Search NASA⌕ Search

Engineering topics

Cheng, Rui

Publications and source records attributed to Cheng, Rui.

Generalized Analytical Estimation of Sensitivity Matrices in Unbalanced Distribution Networks

Fast and accurate estimation of sensitivity matrices is significant for the enhancement of distribution system modeling and automation. Analytical estimations have mainly focused on voltage magnitude sensitivity to active/reactive power injections for unbalanced networks with Wye-connected loads and neglecting DERs' smart inverter functionality. Hence, this paper enhances the scope of analytical estimation of sensitivity matrices for unbalanced networks with 1- Φ, 2- Φ, and 3- Φ Delta/Wye-connected loads, DERs with smart inverter functionality, and substation/line step-voltage regulators (SVR). A composite bus model comprising of DER, Delta- and Wye-connected load is proposed to represent a generic distribution bus, which can be simplified to load, PV, or voltage-controlled bus as required. Furthermore, the proposed matrix-based analytical method consolidates voltage magnitude and angle sensitivity to active/reactive power injection and tap-position of all SVRs into a single algorithm. Extensive case studies on IEEE and EPRI networks show the accuracy and wide scope of the proposed algorithm compared to the existing benchmark method.

24 POWER TRANSMISSION AND DISTRIBUTION↗

Analytical Large-Signal Modeling of Inverter-Based Microgrids With Koopman Operator Theory for Autonomous Control

The microgrid (MG) plays a crucial role in the energy transition, but its nonlinearity presents a significant challenge for large-signal power systems studies in the electromagnetic transient (EMT) time scale. In this paper, we develop a large-signal linear MG model that considers the detailed dynamics of the primary and zero-control levels based on the Koopman operator (KO) theory. Firstly, a set of observable functions is carefully designed to capture the nonlinear dynamics of the MG. The corresponding linear KO is then analytically derived based on these observables, resulting in the linear representation of the original nonlinear MG with observables as the new coordinate. The influence of external input on the system dynamics is also considered during the derivation, enabling control of the MG. We solve the voltage control problem using the traditional linear quadratic integrator (LQI) method to demonstrate that textbook linear control techniques can accurately control the original nonlinear MG via the developed KO-linearized MG model. Our proposed KO linearization method is generic and can be easily extended for different control objectives and MG structures using our analytical derivation procedure. Here, we validate the effectiveness of our methodology through various case studies.

25 ENERGY STORAGE↗

Data-Driven Affinely Adjustable Robust Volt/VAr Control

Recent years have seen the increasing proliferation of distributed energy resources with intermittent power outputs, posing new challenges to the voltage management in distribution networks. To this end, this paper proposes a data-driven affinely adjustable robust Volt/VAr control (AARVVC) scheme, which modulates the smart inverter’s reactive power in an affine function of its active power, based on the voltage sensitivities with respect to real/reactive power injections. To achieve a fast and accurate estimation of voltage sensitivities, we propose a data-driven method based on deep neural network (DNN), together with a rule-based bus-selection process using the bidirectional search method. Our method only uses the operating statuses of selected buses as inputs to DNN, thus significantly improving the training efficiency and reducing information redundancy. Finally, a distributed consensus-based solution, based on the alternating direction method of multipliers (ADMM), for the AARVVC is applied to decide the inverter’s reactive power adjustment rule with respect to its active power. Only limited information exchange is required between each local agent and the central agent to obtain the slope of the reactive power adjustment rule, and there is no need for the central agent to solve any (sub)optimization problems. Finally, numerical results on the modified IEEE-123 bus system validate the effectiveness and superiority of the proposed data-driven AARVVC method.

24 POWER TRANSMISSION AND DISTRIBUTION↗

Interfacial stabilization for inverted perovskite solar cells with long-term stability

Perovskite solar cells (PSCs) commonly exhibit significant performance degradation due to ion migration through the top charge transport layer and ultimately metal electrode corrosion. Here, we demonstrate an interfacial management strategy using a boron chloride subphthalocyanine (Cl 6 SubPc)/fullerene electron-transport layer, which not only passivates the interfacial defects in the perovskite, but also suppresses halide diffusion as evidenced by multiple techniques, including visual element mapping by electron energy loss spectroscopy. As a result, we obtain inverted PSCs with an efficiency of 22.0% (21.3% certified), shelf life of 7000 h, Τ 80 of 816 h under damp heat stress (compared to less than 20 h without Cl 6 SubPc), and initial performance retention of 98% after 2000 h at 80 °C in inert environment, 90% after 2034 h of illumination and maximum power point tracking in ambient for encapsulated devices and 95% after 1272 h outdoor testing ISOS-O-1. Our strategy and results pave a new way to move PSCs forward to their potential commercialization solidly.

14 SOLAR ENERGY↗

Relating Convection to GCM Grid-Scale Fields Using Cloud-Resolving Model Simulation of a Squall Line Observed during MC3E Field Experiment

In this study, a WRF (Weather Research and Forecasting) model is used as a cloud-resolving model to simulate a squall line observed on 20 May 2011 in the Southern Great Plains (SGP) of the United States. The model output is then used to examine the relationships between convective precipitation and coarse-grained variables averaged over a range of subdomain sizes equivalent to various global climate model horizontal resolutions. The objective is to determine to what extent convection within the subdomains can be related to these “large-scale” variables, thus that they can potentially serve as closure in convective parameterization. Results show that convective precipitation is well correlated with the vertical velocity at 500 hPa, column integrated moisture convergence and CAPE change due to large-scale advective forcing (dCAPE) for various subdomain sizes, but the correlation decreases with decreasing subdomain size. dCAPE leads convective precipitation for all subdomain sizes examined; however, the lead time decreases with decreasing subdomain size. Moisture convergence leads convective precipitation for subdomain sizes greater than 32 km but has no lead time for smaller subdomain sizes. Mid-tropospheric vertical velocity has no lead time or slightly lags convective precipitation. The lead/lag composite analysis with respect to maximum precipitation time indicates that peaks of large-scale variables increase with decreasing subdomain size. The peaks of 500 hPa vertical velocity and column integrated moisture convergence occur at the same time as maximum precipitation, but maximum dCAPE leads maximum precipitation by twelve minutes.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Experiments on bright-field and dark-field high-energy electron imaging with thick target material

High-energy charged particle radiography has been used for diagnostics of high-energy density matter, and electrons can serve as a promising radiographic probe that acts as a complement to commonly used proton probes. Here we report on an electron radiography experiment using 45 MeV electrons from an S-band photoinjector, where scattered electrons, after interacting with a sample, are collected and imaged by a quadrupole imaging system. We achieve a spatial resolution of a few microns (similar to 4 μm) and a thickness resolution of a few percent for a silicon target of 300-600 μm in thickness. With additional dark-field images captured by selecting electrons with large scattering angles, we show that complementary information for determining external details such as outlines, boundaries and defects can be obtained.

Zhou, Zheng↗

Stable dielectric, elastic, and piezoelectric properties of Yb3+:CNGS crystals at high temperature

Highlights: • Single crystals Yb:CNGS with high quality have been successfully grown using the Czochralski method. • The dielectric, elastic and piezoelectric coefficients are measured and calculated according to the impedance method. • Piezoelectricity and dielectric properties at room temperature and elevated temperature are investigated for the first time. • The doped crystals show good temperature stability at elevated temperature condition. - Abstract: In this study, Yb{sup 3+}:Ca{sub 3}NbGa{sub 3}Si{sub 2}O{sub 14} (Yb{sup 3+}:CNGS) single crystals with different doping concentrations (2 and 5 at%) were grown using the Czochralski method. The dielectric, elastic, and piezoelectric coefficients at room temperature and elevated temperature were measured and calculated according to the impedance method for the first time. Crystals show excellent piezoelectricity and exhibit favorable temperature stability from room temperature to 800 °C. The transmittance spectrum of the Yb{sup 3+}:CNGS crystals is also recorded, and the results prove the high optical quality of these crystals.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗

Areal density and spatial resolution of high energy electron radiography

Ultrafast imaging tools are of great importance for determining the dynamic density distribution in high energy density (HED) matter. In this work, we designed a high energy electron radiography (HEER) system based on a linear electron accelerator to evaluate its capability for imaging HED matter. 40 MeV electron beams were used to image an aluminum target to study the density resolution and spatial resolution of HEER. The results demonstrate a spatial resolution of tens of micrometers. The interaction of the beams with the target and the beam transport of the transmitted electrons are further simulated with EGS5 and PARMELA codes, with the results showing good agreement with the experimental resolution. Furthermore, the experiment can be improved by adding an aperture at the Fourier plane.

areal density resolution↗

Phased Acoustic Array Measurements of a 5.75 Percent Hybrid Wing Body Aircraft

Detailed acoustic measurements of the noise from the leading-edge Krueger flap of a 5.75 percent Hybrid Wing Body (HWB) aircraft model were recently acquired with a traversing phased microphone array in the AEDC NFAC (Arnold Engineering Development Complex, National Full Scale Aerodynamics Complex) 40- by 80-Foot Wind Tunnel at NASA Ames Research Center. The spatial resolution of the array was sufficient to distinguish between individual support brackets over the full-scale frequency range of 100 to 2875 Hertz. For conditions representative of landing and take-off configuration, the noise from the brackets dominated other sources near the leading edge. Inclusion of flight-like brackets for select conditions highlights the importance of including the correct number of leading-edge high-lift device brackets with sufficient scale and fidelity. These measurements will support the development of new predictive models.

Krueger noise↗

Metal–semiconductor transition in atomically thin Bi{sub 2}Sr{sub 2}Co{sub 2}O{sub 8} nanosheets

Two-dimensional layered materials have attracted considerable attention since the discovery of graphene. Here we demonstrate that the layered Bi{sub 2}Sr{sub 2}Co{sub 2}O{sub 8} (BSCO) can be mechanically exfoliated into single- or few-layer nanosheets. The BSCO nanosheets with four or more layers display bulk metallic characteristics, while the nanosheets with three or fewer layers have a layer-number-dependent semiconducting characteristics. Charge transport in bilayer or trilayer BSCO nanosheets exhibits Mott 2D variable-range-hopping (VRH) conduction throughout 2 K–300 K, while the charge transport in monolayers follows the Mott-VRH law above a crossover temperature of 75 K, and is governed by Efros and Shklovskii-VRH laws below 75 K. Disorder potentials and Coulomb charging both contribute to the transport gap of these nanodevices. Our study reveals a distinct layer number-dependent metal-to-semiconductor transition in a new class of 2D materials, and is of great significance for both fundamental investigations and practical devices.

36 MATERIALS SCIENCE↗