Search NASA⌕ Search

Engineering topics

Chiu, Wilson K. S.

Publications and source records attributed to Chiu, Wilson K. S..

At least 19 records

Three-dimensional imaging of grain boundaries via quantitative fluorescence X-ray tomography analysis

Abstract Three-dimensional visualization of material composition within multiple grains and across complex networks of grain boundaries at nanoscales can provide new insight into the structure evolution and emerging functional properties of the material for diverse applications. Here, using nanoscale scanning X-ray fluorescence tomography, coupled with an advanced self-absorption correction algorithm developed in this work, we analyze the three-dimensional gain distributions and compositions in a Ce 0.8 Gd 0.2 O 2-δ -CoFe 2 O 4 mixed ionic-electronic conductor system with high accuracy and statistical significance. Our systematic investigation reveals an additional emergent phase and uncovers highly intriguing composition stability ranges for the multiple material phases within this system. The presented visualization of composition variations across complex interfaces, supported by our quantitative composition analysis, discloses mechanistic pathways of the diverse phase transformations occurring in the material synthesis, providing insights for the optimization of transport properties in the mixed ionic-electronic conductor system.

36 MATERIALS SCIENCE↗

In Situ Determination of Speciation and Local Structure of NaCl–SrCl 2 and LiF–ZrF 4 Molten Salts

Understanding the local environment of the metal atoms in salt melts is important for modeling the properties of melts and predicting their behavior and thus helping enable the development of technologies such as molten salt reactors and solar-thermal power systems and new approaches to recycling rare-earth metals. Toward that end, we have developed an in situ approach for measuring the coordination of metals in molten salt coupling X-ray absorption spectroscopy (XAS) and Raman spectroscopy. Our approach was demonstrated for two salt mixtures (1.9 and 5 mol % SrCl 2 in NaCl, 0.8 and 5 mol % ZrF 4 in LiF) at up to 1100 °C. Near-edge (X-ray absorption near-edge structure, XANES) and extended X-ray absorption fine structure (EXAFS) spectra were measured. The EXAFS response was modeled using ab initio FEFF calculations. Strontium’s first shell is observed to be coordinated with chlorine (Sr 2+ –Cl – ) and zirconium’s first shell is coordinated by fluorine (Zr 4+ –F – ), both having coordination numbers that decrease with increasing temperature. Multiple zirconium complexes are believed to be present in the melt, which may interfere and distort the EXAFS spectra and result in an anomalously low zirconium first shell coordination number. Finally, the use of boron nitride (BN) powder as a salt diluent for XAFS measurements was found to not interfere with measurements and thus can be used for investigations of such systems.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Simultaneous three-dimensional elemental mapping of Hollandite and Pyrochlore material phases in ceramic waste form materials

In this study, differential X-ray absorption contrast tomography was performed on model ceramic composite systems to image the 3D spatial distributions of Ga and Nd containing phases. The model material systems were fabricated such that they contained two constituent phases. Ga–doped Ba hollandite (Ba 1.33 Ga 2.66 Ti 5.34 O 16 ), and pyrochlore (Nd 2 Ti 2 O 7 ) which are under consideration as nuclear waste immobilization matrices. Two complementary techniques have been used to characterize the 3D distribution of phases. The analysis suggests that the 3D spatial distributions of hollandite and pyrochlore can be readily identified through the distributions Ga and Nd, respectively. These results represent a critical development towards characterizing the complex microstructure inherent to practical materials such as multiphase ceramic composite waste forms. Furthermore, these methods can be applied to elucidate microstructural features that fundamentally determine the performance and properties of complex systems, which is central to the design of durable waste forms as well as many other real materials such fuel cells, batteries, ultra-high temperature ceramics.

36 MATERIALS SCIENCE↗

Multimodal hard x-ray imaging with resolution approaching 10 nm for studies in material science

We report multimodal scanning hard x-ray imaging with spatial resolution approaching 10 nm and its application to contemporary studies in the field of material science. The high spatial resolution is achieved by focusing hard x-rays with two crossed multilayer Laue lenses and raster-scanning a sample with respect to the nanofocusing optics. Various techniques are used to characterize and verify the achieved focus size and imaging resolution. Here, the multimodal imaging is realized by utilizing simultaneously absorption-, phase-, and fluorescence-contrast mechanisms. The combination of high spatial resolution and multimodal imaging enables a comprehensive study of a sample on a very fine length scale. In this work, the unique multimodal imaging capability was used to investigate a mixed ionic-electronic conducting ceramic-based membrane material employed in solid oxide fuel cells and membrane separations (compound of Ce 0.8 Gd 0.2 O 2–x and CoFe 2 O 4 ) which revealed the existence of an emergent material phase and quantified the chemical complexity at the nanoscale.

77 NANOSCIENCE AND NANOTECHNOLOGY↗

Three-dimensional mapping of crystalline ceramic waste form materials

Here, we demonstrate the use of synchrotron-based, transmission X-ray microscopy (TXM) and scanning electron microscopy to image the 3-D morphologies and spatial distributions of Ga-doped phases within model, single- and two-phase waste form material systems. Gallium doping levels consistent with those commonly used for nuclear waste immobilization (e.g., Ba 1.04 Cs 0.24 Ga 2.32 Ti 5.68 O 16 ) could be readily imaged. This analysis suggests that a minority phase with different stoichiometry/composition from the primary hollandite phase can be formed by the solid-state ceramic processing route with varying morphology (globular vs. cylindrical) as a function of Cs content. Our results represent a crucial step in developing the tools necessary to gain an improved understanding of the microstructural and chemical properties of waste form materials that influence their resistance to aqueous corrosion. This understanding will aid in the future design of higher durability waste form materials.

12 MANAGEMENT OF RADIOACTIVE AND NON-RADIOACTIVE W↗

Cold crucible induction melter test for crystalline ceramic waste form fabrication: A feasibility assessment

The first scaled proof-of-principle cold crucible induction melter (CCIM) test to process a multiphase ceramic waste form from a simulated combined (Cs/Sr, lanthanide and transition metal fission products) commercial used nuclear fuel waste stream was recently conducted in the United States. X-ray diffraction, 2-D X-ray absorption near edge structure (XANES), electron microscopy, inductively coupled plasma-atomic emission spectroscopy (and inductively coupled plasma-mass spectroscopy for Cs), and product consistency tests were used to characterize the fabricated CCIM material. Characterization analyses confirmed that a crystalline ceramic with a desirable phase assemblage was produced from a melt using a CCIM. We identified primary hollandite, pyrochlore/zirconolite, and perovskite phases in addition to minor phases rich in Fe, Al, or Cs. The material produced in the CCIM was chemically homogeneous and displayed a uniform phase assemblage with acceptable aqueous chemical durability.

12 MANAGEMENT OF RADIOACTIVE AND NON-RADIOACTIVE W↗

The effect of open-cell metal foams strut shape on convection heat transfer and pressure drop

Metal foams are promising materials for applications where enhancement of heat transfer is needed. Their performance depends on morphological parameters, such as the diameters of cells, pores, and struts, the porosity, the shape of struts. The effect of strut shape on convection heat transfer and pressure drop in open-cell metal foams has been investigated numerically in this paper by introducing the foam shape factor, a parameter that characterizes the shape of the strut. The analysis has been carried out both on real and ideal foams. The geometry of three 40 Pores Per Inch (PPI) real foams, with 0.87, 0.94 and 0.96 average measured porosities, was determined with X-ray Computed Microtomography (XCT) and a morphological analysis of the XCT data was carried out. The geometry of the ideal foams, based on the Lord Kelvin foam model, with the same PPI and porosities as those of the real foams, was generated with the free-to-use software Surface Evolver, building up foams with different strut shapes. Governing equations have been solved with a finite element scheme, assuming a uniform heat flux condition at the solid/fluid boundary of the foam. Results are presented in terms of convection heat transfer coefficients and pressure distributions as a function of strut shape parameters. Here, the comparison between predictions for ideal and real foams, for different strut shapes, confirms that, in all cases, the closer the form of the ideal strut to that of the real strut the better the agreement among predictions. It is also pointed out that the convection heat transfer coefficient is maximized when, at equal porosity, the ligament shape is convex, while a concave strut shape maximizes the pressure drop.

42 ENGINEERING↗

In Situ Heater Design for Nanoscale Synchrotron-Based Full-Field Transmission X-Ray Microscopy

Abstract The oxidation of nickel powder under a controlled gas and temperature environment was studied using synchrotron-based full-field transmission X-ray microscopy. The use of this technique allowed for the reaction to be imaged in situ at 55 nm resolution. The setup was designed to fit in the limited working distance of the microscope and to provide the gas and temperature environments analogous to solid oxide fuel cell operating conditions. Chemical conversion from nickel to nickel oxide was confirmed using X-ray absorption near-edge structure. Using an unreacted core model, the reaction rate as a function of temperature and activation energy were calculated. This method can be applied to study many other chemical reactions requiring similar environmental conditions.

in situ↗

Extension of anisotropic effective medium theory to account for an arbitrary number of inclusion types

The purpose of this paper is to extend, to multi-components, a previously reported theory for calculating the effective conductivity of a two component mixture. The previously reported theory involved preferentially oriented spheroidal inclusions contained in a continuous matrix, with inclusions oriented relative to a principle axis. This approach was based on Bruggeman's unsymmetrical theory, and is extended to account for an arbitrary number of different inclusion types. The development begins from two well-known starting points; the Maxwell approach and the Maxwell-Garnett approach for dilute mixtures. It is shown that despite these two different starting points, the final Bruggeman type equation is the same. As a means of validating the developed expression, comparisons are made to several existing effective medium theories. It is shown that these existing theories coincide with the developed equations for the appropriate parameter set. Finally, a few example mixtures are considered to demonstrate the effect of multiple inclusions on the calculated effective property. Inclusion types of different conductivities, shapes, and orientations are considered and each of the aforementioned properties is shown to have a potentially significant impact on the calculated mixture property.

36 MATERIALS SCIENCE↗