Search NASA⌕ Search

Engineering topics

Cheng, Wen-Hui

Publications and source records attributed to Cheng, Wen-Hui.

Apparatus and systems for incorporating effective transparent catalyst for photoelectrochemical application

Photoelectrochemical (PEC) technology for the conversion of solar energy into chemicals may require cost-effective photoelectrodes to efficiently and stably drive anodic and/or cathodic half-reactions to complete the overall reactions for storing solar energy in chemical bonds. Apparatus and systems incorporating effectively transparent metal catalysts enable the design and/or implementation of PEC devices for light harvesting. Triple-junction photocathodes with the triangular catalyst grids are provided to improve the efficiency of the photocathodes to generate renewable fuel from sunlight.

Cheng, Wen-Hui↗

PEC Performance Measures from Literature Reports

This dataset is a capture of PEC experimental performance metrics data aggregated from publications and included here in the measurement and format provided by the authors. The measurements captured are based on rate of hydrogen production by PEC devices under illumination. Original creator of this dataset: Wen-Hui (Sophia) Cheng (National Cheng Kung University) Contributors to this dataset: Joel Ager (LBNL), H. Nishiyama et al. (Meiji University), I. Holmes-Gentle (EPFL), Yanfa Yan (University of Toledo), Aditya Mohite (Rice University), Zetian Mi (University of Michigan).

08 HYDROGEN↗

Controlling Valley-Specific Light Emission from Monolayer MoS 2 with Achiral Dielectric Metasurfaces

Excitons in two-dimensional transition metal dichalcogenides have a valley degree of freedom that can be optically manipulated for quantum information processing. Here, we integrate MoS 2 monolayers with achiral silicon disk array metasurfaces to enhance and control valley-specific absorption and emission. Through the coupling to the metasurface electric and magnetic Mie modes, the intensity and lifetime of the emission of neutral excitons, trions, and defect bound excitons can be enhanced and shortened, respectively, while the spectral shape can be modified. Additionally, the degree of polarization (DOP) of exciton and trion emission from the valley can be symmetrically enhanced at 100 K. The DOP increase is attributed to both the metasurface-enhanced chiral absorption of light and the metasurface-enhanced exciton emission from the Purcell effect. Finally, combining Si-compatible photonic design with large-scale 2D materials integration, our work makes an important step toward on-chip valleytronic applications approaching room-temperature operation.

2D materials↗

Hydrogen from Sunlight and Water: A Side-by-Side Comparison between Photoelectrochemical and Solar Thermochemical Water-Splitting

Photoelectrochemical (PEC) and solar thermochemical (STCH) water-splitting represent two promising pathways for direct solar hydrogen generation. PEC water-splitting integrates multiple functional materials and utilizes energetic electrons and holes generated from sunlight to produce hydrogen and oxygen in two half-reactions, while STCH water-splitting couples a series of consecutive chemical reactions and uses absorbed heat from sunlight to generate hydrogen and oxygen in two full reactions. In this Focus Review, the basic operating principles, sunlight utilization, device architecture, reactor design, instantaneous and annually averaged solar-to-hydrogen (STH) conversion efficiency, and the operating conditions and constraints of both pathways are compared. A side-by-side comparison addresses some common sources of confusion and misinterpretation, especially in the evaluation of STH conversion efficiencies, and reveals distinct features and challenges in both PEC and STCH technologies. Furthermore, this Focus Review also addresses materials and device challenges in PEC and STCH for cost-competitive hydrogen generation.

08 HYDROGEN↗

Ultrafast hot-hole injection modifies hot-electron dynamics in Au/p-GaN heterostructures

A fundamental understanding of hot-carrier dynamics in photo-excited metal nanostructures is needed to unlock their potential for photodetection and photocatalysis. Despite numerous studies on the ultrafast dynamics of hot electrons, so far, the temporal evolution of hot holes in metal-semiconductor heterostructures remains unknown. Here, we report ultrafast (t < 200 fs) hot-hole injection from Au nanoparticles into the valence band of p-type GaN. The removal of hot holes from below the Au Fermi level is observed to substantially alter the thermalization dynamics of hot electrons, reducing the peak electronic temperature and the electron-phonon coupling time of the Au nanoparticles. First-principles calculations reveal that hot-hole injection modifies the relaxation dynamics of hot electrons in Au nanoparticles by modulating the electronic structure of the metal on timescales commensurate with electron-electron scattering. Overall, these results advance our understanding of hot-hole dynamics in metal-semiconductor heterostructures and offer additional strategies for manipulating the dynamics of hot carriers on ultrafast timescales. Photo-excited gold nanoparticles are shown to provide ultrafast and efficient hot-hole injection to the valence band of p-type GaN, substantially altering hot-electron dynamics in the nanoparticles and forming a basis to design hot-hole-based optoelectronics.

36 MATERIALS SCIENCE↗

Si Microwire-Array Photocathodes Decorated with Cu Allow CO 2 Reduction with Minimal Parasitic Absorption of Sunlight

High loadings of Cu were integrated on the light-facing side of Si microwire arrays used under simulated sunlight for the photoelectrochemical reduction of CO 2 (aq) to hydrocarbons in 0.10 M KHCO 3 (aq). Radial-junction n + p-Si microwire arrays decorated with Cu exhibited absolute photocurrent densities comparable to an uncovered Si surface. Moreover, with respect to a Cu foil electrode, the positive shift in the onset potential for hydrocarbon formation at n + p-Si/Cu microwire arrays was equal to or greater than the photovoltage of the semiconductor alone. Selective electrodeposition of Cu on the tips and sidewalls of Si microwires was responsible for the minimal parasitic reflection and absorption exhibited by the catalyst, such that light-limited, absolute current densities >25 mA·cm –2 were sustained for 48 h under simulated sunlight. Photoelectrodes prepared from semiconductors with low diode quality factors and electrocatalysts with large Tafel slopes are shown to benefit from increased microstructured surface area. Si microwire arrays are thus suitable for photoelectrochemical reactions requiring high loadings of metallic and reflective electrocatalysts.

25 ENERGY STORAGE↗

Optical Excitation of a Nanoparticle Cu/p-NiO Photocathode Improves Reaction Selectivity for CO 2 Reduction in Aqueous Electrolytes

We report the light-induced modification of catalytic selectivity for photoelectrochemical CO 2 reduction in aqueous media using copper (Cu) nanoparticles dispersed onto p-type nickel oxide (p-NiO) photocathodes. Optical excitation of Cu nanoparticles generates hot electrons available for driving CO 2 reduction on the Cu surface, while charge separation is accomplished by hot-hole injection from the Cu nanoparticles into the underlying p-NiO support. Photoelectrochemical studies demonstrate that optical excitation of plasmonic Cu/p-NiO photocathodes imparts increased selectivity for CO 2 reduction over hydrogen evolution in aqueous electrolytes. Specifically, we observed that plasmon-driven CO 2 reduction increased the production of carbon monoxide and formate, while simultaneously reducing the evolution of hydrogen. Our results demonstrate an optical route toward steering the selectivity of artificial photosynthetic systems with plasmon-driven photocathodes for photoelectrochemical CO 2 reduction in aqueous media.

25 ENERGY STORAGE↗

Hot Hole Collection and Photoelectrochemical CO 2 Reduction with Plasmonic Au/p-GaN Photocathodes

Harvesting nonequilibrium hot carriers from plasmonic- metal nanostructures offers unique opportunities for driving photo- chemical reactions at the nanoscale. Despite numerous examples of hot electron-driven processes, the realization of plasmonic systems capable of harvesting hot holes from metal nanostructures has eluded the nascent field of plasmonic photocatalysis. In this work, we fabricate gold/p-type gallium nitride (Au/p-GaN) Schottky junctions tailored for photoelectrochemical studies of plasmon-induced hot-hole capture and conversion. Despite the presence of an interfacial Schottky barrier to hot-hole injection of more than 1 eV across the Au/p-GaN heterojunction, plasmonic Au/p-GaN photocathodes exhibit photoelectrochemical properties consistent with the injection of hot holes from Au nanoparticles into p- GaN upon plasmon excitation. The photocurrent action spectrum of the plasmonic photocathodes faithfully follows the surface plasmon resonance absorption spectrum of the Au nanoparticles and open-circuit voltage studies demonstrate a sustained photovoltage during plasmon excitation. Comparison with Ohmic Au/p-NiO heterojunctions confirms that the vast majority of hot holes generated via interband transitions in Au are sufficiently hot to inject above the 1.1 eV interfacial Schottky barrier at the Au/p-GaN heterojunction. We further investigated plasmon-driven photoelectrochemical CO 2 reduction with the Au/p-GaN photocathodes and observed improved selectivity for CO production over H 2 evolution in aqueous electrolytes. Taken together, our results offer experimental validation of photoexcited hot holes more than 1 eV below the Au Fermi level and demonstrate a photoelectrochemical platform for harvesting hot carriers to drive solar-to-fuel energy conversion.

36 MATERIALS SCIENCE↗

Joint contributions of Ag ions and oxygen vacancies to conducting filament evolution of Ag/TaO{sub x}/Pt memory device

The electroforming and resistive switching behaviors in the Ag/TaO{sub x}/Pt trilayer structure are investigated under a continual change of temperatures between 300 K and 100 K to distinguish the contributions of Ag ions and oxygen vacancies in developing of conducting filaments. For either electroforming or resistive switching, a significantly higher forming/set voltages is needed as the device is operated at 100 K, as compared to that observed when operating at 300 K. The disparity in forming/set voltages of Ag/TaO{sub x}/Pt operating at 300 K and 100 K is attributed to the contribution of oxygen vacancies, in addition to Ag atoms, in formation of conducting filament at 100 K since the mobilities of oxygen vacancies and Ag ions become comparable at low temperature. The presence of oxygen vacancy segment in the conducting filament also modifies the reset current from a gradually descending behavior (at 300 K) to a sharp drop (at 100 K). Furthermore, the characteristic set voltage and reset current are irreversible as the operation temperature is brought from 100 K back to 300 K, indicating the critical role of filament constituents on the switching behaviors of Ag/oxide/Pt system.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗