Engineering topics

Choi, Hoon (ORCID:0000000227913788)

Publications and source records attributed to Choi, Hoon (ORCID:0000000227913788).

4 records

DOE OSTI2025

A Novel Zwitterionic Chromatography Approach to Separate Lithium from Unconventional Resources

Lithium (Li) is a key element for clean energy technologies, and, accordingly, the global lithium demand has been increasing rapidly. Therefore, to meet the Li demand and maintain supply chain stability, it is critical to develop efficient lithium extraction technologies that allow exploitation of unconventional lithium resources, such as geothermal brines and inland brine streams. However, the recovery of Li from these resources is challenging due to low Li concentration, low ratios of Li/Na, Li/Mg, or Li/Ca, and complex feed compositions. To address this, we introduced a new Direct Lithium Extraction (DLE) process using Zwitterionic Chromatography (ZIC) to separate Li from other salts. Since salts are partitioned on ZIC under water elution, no reagent chemicals are needed, and the Li separation is not limited by the adsorption capacity. We prepared 13 different zwitterionic (ZI) resins to investigate the salt retention on various ZI groups and then screened out promising sorbents for efficient Li separation. It was found that salt retention was synergistically affected by the pore size and ZI configurations. Using carboxybetaine (QAC3CA) sorbents, multicomponent separations showed that Li can be partitioned from divalent salts or Na with selectivities of 1.8 or 1.9, respectively. Although the selectivity is relatively low, in real brine tests, Li was separated from Ca and Mg with 79.2 % yield, showing the potential for a continuous process to achieve high productivity and high yield. Simulation studies suggest the salt elution mechanism is related to the hydration reaction energy and the effective hydrated radius of cations.

critical minerals↗

DOE OSTI2023

Advanced Mineral Separations with Novel Simulated Moving Beds

Lithium is a critical mineral that is widely used in batteries and energy storage applications, making it increasingly important in the next few decades. To meet the growing demand for lithium and secure domestic supply chains, there is a need to exploit unconventional lithium resources. However, utilizing current lithium extraction processes is challenging due to the high salinity in those resources. Thus, it is essential to develop energy-efficient, and less chemical-intensive separation processes that can exploit high-salinity lithium resources. Accordingly, this project aims to design a novel zwitterionic stationary phase and use it to develop a continuous chromatography process to recover LiCl minerals from traditionally unexploited domestic saline resources. The developed zwitterionic stationary phase allows fractionating minerals based on their different sorbent affinities under water elution. A systematically designed continuous process can separate lithium from other minerals, reducing the risk of material fouling and the overall chemical consumption to produce battery-grade lithium. This approach is expected to significantly enhance the efficiency and sustainability of the lithium extraction process while also reducing the environmental impact associated with traditional processes. At the end of the project, the technology will be demonstrated in continuous mode using a simulated moving bed (SMB) to recover >100 g of LiCl from real resource waters. The U.S.-based resources that this project targets for LiCl recovery are formation water, oil-produced water, and geothermal brines, supplied by Standard Lithium Ltd. and Shell Inc, respectively.

critical minerals↗

DOE OSTI2023

Task 2.1: Adsorption-Based ISPR for BETO-Relevant Bioproducts

This task focuses on the development of adsorption-based in situ product recovery (ISPR) integrated with simulated moving bed chromatography for the recovery and purification of carboxylate products that are relevant to BETO. ISPR has been pursued previously in the Separations Consortium to recover carboxylic acids near or below their pKa values with liquid-liquid extraction coupled to downstream distillation. However, there are many acid products in the BETO portfolio that require neutralization well above their pKa values wherein ISPR could still be a major benefit to the bioprocess performance, including muconic acid, beta-ketoadipic acid, 3-hydroxypropionic acid, itaconic acid, butyric acid, and others. In this task, we are combining dynamic filtration with a rotating ceramic disk, resin capacity measurements, tailored resin synthesis, and simulated moving bed chromatography into an ISPR system that can be used to recover BETO-relevant carboxylates from bioreactor cultivations. We are working across process scales and using computational modeling where applicable alongside techno-economic analysis and life cycle assessment to understand major cost, energy, and GHG emissions drivers. The impact of this project will be a bench-scale integrated approach to recover carboxylate products in situ, which will reduce the waste generation from biological carboxylate production processes and improve the productivities of biological systems.

bio-based acid↗

DOE OSTI2023

Task 2.3: Continuous Counter-Current Chromatography

This task in the Separations Consortium focuses on the development of counter-current chromatography (CCC), which is an advanced liquid-liquid chromatography method. Today, CCC is primarily practiced in batch mode operation, but continuous operation will be required for at-scale deployment in a biorefinery setting. In this task, we are developing a continuous CCC process in collaboration with a company that builds CCC units. This work will be demonstrated on the biorefining challenge of lignin valorization. Specifically, we demonstrate use of continuous CCC for both monomer-monomer and monomer-oligomer separations in multiple lignin streams of relevance to the biorefining industry. Breakthroughs in this area would be useful for BETO goals in both sustainable aviation fuel and biochemicals production, including directly contributing to BETO's 2030 lignin valorization goal. Our approach includes developing new computational modeling approaches to optimize both batch and continuous CCC processes, experimental work to determine optimal solvent systems for multiple lignin streams sourced from BETO-funded projects and industrial collaborators, and techno-economic analysis and life cycle assessment to identify the most impactful areas to ultimately enable this approach in the biorefinery. This task overall will enable high-resolution, multi-component, continuous separations at scale, demonstrated on a grand challenge biorefining problem.

BIOMASS FUELS↗