Search NASA⌕ Search

Engineering topics

Chen, Yang

Publications and source records attributed to Chen, Yang.

At least 19 records
All sourcesNASA NTRSDOE OSTI
DOE OSTI2026

Cloud-Based Demonstration of the Eastern Interconnection Situational Awareness Monitoring System (ESAMS)

This report describes a cloud-based implementation and field demonstration of the Eastern Interconnection Situational Awareness and Monitoring System (ESAMS). ESAMS was developed to support the detection and source localization of forced oscillations using synchrophasor measurements from tie-lines connecting areas served by different reliability coordinators (RCs), so that RCs could better coordinate their response to wide-area events. A previous effort had identified deployment barriers associated with hosting shared situational awareness tools at a single RC. To address these barriers, ESAMS was migrated to Amazon Web Services and evaluated in a six-month field demonstration. ISO New England (ISO-NE) and PJM streamed data to the platform using AWS Direct Connect and a site-to-site VPN, respectively. The resulting multi-utility measurement footprint enabled regional source localization across major portions of the U.S. Eastern Interconnection and supported routine identification of oscillation events. During the final three months of the trial, 24 events above 2 MW/MVAR were detected. The largest detected oscillation approached a 25 MW peak-to-peak amplitude, and the longest persisted intermittently for more than 11 hours. The demonstration also assessed operational considerations—including data transfer volumes, end-to-end latency, and cloud computing costs—and found that network and compute requirements were modest relative to typical cloud capabilities while providing performance comparable to prior on-premises deployments. Overall, the results indicate that cloud hosting can provide a practical path to shared interconnection-wide oscillation monitoring. The cloud ESAMS demonstration establishes a foundation for broader utility participation and for building future wide-area analytics that leverage measurements across organizational boundaries.

Follum, James D.↗
DOE OSTI2024

Global burned area increasingly explained by climate change

Fire behaviour is changing in many regions worldwide. However, nonlinear interactions between fire weather, fuel, land use, management and ignitions have impeded formal attribution of global burned area changes. Here, in this work, we demonstrate that climate change increasingly explains regional burned area patterns, using an ensemble of global fire models. The simulations show that climate change increased global burned area by 15.8% (95% confidence interval (CI) [13.1–18.7]) for 2003–2019 and increased the probability of experiencing months with above-average global burned area by 22% (95% CI [18–26]). In contrast, other human forcings contributed to lowering burned area by 19.1% (95% CI [21.9–15.8]) over the same period. Moreover, the contribution of climate change to burned area increased by 0.22% (95% CI [0.22–0.24]) per year globally, with the largest increase in central Australia. Our results highlight the importance of immediate, drastic and sustained GHG emission reductions along with landscape and fire management strategies to stabilize fire impacts on lives, livelihoods and ecosystems.

54 ENVIRONMENTAL SCIENCES↗
DOE OSTI2024

Improving North American Wildfire Prediction by Integrating a Machine-Learning Fire Model in a Land Surface Model

Wildfires have shown increasing trends in both frequency and severity across the Contiguous United States (CONUS). However, process-based fire models have difficulties in accurately simulating the burned area over the CONUS due to a simplification of the physical process and cannot capture the interplay among fire, ignition, climate, and human activities. The deficiency of burned area simulation deteriorates the description of fire impact on energy balance, water budget, and carbon fluxes in the Earth System Models (ESMs). Alternatively, machine learning (ML) based fire models, which capture statistical relationships between the burned area and environmental factors, have shown promising burned area predictions and corresponding fire impact simulation. We develop a hybrid framework (ML4Fire-XGB) that integrates a pretrained eXtreme Gradient Boosting (XGBoost) wildfire model with the Energy Exascale Earth System Model (E3SM) land model (ELM) version 2.1. A Fortran-C-Python deep learning bridge is adapted to support online communication between ELM and the ML fire model. Specifically, the burned area predicted by the ML-based wildfire model is directly passed to ELM to adjust the carbon pool and vegetation dynamics after disturbance, which are then used as predictors in the ML-based fire model in the next time step. Evaluated against the historical burned area from Global Fire Emissions Database 5 from 2001-2020, the ML4Fire-XGB model outperforms process-based fire models in terms of spatial distribution and seasonal variations. Sensitivity analysis confirms that the ML4Fire-XGB well captures the responses of the burned area to rising temperatures. The ML4Fire-XGB model has proved to be a new tool for studying vegetation-fire interactions, and more importantly, enables seamless exploration of climate-fire feedback, working as an active component in E3SM.

54 ENVIRONMENTAL SCIENCES↗
DOE OSTI2024

PV Generation and Load Forecasting for Adjuntas PR Community Microgrids

Existing frameworks to forecast time-series photovoltaic (PV) output power and consumer load for microgrid operations and controls assume a near-continuous availability of real-time input features from the field assets such as PV inverters, energy meters, and weather station. These incoming data points are used to periodically retrain models and update forecast snapshots over a moving horizon window, be it one hour-ahead, one-day ahead, or one-week ahead. However, such frameworks are not resilient to disruptions in data availability caused by losses in communications between the field sensors and data loggers. Hence, there is a need for programs that assume no availability of real-time microgrid asset data and still make reliable forecasts that can be used for decision-making. Such programs would be apt to function in extreme weather events such as hurricanes and would use lightweight recursive time-series models to independently forecast solar irradiance and ambient temperature, then compute PV power from those forecasts, as well as independently forecast consumer load. The codebase performs forecasting for the scenario of when the microgrid does not have a reliable access to forecasts or real-time observations of solar irradiance (I) and ambient temperature (AT) and load (Load) to be able to adequately forecast, in real-time, the PV power production or a business' load. In this case, using historical values of PV power and load, a univariate forecasting of generation and consumption are respectively made. The use-case in particular has two sub-scenarios: one, a normal 7-day ahead forecast where the unavailability of real-time data is assumed due to infrastructure issues such as loss of communication or sensor maintenance or service downtimes. Whereas a hurricane-caused unavailability of real-time data requires a second model trained specifically on historical hurricane days to be able to capture the extreme day behavior of generation in particular, and load if applicable. A gradient boosted regression tree comprises an ensemble of additive models that map between the input of historical values (be it irradiance, temperature, or load) and their corresponding output forecasts of a given horizon such that the individual learner predictions are summed up over the total number of such learners in the ensemble to produce an aggregate forecast. A weighting mechanism is applied to the training data in each iteration, where actual and forecast values are compared to penalize incorrect forecasts by increasing the weight and reducing it to reward correct forecasts. The code's benefits are that it: (a) accounts for a contingency where communication loss renders newly measured real-time data unavailable for model tuning and snapshot updates; (b) presents blind forecasting that recursively determines the next time-step value in a horizon using the forecast of the same attribute from a prior step; and (c) employs lightweight models that, once trained, can reliably generalize for different horizons, which make them suitable for enhancing the resilience of field microgrids prone to extreme events that encounter disruptions to data availability.

Sundararajan, Aditya [Oak Ridge National Laborator↗
DOE OSTI2024

A Mixed Integer Linear Programming-basedDistributed Energy Management for Three-phaseUnbalanced Active Distribution Network

A mixed integer linear programming (MILP)–baseddistributed energy management for three-phase unbalancedactive distribution network is proposed. Modern distributionnetworks have becoming more and more active with increasingdeployment of microgrids, distributed energy resources (DERs)as well as controllable loads. Considering various ownership andcontrol models of microgrids, DERs and controllable loads, adistributed energy management was formulated using the alternatingdirection method of multipliers (ADMM) algorithm. ByADMM, the distribution management system (DMS) and theseactive components are coordinated through price signals, whichare adjusted according to the generation-load mismatch per nodeper phase. To enable resolution of the ADMM-based distributedoptimization using more accessible and popular MILP solver,different linearization techniques were proposed to linearize theaugmented Lagrangian terms and other nonlinear terms. Resultsof case studies on a three-phase active distribution network withthree microgrids and several DERs and controllable loads validatedthe effectiveness of proposed MILP-based distributed energymanagement. In addition, the capability of proposed method inmitigating phase power unbalance has been demonstrated.

Liu, Guodong↗
DOE OSTI2023

Multi-Agent Simulation Based Framework for Power Restoration Time Estimation at Distribution Level

The growing frequency of power outages has prompted increased interest in developing a more resilient power grid that can quickly recover from weather-related damage. At the distribution level, power restoration is a complex, multi-stage process involving multiple response entities. Providing utility stakeholders, government regulators, and the public with information about outage duration and estimated time to restoration is crucial. The research employs a multi-agent simulation approach, which allows for the simulation of decision-making behaviors among different entities and the incorporation of various uncertainties. Specifically, the study uses the open-source simulation package Mesa-Geo in conjunction with the Python language and constructs a road network using the open-source network extension pgRouting for routing queries. The research design includes several experiments focused on Florida as a case study, comparing repair crew sizes, power outage numbers, and road damage scenarios. The findings could offer valuable managerial guidance on resource allocation in the restoration process.

Chen, Yang↗
DOE OSTI2023

Mycorrhizal feedbacks influence global forest structure and diversity

One mechanism proposed to explain high species diversity in tropical systems is strong negative conspecific density dependence (CDD), which reduces recruitment of juveniles in proximity to conspecific adult plants. Although evidence shows that plant-specific soil pathogens can drive negative CDD, trees also form key mutualisms with mycorrhizal fungi, which may counteract these effects. Across 43 large-scale forest plots worldwide, we tested whether ectomycorrhizal tree species exhibit weaker negative CDD than arbuscular mycorrhizal tree species. We further tested for conmycorrhizal density dependence (CMDD) to test for benefit from shared mutualists. We found that the strength of CDD varies systematically with mycorrhizal type, with ectomycorrhizal tree species exhibiting higher sapling densities with increasing adult densities than arbuscular mycorrhizal tree species. Moreover, we found evidence of positive CMDD for tree species of both mycorrhizal types. Collectively, these findings indicate that mycorrhizal interactions likely play a foundational role in global forest diversity patterns and structure.

59 BASIC BIOLOGICAL SCIENCES↗
DOE OSTI2023

Evaluating Recursive Blind Forecast Against API and Baseline: A Puerto Rican Case Study on Solar Irradiance for Normal and Extreme Weather

This paper leverages ongoing work in a community microgrid in Adjuntas, Puerto Rico to forecast global horizontal irradiance (GHI) and compare performance in normal and extreme weather. Given a positive correlation of 0.98 between GHI and PV power, forecasting GHI can be an effective, indirect forecast of photovoltaic (PV) power, especially in microgrids where the end-users, owners, operators, or other stakeholders are reluctant to share data for training or validation due to privacy and security concerns. A recursive one-shot (termed as "blind") forecast is, hence, formulated, wherein a gradient-boosted regression tree (GBR) is built to forecast GHI for a 7-day horizon in normal weather, and a 2-day horizon in extreme weather. To demonstrate its resilience, the architecture is trained on normal and hurricane weather GHI from 2002-2022. It is generalized on February 9-16, 2023, and on the landfall of Hurricane Nicole (Nov 4-5, 2022), respectively. Forecasts from GBR are compared against that from a satellite-based API resource and three baselines: persistence, averaging, and exponential smoothing. Results show GBR and persistence outperform sophisticated API in both types of weather for this case study.

Sundararajan, Aditya↗
DOE OSTI2023

Predictive Analytics for Hydropower Fleet Intelligence

A primary challenge in hydropower industry is the ability to maintain cost-competitiveness, reliability, and security of hydropower assets through evolving power system contexts and aging of the fleet. Maintaining cost-effective and reliable operations under these conditions is expected to require new modernization and maintenance paradigms for changing contexts. Changes in existing practices for O&M will require an understanding of the current state and health of hydropower assets, and the impact of changing paradigms on asset health and reliability. The Hydropower Fleet Intelligence project is developing and evaluating standardized methodologies and analysis tools for data-driven asset reliability and management technologies for hydropower, leading to eventual predictive maintenance planning, repair/replacement decision making, and asset-reliability and cost-optimized operations. A key question is the feasibility of using existing data sets at hydropower facilities to perform assessments of asset reliability. This document uses data from hydropower facilities to assess the potential for using available analytics methods for asset reliability estimates. In addition to reliability assessments, the feasibility of using existing analytics techniques for several other potential applications is discussed. Finally, a case study that a data-driven model is trained to learn nominal operations via vibration data from an asset of a certain plant, and then utilized to identify anomalies on a similar asset from a different plant, highlighting the generic use of proposed Prognostics and Health Management (PHM) approaches.

Yucesan, Yigit↗
DOE OSTI2023

A Hybrid Physics-Based, Data-Driven Approach to Model Damage Accumulation in Corrosion of Polymeric Adhesives

The degradation of polymeric adhesives in dissimilar joints is a menace to electric and structural components of the automotive industry. In polymeric adhesives, failure often occurs due to damage accumulated from discrete environmental sources—thermal degradation, oxidation, hydrolysis, radiation, and moisture—that are combined with progressive damage mechanisms, such as aging and fatigue. Because most damage mechanisms that lead to degradation act in parallel, the estimation of the lifetime of a polymeric material becomes a significant reliability issue, no study currently exists that can simultaneously consider even two of these phenomena. Most current efforts are directed toward a single-phenomenon, single-model approach in which a model is developed to cover one specific damage mechanism. While this approach is advantageous in exploring single mechanisms, it is strongly inconclusive for degradation that occurs by multiple damage mechanisms. Our team plans to take a fresh perspective by designing a hybrid constitutive/data-driven approach that allows models of different damage mechanisms to be integrated into one model and then used to explore the degradation-induced failure of polymeric adhesives. The theoretical-computational part of this work is divided into four research components as described in the Approach section below.

36 MATERIALS SCIENCE↗
DOE OSTI2023

A Mixed integer linear programming‐based distributed energy management for networked microgrids considering network operational objectives and constraints

Abstract Mixed integer linear programming (MILP)–based distributed energy management for networked microgrids embedded modern distribution systems is proposed. Considering the diverse ownership of microgrids, distributed energy resources (DERs) that interface directly with utilities and responsive loads, an alternating direction method of multipliers–based distributed framework was formulated for the scheduling of networked microgrids embedded modern distribution systems by adjusting nodal price signals iteratively. In addition, to make the formulated optimization problems resolvable through more accessible and popular MILP solvers, different linearisation techniques were employed to transform the nonlinear terms into linear or mixed integer linear formats. The proposed MILP‐based distributed method preserves all participants' autonomy (e.g., microgrids, DERs that interface directly with utilities and responsive loads), while incentivising them to actively participate in the distribution system operation with price signals. The proposed method is validated with results of numerical simulation using a modern distribution system consisting of multiple networked microgrids, DERs that interface directly with utilities, as well as responsive loads.

24 POWER TRANSMISSION AND DISTRIBUTION↗
DOE OSTI2023

Integrated Modeling and Optimal Operation of Multi-Energy System for Coastal Community

Focusing on remote, isolated, and underserved communities, a multi-energy system is designed in this research which is capable of utilizing different energy sources in a more coordinated and energy-efficient way to support various demands, such as fresh water, electricity, hydrogen, thermal demand, etc. The energy sources considered are renewables (wind, solar, marine) and natural gas. The energy conversion process includes water desalination, gas combustion, water electrolyzation, and different types of storage (hydrogen tank, electricity, thermal, etc.) are designed to serve as buffers in supply-demand balancing. Sets of experiments are designed to demonstrate the effectiveness of the proposed operating model and investigate the impact of uncertainties from renewable generations and demands.

Chen, Yang↗
DOE OSTI2023

Distributed Energy Management for Networked Microgrids with Hardware-in-the-Loop Validation

For the cooperative operation of networked microgrids, a distributed energy management considering network operational objectives and constraints is proposed in this work. Considering various ownership and privacy requirements of microgrids, utility directly interfaced distributed energy resources (DERs) and demand response, a distributed optimization is proposed for obtaining optimal network operational objectives with constraints satisfied through iteratively updated price signals. The alternating direction method of multipliers (ADMM) algorithm is utilized to solve the formulated distributed optimization. The proposed distributed energy management provides microgrids, utility-directly interfaced DERs and responsive demands the opportunity of contributing to better network operational objectives while preserving their privacy and autonomy. Results of numerical simulation using a networked microgrids system consisting of several microgrids, utility directly interfaced DERs and responsive demands validate the soundness and accuracy of the proposed distributed energy management. The proposed method is further tested on a practical two-microgrid system located in Adjuntas, Puerto Rico, and the applicability of the proposed strategy is validated through hardware-in-the-loop (HIL) testing.

24 POWER TRANSMISSION AND DISTRIBUTION↗
DOE OSTI2023

A Physics-Based Data-Driven Approach for Modeling of Environmental Degradation in Elastomers

Abstract Elastomers are now commonly used in a number of industries, including aerospace, structure, transportation, shipbuilding, and automotive, due to their excellent workability, formability, and flexibility. During their activity, elastomers are subjected to harsh environmental conditions, which decreases their resilience. False predictions made early in their lives can have major financial and environmental implications. Elastomers’ performance and properties, such as strength, durability, and density, are influenced by chemical changes in these materials, known as degradation, which occurs over time. This process can alter the morphology of a polymer matrix as well as cause chain scission and cross-linking, resulting in different behaviors than that of the unaged material. To demonstrate the effect of thermaloxidative aging on the mechanical behavior of elastomers, several experimental and theoretical models have been proposed. In view of the large volume of experimental data available on micro-structural evolution in the course of aging, we propose a physics-based data-driven approach to overcome the shortcomings of both phenomenological and micro-mechanical models. This work presents a novel thermodynamically consistent, multiagent machine-learned model for predicting the constitutive behavior of cross-linked elastomers during environmental aging, such as thermo-oxidative and hydrolytic aging for various states of deformation. Single mechanism degradation changes the polymer matrix over time where it is causing chain scission, reduction of cross-links, and morphology change. To capture the idealized Mullins effect and permanent set due to the effect of single aging mechanisms on nonlinear mechanical responses of elastomers, we propose a data-driven model for simulating inelastic elements in a polymer matrix. By using a sequential order reduction, we were able to reduce the 3D stress-strain tensor mapping problem to a small number of super-constrained 1D mapping problems. To systematically classify such mapping problems into a few categories, an assembly of multiple replicated conditional neural network learning agents (L-agents) is used based on our recent work. Each category is represented by a different type of agent. The effect of deformation history, aging time, and aging temperature is captured by this model. The model is validated using a broad collection of data, ranging from our experimental results to data from the literature. In addition, thermodynamic consistency and frame independence are investigated. The most significant achievements of this model are its precision, simplicity, and prediction of inelasticity under various states of deformation. The model’s accuracy and simplicity make it a good option for commercial and industrial applications. Conveniently, due to the model modular nature, it can be expanded in the future to include viscoelasticity and non-isotropic formation for better precision.

Ghaderi, Aref↗
DOE OSTI2023

Effects of the heat source on the steady-state transport in gradient-driven global gyrokinetic simulations

Heat sources are routinely used in gradient-driven global gyrokinetic simulations to prevent profile relaxation and ensure steady-state turbulence and transport. To have any predictive capability, gradient-driven simulations need to be insensitive to the particular choice of a source. Several forms of the heat source are investigated using gyrokinetic δf particle-in-cell simulations. The ion heat flux is found to be sensitive to the source strength when the source rate is below a fraction (∼1/10) of the linear growth rate.

Physics↗
DOE OSTI2023

Effect of kinetic ions on the toroidal double-tearing modes

We investigate the effects of kinetic ions on double-tearing modes (DTMs) using the gyrokinetic particle-in-cell simulation code GEM with a gyrokinetic ion/fluid electron hybrid model. It is found that the ion kinetic effects can decrease the growth rate of the DTMs. This effect is more significant for stronger coupling of DTMs with smaller distance between the rational surfaces. Kinetic ions can also enhance the coupling effect between the two rational surfaces. Energy transfer analyses between particles and wave fields show that the stabilizing effect of kinetic ions comes mainly from the perpendicular magnetic drift of ions in the coupling region and around the outer rational surface.

Physics↗