Engineering topics
Publications and source records attributed to Cheshire, Michael C..
Subsurface formations provide vast resource for energy generation, energy storage, and carbon sequestration. Sustainable energy generation from shale oil/gas and integrity of longterm storage necessitate understanding fluid behavior in nanoporous geomedia (e.g., shale caprock) under dynamic pressure conditions.
Slides for a presentation about various newly observed fluid behaviors, particularly in the shale industry, given at a Texas A&M University seminar.
Explore the source record for details and available documents.
Not Available
Industrial rare earth element (REE) separations predominantly utilize solvent extraction processes tailored toward conventional resources such as bastnäsite, monazite, and ion adsorption clays. Advances in diglycolamide (DGA) chemistry have shown effective extraction characteristics for REE separations. However, limitations associated with traditional DGA solvent extraction techniques, such as third-phase formation and gelling, have hindered commercial viability. By supporting DGA extractants on porous resins such as polystyrene divinyl benzene (PS-DVB), the desirable combination of solvent extraction selectivity and ease of operation of sorbent columns can be achieved. To design a low-cost model for such solid-supported DGAs, extraction characteristics as influenced by the underlying coordination chemistry must be explored to achieve efficient functional systems. Within this study, we report novel DGA resin materials, each incorporating one of the DGAs N,N,N’,N’-tetra-(1-octyl)-3-oxapentane-1,5-diamide (TODGA), N,N'-dimethyl-N,N'-dioctyl-3-oxapentane-1,5-diamide (DMDODGA), and 2,2'-oxybis(1-(3-(((2-ethylhexyl)thio)methyl)-4-methylpyrrolidin-1-yl)ethan-1-one) (DEHPDGA). The affinity of DGAs across the lanthanide (Ln) series was evaluated for both hydrochloric acid and nitric acid media with varying Ln feed concentrations to study distribution ratios and loading characteristics. Focusing on dysprosium, extended X-Ray Absorption Fine Structure (EXAFS) and density functional theory (DFT) calculations were also utilized to explore coordination chemistry and their effects on ligand performance. The general trend for both acid media resulted in DMDODGA having the highest extraction strength of all three DGAs at varying acid concentrations. Coordination-chemistry analysis supported by loading data, DFT calculations, and EXAFS results under forced loading conditions posited less than the expected 3:1 ligand-to-metal coordination.
Feldspars are the most abundant minerals in the Earth’s crust, and are also important constituents of many lunar rocks and some stony meteorites. Albite (NaAlSi 3 O 8 ) makes up the sodium corner of the feldspar ternary diagram (KAlSi 3 O 8 - NaAlSi 3 O 8 – CaAl 2 Si 2 O 8 ) and connects the alkali-feldspar and plagioclase binary joins. Synthesis of albite, however, has long been a problem, even at high temperatures and even at high pressures when dry. In fact, most successful syntheses require the combination of high-pressure, high-temperature, and hydrothermal environments. Here, this paper presents a sol–gel method of albite synthesis that requires hydrothermal processing followed by high-temperature recrystallization, but no high-pressure environments. This has the advantage of allowing synthesis of relatively large amounts of material and controlled elemental substitutions.
The coordination of crystalline products resulting from the co-crystallization of Np(VI), Pu(VI), Am(VI), and Np(V) with uranyl nitrate hexahydrate (UNH) has been revealed through solid-state spectroscopic characterization via diffuse reflectance UV-Vis-NIR spectroscopy, SEM-EDS, and extended X-ray absorption fine structure (EXAFS) spectroscopy. Density functional and multireference wavefunction calculations were performed to analyze the An(VI/V)O 2 (NO 3 ) 2 ·2H 2 O electronic structures and to help assign the observed transitions in the absorption spectra. EXAFS show a similar coordination between the U(VI) in UNH and Np(VI) and Pu(VI); while Am resulted in a similar coordination to Am(III), as reduction of Am(VI) occurred prior to EXAFS data being obtained. Finally, the co-crystallization of the oxidized transuranic species—penta- and hexavalent—with UNH, represents a significant advance from not only a practical standpoint in providing an elegant solution for used nuclear fuel recycle, but also as an avenue to expand the fundamental understanding of the 5f electronic behavior in the solid-state.
The coordination of crystalline products resulting from the co-crystallization of Np(VI), Pu(VI), Am(VI), and Np(V) with uranyl nitrate hexahydrate (UNH) has been revealed through solid-state spectroscopic characterization via diffuse reflectance UV-Vis-NIR, SEM-EDS, and extended X-ray absorption fine structure (EXAFS). Density functional and multireference wavefunction calculations were performed to analyze the An(VI/V)O 2 (NO 3 ) 2 ·2H 2 O electronic structures and to help assign the observed transitions in the absorption spectra. EXAFS show a similar coordination between the U(VI) in UNH and Np(VI) and Pu(VI); while Am resulted in a similar coordination to Am(III), as reduction of Am(VI) occurred prior to EXAFS data being obtained. Here, the co-crystallization of the oxidized transuranic species—penta- and hexavalent—with UNH, represents a significant advance from not only a practical standpoint in providing an elegant solution for used nuclear fuel recycle, but also as an avenue to expand the fundamental understanding of the 5f electronic behavior in the solid-state.
Replacement reactions commonly alter the multiscale pore structures of rocks during fluid-rock interactions. Analysis of these processes in various model fluid-rock systems during controlled laboratory experiments provides insights into the origins of microstructures found in natural materials. This study focused on understanding the effects of initial starting material permeability and resultant differences in transport pathways on porosity and mineralogical changes during limestone dolomitization.A series of replacement experiments (32–317 days in duration) have been conducted in which 1.59 cm (5/8 in.) diameter cores of two different limestones were reacted with saturated MgCl2 solutions at 200 °C. The Texas Cream (Austin Chalk) is a high-porosity, high-permeability limestone, whereas both the porosity and permeability of the Carthage Marble (Burlington Limestone) are relatively low. Altered limestones were imaged using scanning electron microscopy with energy-dispersive X-ray spectroscopy (SEM-EDX), Time-of-Flight Secondary Ion Mass Spectrometry (ToF–SIMS) and electron microprobe analysis (EMPA). A representative grain boundary of the low-porosity limestone was targeted for a focused ion beam (FIB) lift-out and characterized using transmission electron microscopy (TEM). These results were coupled with analyses of radial changes in the porosity distribution of the core derived from X-ray and neutron small- and ultra-small angle scattering ((U)SANS/(U)SAXS).The high-porosity/permeability limestone showed a four times faster bulk replacement rate than the lower-porosity/permeability material, and a different mechanism of porosity development. For the low-porosity limestone, a two-stage replacement occurred, with the reacted region of the core consisting of an inner rim in which the limestone was replaced by two calcite-dolomite solid solutions, and an outer rim in which the dolomite was replaced by magnesite. Elongated pores formed along grain boundaries at the initial limestone/dolomite reaction interface, and additional nanometer-scale porosity was formed at the secondary magnesite replacement rim. Grain boundaries were identified as preferential pathways for transport leading to dolomitization and a grain boundary diffusion rate was calculated based on microstructural characterization. In contrast, replacement in the high-porosity limestone was accompanied by porosity generation through replacement of individual grains by dolomite throughout the sample and, in longer runs, magnesite in outer parts of the core. These observations emphasize that both the mechanisms of the replacement reaction and the microstructure and chemistry of the replaced product are contingent on the initial structure of the starting material.
Deep, underground repositories are needed to isolate radioactive waste from the biosphere. Because bentonite is an integral component of many multibarrier repository systems, information on the hydraulic behavior of bentonite is crucial for modeling the long-term viability of such systems. In this paper the hydraulic behavior of bentonite samples was analyzed as a function of aggregate size, and samples were subjected to hydrothermal treatments involving contact with NaCl, KCl, and deionized water. Neutron and X-ray imaging were used to quantify water sorption into packed bentonite samples and bentonite swelling into the water column. The distance between the original clay-water interface and the wetting front was determined as a function of time. Average water uptake exhibited a square-root-of-time dependence in freshly prepared samples, but more variable rates were observed for samples previously in contact with water. The radiography was supported by small-angle neutron scattering analysis and ultra-small-angle neutron scattering analysis of aggregate size distributions and by inelastic neutron scattering to understand the physicochemical environment of the sorbed water. Results showed that hydrothermal treatment with KCl had the greatest effect of increased water transport in the bentonite, possibly as a result of the interaction of K + with smectite layers in the clay.
Weathering plays a crucial role in a number of environmental processes, and the microstructure and evolution of multi-scale pore space is a critically important factor in the weathering of geological formations. In igneous rocks the infiltration of meteoric water into initially relatively dry material can cause the rock to begin to disaggregate, increasing porosity and surface area, and allowing further disaggregation and weathering to occur. These processes, in turn, allow biota to colonize the rock, further enhancing the weathering rate. In some igneous rocks this may be driven by oxidation of primary minerals. One such mineral, biotite, has been repeatedly mentioned as a cause of cracking during oxidation. However, the scale-dependence of the processes by which this occurs are poorly understood. We cannot, therefore, accurately extrapolate laboratory reaction rates to the field in predictive numerical models. In order to better understand the effects of oxidation and test the hypothesis that fracture and disaggregation are initiated by swelling of oxidizing biotites, we reacted granite cores in a selenic acid-rich aqueous solution at 200°C for up to 438 days. Elevated temperatures and selenic acid were used to provide relatively fast reaction rates and highly oxidizing conditions in sealed reaction vessels. These experiments were analyzed using a combination of imaging, X-ray diffraction, Mössbauer spectroscopy, and small- and ultra-small angle neutron scattering to interrogate porosity and microfracture formation. The experimental results show little observable biotite swelling, but significant transport and growth of iron oxides and/or clays along grain boundaries throughout the sample. Significant increases in porosity were also observed at the sample rim, likely associated with feldspar alteration. Fractures and transport were observed throughout the core, suggesting that stresses due to crystallization pressures caused by the growing iron phases may be the initiating factors in granite weathering, possibly followed by biotite swelling after sufficient permeability is achieved.
Ce-bastnäsite is the single largest mineral source for light rare-earth elements. In view of the growing industrial importance of rare-earth minerals, it is critical to develop more efficient methods for separating the valuable rare-earth-containing minerals from the surrounding gangue. In this work, we employ a combination of periodic density functional theory (DFT) and molecular mechanics (MM) calculations together with the de novo molecular design program HostDesigner to identify bis-phosphinate ligands that preferentially bind to the (100) Ce-bastnäsite surface rather than the (104) calcite surface. DFT calculations for a simple phosphinate ligand were employed to qualitatively understand key behaviors involved in ligand–metal, ligand–solvent, and solvent–metal interactions. These insights were then used to guide the search for flexible, rigid, and semirigid hydrocarbon linkers to identify candidate bis-phosphinate ligands with the potential to bind preferentially to Ce-bastnäsite. Among the five most promising bis-phosphinate ligands suggested by theoretical studies, three ligands were synthesized and their adsorption characteristics to bastnäsite (100) interfaces were characterized using vibrational sum-frequency (vSFG) spectroscopy, attenuated total reflectance Fourier transform infrared (ATR-FTIR) spectroscopy, and isothermal titration calorimetry (ITC). The efficacy of the selective interfacial molecular binding was demonstrated by identifying a bis-phosphinate ligand capable of providing an overall higher surface coverage of alkyl groups relative to a monophosphinate ligand. The results highlight the interplay between adsorption binding strength and maximum surface coverage in determining ligand efficiency to render the mineral surface hydrophobic. DFT calculations further indicate that all tested ligands have higher affinity for Ce-bastnäsite than for calcite. Finally, this is consistent with the ITC data showing stronger adsorption enthalpy to bastnäsite than to calcite, making these ligands promising candidates for selective flotation of Ce-bastnäsite.