheduling in Real-time (METS-R) for Transportation Hubs (Final Report)

This report summarizes the work performed under the award number EE0008524. The project develops the Multi-modal Energy-optimal Trip Scheduling in Real-time (METS-R) platform as the next-generation transportation solution based on autonomous electric vehicles (AEV) serving passenger trips from and to urban transportation hubs, to substantially reduce transportation energy consumption. Extensive data collection and analyses were first conducted to understand the demand patterns and energy consumption of hub-based on-road trips. Then, a data-driven framework that consists of an analytical module and a simulation module was proposed. For the analytical module, five planning + operation tools were developed to support the planning and energy-efficient operations of urban AEV services: the charging station planning that robotically allocates charging supplies based on the stationary charging demand distribution; the transit planning and demand adaptive scheduling model that efficiently generates\ candidate transit routes from hubs to other places and dynamically adjusts the transit time table to fit the current demand; the online energy-efficient routing that learns the energy-optimal paths from observations of link-level energy consumption in real-time; the hub-based ridesharing that matches trip requests together with account for the uncertainty of future trip demand and vehicle supply; and finally, the integrated demand prediction and anomaly detection pipeline that leverages the flight/train time table and support other planning/operation tools. To demonstrate the performance of these tools, a scalable high-performance agent-based simulator was built. We divided the urban space into multiple service zones where each zone was considered as an agent for passenger generation and vehicle charging. Two types of AEV agents were coded to model two types of mobility services: AEV taxi and AEV transit. For the AEV taxi, the team implemented the functions of pickup/drop-off passengers, energy-efficient routing, ridesharing, fleet rebalancing, and recharging. For the AEV bus, the team implemented the functions of demand-adaptive route scheduling, passenger boarding, and recharging. A high-performance computing framework was introduced to receive various profiling information (such as link energy updates, vehicle speed) from the simulator instances and communicate the operational commands back to the instances. The numerical experiments show that each of the proposed operational algorithms can reduce energy consumption and improve system efficiency. Furthermore, there exists the need to collectively consider multiple planning + operational strategies as multiple strategies can influence each other in terms of performance impacts. Recommendations for future work related to AEV planning and simulation are discussed.

29 ENERGY PLANNING, POLICY, AND ECONOMY↗

ADDS-EVS: An agent-based deployment decision-support system for electric vehicle services

Rapid and sustainable development of the electric vehicle (EV) industry places the requirement for the plan of EV deployment. For public EV, existing models mainly focus on the charging facility design and fail to capture the multi-modal scenarios. In this work, we develop an agent-based decision-support system for multi-modal electric transits to locate the optimal combinations of key parameters, including the fleet size, the transit schedule, the charging facility design, and the routing strategy. We demonstrate the utilities of our system by simulating public EV services deployed to serve travel needs related to a transportation hub in New York City. To support the decision of the fleet size, we summarize system-level performances including the total satisfied demand, passengers' waiting time, vehicle idling time. The spatial and temporal patterns are extracted to serve a deeper understanding of system dynamics and service quality. Finally, we investigate the interaction between the fleet size design and the routing strategy. The results suggest a necessity of integrating the operation strategies into the planning phase.

32 ENERGY CONSERVATION, CONSUMPTION, AND UTILIZATI↗

Real-time Ridesharing for Transportation Hubs with Demand and Supply Uncertainty

Transportation hubs in major cities generate a significant amount of trips by taxis and for-hail vehicles (FHV), with many of the trips sharing similar destinations. This suggests promising opportunities to leverage the collective travel needs with dedicated ridesharing solutions to reduce the externalities of excessive traffic at transportation hubs. In this study, we develop a novel dynamic ridesharing approach to serve trips from the transportation hub by considering (1) demand (new passengers) and supply (newly available vehicles) in the near future and (2) the uncertainty of future predictions. Our approach consists of two stages. In the first stage, we develop a data structure called hub mobility tree to generate potential combinations of shareable trips as candidate schedules efficiently. Then the generated schedules are used in the second stage to formulate the stochastic hub-based ridesharing problem (SHRP), which is a stochastic integer programming problem with the objective to maximize the total expected ridesharing profit over time. Due to the prohibitive number of shareable trips, we then approximately solve SHRP by the sample average approximate method (SAA), and a dual Lagrangian technique is implemented to further improve the scalability of the solution approach. We demonstrate the performances of the proposed method by simulating the ridesharing service at JFK airport using NYC taxi and FHV data. The results indicate that the proposed method outperforms the myopic ridesharing (maximize profit for a single time step) and the rolling horizon method with point estimation of future demand and supply.

dynamic ridesharing↗

Online Energy-optimal Routing for Electric Vehicles with Combinatorial Multi-arm Semi-Bandit

We have seen a rapid growth in the adoption of electric vehicle in today’s commercial mobility service market, from carrying passengers to the delivery of goods. One cardinal issue concerning the operation of EVs is the optimal routing of EV fleets with limited battery capacity. In this study, we investigate the energy-optimal online routing problem for the fleet of EVs, which focuses on identifying real-time minimum electricity consumption paths (MECP) for multiple OD pairs with limited information. We develop a multi-OD combinatorial multi-arm semi-bandit model (MCMAB) that uses the fleet of EVs as sensors in the transportation network and promotes the utilization of common information shared by different OD pairs. We further enrich the model with the path elimination policy to obtain MECP of high confidence while significantly reducing the number of learning iterations and the number of explorations needed. We demonstrate the effectiveness of the MCMAB and the efficiency of the path elimination policy with comprehensive numerical experiments in Manhattan, NYC. The results show that the proposed online routing algorithms can achieve near-optimal MECPs efficiently, and the quality of the solutions is significantly better than using the shortest travel time paths as approximate MECPs.

Chen, Xiaowei↗

Deciphering the Stress State of Seismogenic Faults in Oklahoma and Southern Kansas Based on an Improved Stress Map

Fault location and geometry are prime considerations in the reactivation of preexisting faults. Here, we combine relocated earthquake catalogs and focal mechanisms to delineate seismogenic faults in Oklahoma and southern Kansas and analyze their stress state. Initially, we identify and map seismogenic faults based on earthquake clustering. We then obtain an improved stress map using 2,047 high-quality focal mechanisms. The regional stress map shows a gradual transition from oblique normal faulting in western Oklahoma to strike-slip faulting in central and eastern Oklahoma. Stress amplitude ratio shows a strong correlation with pore pressure from hydrogeologic models, suggesting that pore pressure exhibits a measurable influence on stress patterns. Finally, we assess fault stress state via 3-D Mohr circles; a parameter understress is used to quantify the level of fault criticality (with 0 meaning critically stressed faults and 1 meaning faults with no applied shear stress). Our findings suggest that most active faults have near vertical planes (planarity >0.8 and dip >70°), and there is a strong correlation between fault length and maximum magnitude on each fault. The fault trends show prominent conjugate sets that strike [55–75°] and [105–125°]. A comparison with mapped sedimentary faults and basement fractures reveals common tectonic control. Based on 3-D Mohr circles, we find that 78% of the faults are critically stressed (understress ≤0.2), while several seismogenic faults are misoriented with high understress (>0.4). Fault geometry and local stress fields may be used to evaluate potential seismic hazard, as the largest earthquakes tend to occur on long, critically stressed faults.

58 GEOSCIENCES↗

Pore-pressure diffusion, enhanced by poroelastic stresses, controls induced seismicity in Oklahoma

Induced seismicity linked to geothermal resource exploitation, hydraulic fracturing, and wastewater disposal is evolving into a global issue because of the increasing energy demand. Moderate to large induced earthquakes, causing widespread hazards, are often related to fluid injection into deep permeable formations that are hydraulically connected to the underlying crystalline basement. Using injection data combined with a physics-based linear poroelastic model and rate-and-state friction law, we compute the changes in crustal stress and seismicity rate in Oklahoma. This model can be used to assess earthquake potential on specific fault segments. The regional magnitude–time distribution of the observed magnitude (M) 3+ earthquakes during 2008–2017 is reproducible and is the same for the 2 optimal, conjugate fault orientations suggested for Oklahoma. At the regional scale, the timing of predicted seismicity rate, as opposed to its pattern and amplitude, is insensitive to hydrogeological and nucleation parameters in Oklahoma. Poroelastic stress changes alone have a small effect on the seismic hazard. However, their addition to pore-pressure changes can increase the seismicity rate by 6-fold and 2-fold for central and western Oklahoma, respectively. The injection-rate reduction in 2016 mitigates the exceedance probability of M5.0 by 22% in western Oklahoma, while that of central Oklahoma remains unchanged. A hypothetical injection shut-in in April 2017 causes the earthquake probability to approach its background level by ∼2025. We conclude that stress perturbation on prestressed faults due to pore-pressure diffusion, enhanced by poroelastic effects, is the primary driver of the induced earthquakes in Oklahoma.

58 GEOSCIENCES↗

Scientific Exploration of Induced SeisMicity and Stress (SEISMS)

Several major fault-drilling projects have captured the interseismic and postseismic periods of earthquakes. However, near-field observations of faults immediately before and during an earthquake remain elusive due to the unpredictable nature of seismicity. The Scientific Exploration of Induced SeisMicity and Stress (SEISMS) workshop met in March 2017 to discuss the value of a drilling experiment where a fault is instrumented in advance of an earthquake induced through controlled fluid injection. The workshop participants articulated three key issues that could most effectively be addressed by such an experiment: (1) predictive understanding of the propensity for seismicity in reaction to human forcing, (2) identification of earthquake nucleation processes, and (3) constraints on the factors controlling earthquake size. A systematic review of previous injection experiments exposed important observational gaps in all of these areas. The participants discussed the instrumentation and technological needs as well as faults and tectonic areas that are feasible from both a societal and scientific standpoint.

58 GEOSCIENCES↗