Engineering topics

Cheng, Shaobo

Publications and source records attributed to Cheng, Shaobo.

11 records

DOE OSTI2023

Pressure-induced charge orders and their postulated coupling to magnetism in hexagonal multiferroic LuFe 2 O 4

Hexagonal LuFe 2 O 4 is a promising charge order (CO) driven multiferroic material with high charge and spin-ordering temperatures. The coexisting charge and spin orders on Fe 3+ /Fe 2+ sites result in magnetoelectric behaviors, but the coupling mechanism between the charge and spin orders remains elusive. Here, by tuning external pressure, we reveal three charge-ordered phases with suggested correlation to magnetic orders in LuFe 2 O 4 : (i) a centrosymmetric incommensurate three-dimensional CO with ferrimagnetism, (ii) a non-centrosymmetric incommensurate quasi-two-dimensional CO with ferrimagnetism, and (iii) a centrosymmetric commensurate CO with antiferromagnetism. Experimental in situ single-crystal X-ray diffraction and X-ray magnetic circular dichroism measurements combined with density functional theory calculations suggest that the charge density redistribution caused by pressure-induced compression in the frustrated double-layer [Fe 2 O 4 ] cluster is responsible for the correlated spin-charge phase transitions. The pressure-enhanced effective Coulomb interactions among Fe-Fe bonds drive the frustrated (1/3, 1/3) CO to a less frustrated (1/4, 1/4) CO, which induces the ferrimagnetic to antiferromagnetic transition. Our results not only elucidate the coupling mechanism among charge, spin, and lattice degrees of freedom in LuFe 2 O 4 , but also provide a new way to tune the spin-charge orders in a highly controlled manner.

36 MATERIALS SCIENCE↗

DOE OSTI2022

Revealing the dynamics of the alloying and segregation of Pt-Co nanoparticles via in-situ environmental transmission electron microscopy

Thermal treatment is a general and efficient way to synthesize intermetallic catalysts and may involve complicated physical processes. So far, the mechanisms leading to the size and composition heterogeneity, as well as the phase segregation behavior in Pt-Co nanoparticles (NPs) are still not well understood. Here, via in-situ environmental transmission electron microscopy, the formation dynamics and segregation behaviors of Pt-Co alloyed NPs during the thermal treatment were investigated. It is found that Pt-Co NPs on zeolitic imidazolate frameworks-67-derived nanocarbon (NC) are formed consecutively through both particle migration coalescence and the Ostwald ripening process. The existence of Pt NPs is found to affect the movement of Co NPs during their migration. With the help of theoretical calculations, the correlations between the composition and migration of the Pt and Co during the ripening process were uncovered. Herein, these complex alloying processes are revealed as key factors leading to the heterogeneity of the synthesized Pt-Co alloyed NPs. Under oxidation environment, the Pt-Co NPs become surface faceted gradually, which can be attributed to the oxygen facilitated relatively higher segregation rate of Co from the (111) surface. This work advances the fundamental understanding of design, synthesis, and durability of the Pt-based nanocatalysts.

36 MATERIALS SCIENCE↗

DOE OSTI2022

Self‐Assembled LuFeO 3 /LuFe 2 O 4 Heterostructure with Emergent Ferroic Orderings

Abstract Achieving self‐assembling structures that exhibit emergent properties and functionalities is one of the holy grails in nanotechnology and holds great promise for a wide range of potential applications. Herein, a self‐assembled LuFeO 3 –(1/3)LuFe 2 O 4 –LuFeO 3 heterostructure that consists of two model multiferroics, i.e., hexagonal LuFeO 3 and rhombohedral LuFe 2 O 4 , is reported in single‐layer epitaxial LuFeO 3 thin films. Atomic‐scale electron microscopy investigations reveal the spontaneous organization of ferroelectric polarization in each building block, which forms a series of polar configurations. Specifically, the charge and lattice of neighboring LuFeO 3 and LuFe 2 O 4 blocks are closely coupled with competing degrees of freedom. A combination of the quantitative analysis of atomically resolved images and spectroscopy with theoretical calculations determines how charge‐ordering‐induced polarization accommodates charge naturality across the interfaces to reduce the system energy and unravels the formation mechanism of this heterostructure. The results point to the possibilities of generation and control of multiferroic self‐assembled systems, which may provide a basis for engineering novel materials with emergent properties.

Deng, Shiqing↗

DOE OSTI2022

Composition-dependent ordering transformations in Pt–Fe nanoalloys

Significance Dynamically understanding the microscopic processes governing ordering transformations has rarely been attained. The situation becomes even more challenging for nanoscale alloys, where the significantly increased surface-area-to-volume ratio not only opens up a variety of additional freedoms to initiate an ordering transformation but also allows for kinetic interplay between the surface and bulk due to their close proximity. We provide direct evidence of the microscopic processes controlling the ordering transformation through the surface–bulk interplay in Pt–Fe nanoalloys and new features rendered by variations in alloy composition and chemical stimuli. These results provide a mechanistic detail of ordering transformation phenomena which are widely relevant to nanoalloys as chemical ordering occurs in most multicomponent materials under suitable environmental bias.

25 ENERGY STORAGE↗

DOE OSTI2022

Reconfigurable perovskite nickelate electronics for artificial intelligence

Reconfigurable devices offer the ability to program electronic circuits on demand. Here, in this work, we demonstrated on-demand creation of artificial neurons, synapses, and memory capacitors in post-fabricated perovskite NdNiO 3 devices that can be simply reconfigured for a specific purpose by single-shot electric pulses. The sensitivity of electronic properties of perovskite nickelates to the local distribution of hydrogen ions enabled these results. With experimental data from our memory capacitors, simulation results of a reservoir computing framework showed excellent performance for tasks such as digit recognition and classification of electrocardiogram heartbeat activity. Using our reconfigurable artificial neurons and synapses, simulated dynamic networks outperformed static networks for incremental learning scenarios. The ability to fashion the building blocks of brain-inspired computers on demand opens up new directions in adaptive networks.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗

DOE OSTI2021

Exploring the Spatial Control of Topotactic Phase Transitions Using Vertically Oriented Epitaxial Interfaces

Engineering oxygen vacancy formation and distribution is a powerful route for controlling the oxygen sublattice evolution that affects diverse functional behavior. The controlling of the oxygen vacancy formation process is particularly important for inducing topotactic phase transitions that occur by transformation of the oxygen sublattice. Here we demonstrate an epitaxial nanocomposite approach for exploring the spatial control of topotactic phase transition from a pristine perovskite phase to an oxygen vacancy-ordered brownmillerite (BM) phase in a model oxide La 0.7 Sr 0.3 MnO 3 (LSMO). Incorporating a minority phase NiO in LSMO films creates ultrahigh density of vertically aligned epitaxial interfaces that strongly influence the oxygen vacancy formation and distribution in LSMO. Combined structural characterizations reveal strong interactions between NiO and LSMO across the epitaxial interfaces leading to a topotactic phase transition in LSMO accompanied by significant morphology evolution in NiO. Using the NiO nominal ratio as a single control parameter, we obtain intermediate topotactic nanostructures with distinct distribution of the transformed LSMO-BM phase, which enables systematic tuning of magnetic and electrical transport properties. The use of self-assembled heterostructure interfaces by the epitaxial nanocomposite platform enables more versatile design of topotactic phase structures and correlated functionalities that are sensitive to oxygen vacancies.

36 MATERIALS SCIENCE↗

DOE OSTI2021

Atomic Structure Evolution of Pt–Co Binary Catalysts: Single Metal Sites versus Intermetallic Nanocrystals

Due to their exceptional catalytic properties for the oxygen reduction reaction (ORR) and other crucial electrochemical reactions, PtCo intermetallic nanoparticle (NP) and single atomic (SA) Pt metal site catalysts have received considerable attention. However, their formation mechanisms at the atomic level during high-temperature annealing processes remain elusive. Furthermore, the thermally driven structure evolution of Pt–Co binary catalyst systems is investigated using advanced in situ electron microscopy, including PtCo intermetallic alloys and single Pt/Co metal sites. The pre-doping of CoN 4 sites in carbon supports and the initial Pt NP sizes play essential roles in forming either Pt 3 Co intermetallics or single Pt/Co metal sites. Importantly, the initial Pt NP loadings against the carbon support are critical to whether alloying to L1 2 -ordered Pt 3 Co NPs or atomizing to SA Pt sites at high temperatures. High Pt NP loadings (e.g., 20%) tend to lead to the formation of highly ordered Pt 3 Co intermetallic NPs with excellent activity and enhanced stability toward the ORR. In contrast, at a relatively low Pt loading (<6 wt%), the formation of single Pt sites in the form of PtC 3 N is thermodynamically favorable, in which a synergy between the PtC 3 N and the CoN 4 sites could enhance the catalytic activity for the ORR, but showing insufficient stability.

36 MATERIALS SCIENCE↗

DOE OSTI2021

Interplay between charge ordering and geometric ferroelectricity in LuFe 2 O 4 /LuFeO 3 superlattices

Oxide superlattices have drawn great attentions owing to the intriguing coupling among elastic, electrical, and magnetic orderings at the interfaces and the emerging of improper ferroelectricity. Here, superlattices composed of hexagonal LuFeO 3 (h-LuFeO 3 ) and LuFe 2 O 4 are investigated via density functional theory calculations. h-LuFeO 3 is a well-known multiferroic material that is stable only in thin-film or doped bulk state, while LuFe 2 O 4 is a charge ordered material where the existence of ferroelectricity is still in controversy. We have found that the charge ordering (CO) induced polarizations in LuFe 2 O 4 layers coexist with the geometric polarizations in h-LuFeO 3 layers in the (LuFe 2 O 4 ) m /(LuFeO 3 ) n superlattices with different periodicities, and the ferroelectric states are generally preferred over the antiferroelectric states for LuFe 2 O 4 in superlattices. The out-of-plane polarizations in h-LuFeO 3 and LuFe 2 O 4 layers tend to be aligned in parallel, and the overall polarization increases with the ratio of h-LuFeO 3 . The influence of layered polarizations on the local electrostatic potential is not significant except the detected small trend caused by the CO-induced polarization within a FeO bilayer. Besides, the local electronic structures show that the Fermi level position in a certain layer can be tuned by the valences of Fe in this layer and the polarization distributions in neighboring layers. LuFe 2 O 4 layers sandwiched between thick h-LuFeO 3 layers are more susceptible. The calculated configurations of the superlattices are supported by atomic-resolution transmission electron microscopy experiments. Our results pave a way for tunable ferroelectricity in superlattice systems and create a new playground for manipulating the coupling between various degrees of freedom.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗

DOE OSTI2021

Inherent stochasticity during insulator–metal transition in VO 2

Vanadium dioxide (VO 2 ), which exhibits a near-room-temperature insulator–metal transition, has great potential in applications of neuromorphic computing devices. Although its volatile switching property, which could emulate neuron spiking, has been studied widely, nanoscale studies of the structural stochasticity across the phase transition are still lacking. In this study, using in situ transmission electron microscopy and ex situ resistive switching measurement, we successfully characterized the structural phase transition between monoclinic and rutile VO 2 at local areas in planar VO 2 /TiO 2 device configuration under external biasing. After each resistive switching, different VO 2 monoclinic crystal orientations are observed, forming different equilibrium states. We have evaluated a statistical cycle-to-cycle variation, demonstrated a stochastic nature of the volatile resistive switching, and presented an approach to study in-plane structural anisotropy. Furthermore, our microscopic studies move a big step forward toward understanding the volatile switching mechanisms and the related applications of VO 2 as the key material of neuromorphic computing.

36 MATERIALS SCIENCE↗

DOE OSTI2021

Coexistence and Coupling of Multiple Charge Orderings and Spin States in Hexagonal Ferrite

The coupling between charge and spin orderings in strongly correlated systems plays a crucial role in fundamental physics and device applications. As a candidate of multiferroic materials, LuFe 2 O 4 with a nominal Fe 2.5+ valence state has the potential for strong charge–spin interactions; however, these interactions have not been fully understood until now. Here, combining complementary characterization methods with theoretical calculations, two types of charge orderings with distinct magnetic properties are revealed. The ground states of LuFe 2 O 4 are decided by the parallel/antiparallel coupling of both charge and spin orderings in the adjacent FeO double layers. Whereas the ferroelectric charge ordering remains ferrimagnetic below 230 K, the antiferroelectric ordering undergoes antiferromagnetic–ferrimagnetic–paramagnetic transitions from 2 K to room temperature. This study demonstrates the unique aspects of strong spin-charge coupling within LuFe 2 O 4 . Our results shed light on the coexistence and competing nature of orderings in quantum materials.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗

DOE OSTI2021

Cation and anion topotactic transformations in cobaltite thin films leading to Ruddlesden-Popper phases.

Topotactic transformations involve structural changes between related crystal structures due to a loss or gain of material while retaining a crystallographic relationship. The perovskite oxide La0.7Sr0.3CoO3 (LSCO) is an ideal system for investigating phase transformations due to its high oxygen vacancy conductivity, relatively low oxygen vacancy formation energy, and strong coupling of the magnetic and electronic properties to the oxygen stoichiometry. While the transition between cobaltite perovskite and brownmillerite (BM) phases has been widely reported, further reduction beyond the BM phase lacks systematic studies. In this paper, we study the evolution of the physical properties of LSCO thin films upon exposure to highly reducing environments. We observe the rarely reported crystalline Ruddlesden-Popper phase, which involves the loss of both oxygen anions and cobalt cations upon annealing where the cobalt is found as isolated Co ions or Co nanoparticles. First-principles calculations confirm that the concurrent loss of oxygen and cobalt ions is thermodynamically possible through an intermediary BM phase. The strong correlation of the magnetic and electronic properties to the crystal structure highlights the potential of utilizing ion migration as a basis for emerging applications such as neuromorphic computing.

Chiu, I-Ting↗