Search NASA⌕ Search

Engineering topics

Chisel, D. M.

Publications and source records attributed to Chisel, D. M..

9 records
All sourcesNASA NTRSDOE OSTI
NASA NTRS1977

Comparative performance of silicon and gallium arsenide solar cells on a high altitude sounding rocket

The use of sounding rockets for calibrating solar cells offers two principal advantages: (1) there is no effect due to the terrestrial atmosphere, and (2) the cells are recoverable immediately after the calibration. On March 30, 1976, 29 n/p silicon and four p/n gallium arsenide solar cells were calibrated in space and successfully recovered from a NASA-Astrobee F rocket that reached a peak altitude of 230 km. Approximately 75 IV characteristic curves were generated for 32 of the cells to an accuracy of plus or minus 0.2 ma and plus or minus 0.2 mV.

Thomas, N. L.↗
NASA NTRS1976

A real-time control system with video feedback for sounding rocket payloads

NASA/Ames has developed a command system to control the attitude of a rocket payload from a ground-based site. The SPARCS command system allows a ground-based operator to adjust the attitude of a solar experiment in real time. The attitude relative to the desired target features on the sun is monitored visually from the ground through a video link using an on-board TV camera. The system has demonstrated rapid acquisition of solar features, resulting in a more optimal usage of the data gathering time of a sounding rocket payload, and has located solar features which could not be precisely located from preflight data.

Matsumoto, T.↗
NASA NTRS1976

Optical tools and techniques for aligning solar payloads with the SPARCS control system

The success of a rocket-borne experiment depends not only on the pointing of the attitude control system, but on the alignment of the attitude control system to the payload. To ensure proper alignment, special optical tools and alignment techniques are required. Those that were used in the SPARCS program are described and discussed herein. These tools include theodolites, autocollimators, a 38-cm diameter solar simulator, a high-performance 1-m heliostat to provide a stable solar source during the integration of the rocket payload, a portable 75-cm sun tracker for use at the launch site, and an innovation called the Solar Alignment Prism. Using the real sun as the primary reference under field conditions, the Solar Alignment Prism facilitates the coalignment of the attitude sun sensor with the payload. The alignment techniques were developed to ensure the precise alignment of the solar payloads to the SPARCS attitude sensors during payload integration and to verify the required alignment under field conditions just prior to launch.

Thomas, N. L.↗
NASA NTRS1975

Space calibration of standard solar cells using high altitude sounding rockets

Four photovoltaic cells were space calibrated and successfully recovered from a NASA Aerobee rocket launched on Sept. 18, 1974, which reached a peak altitude of 251 km. The experiment was comprised of four 2 ohm-cm n/p cells, two of which are optically filtered with 0.6 to 0.9 micron bandpass filters. The short-circuit current agreed to within 4% of the laboratory calibration. The variation of cell output due to atmospheric attenuation between the altitude range 80 and 251 km was 0.4% for the unfiltered cells.

Thomas, N. L.↗
NASA NTRS1975

High altitude calibration of solar cells using rockets

The use of sounding rockets for calibrating solar cells offers two principal advantages: there is no effect due to the terrestrial atmosphere and the cells are recoverable immediately after calibration. Four n/p photovoltaic cells were calibrated in space and successfully recovered from a NASA Aerobee rocket that reached a peak altitude of 251 km. Two of the cells were optically filtered with 0.6 to 0.9-micron bandpass filters. The short-circuit current agreed to within 4% of the laboratory calibration; variation of cell output due to atmospheric attenuation in the altitude range of 80 to 251 km was 0.4% for the unfiltered cells.

Thomas, N. L.↗
NASA NTRS1973

Experimental study on optimization parameters of a supersonic jet ejector thrust augmentor.

The experimental data were aimed at obtaining the effect of jet mixing, the effective length/diameter of the ejector tube, the entrance length shape factor, the shape loading, and the optimum primary jet location. The total augmented thrust is proportional to the diameter of the ejector. The data show that for a practical design the entrance lip shape and the stream lines around the lip are also important in order to optimize the percentage augmentation.

Cheng, D. Y.↗
NASA NTRS1973

Test stand for precise measurement of impulse and thrust vector of small attitude control jets

A test stand which accurately measures the impulse bit and thrust vector of reaction jet thrusters used in the attitude control system of space vehicles has been developed. It can be used to measure, in a vacuum or ambient environment, both impulse and thrust vector of reaction jet thrusters using hydrazine or inert gas propellants. The ballistic pendulum configuration was selected because of its accuracy, simplicity, and versatility. The pendulum is mounted on flexure pivots rotating about a vertical axis at the center of its mass. The test stand has the following measurement capabilities: impulse of 0.00004 to 4.4 N-sec (0.00001 to 1.0 lb-sec) with a pulse duration of 0.5 msec to 1 sec; static thrust of 0.22 to 22 N (0.05 to 5 lb) with a 5 percent resolution; and thrust angle alinement of 0.22 to 22 N (0.05 to 5 lb) thrusters with 0.01 deg accuracy.

Woodruff, J. R.↗