Search NASA⌕ Search

Engineering topics

Chowdhary, Kenny

Publications and source records attributed to Chowdhary, Kenny.

9 records
All sourcesNASA NTRSDOE OSTI
DOE OSTI2024

CLimate Impact: Determining Etiology thRough pAthways (CLDERA)

Climate impacts have broad economic, health, political, and national security ramifications. Societally relevant impacts are typically farther downstream, are the product of multiple interacting processes, and can arise over small regions and timeframes because their sources are short-term and localized. Short-term forcings (as can be seen in volcanic eruptions, climatic tipping points (e.g., the collapse of rainforests or the disappearance of sea ice), or in increasingly plausible climate interventions) fundamentally possess low signal-to-noise and could benefit from accounting for the multiple conditional processes through which a downstream impact arises. Under the Grand Challenge LDRD CLDERA (CLimate impacts: Discovering Etiology thRough pAthways), we have developed tools to enable downstream impact attribution from geographically and temporally localized source forcings in the climate. CLDERA developed methods that can distinguish how a localized source drives the climate system to respond with particular impacts. The how is embodied in pathways – the spatio-temporally evolving chain of physical processes that connects a source to a series of increasingly distant impacts. Novel analytic methods in pursuit of downstream impact attribution were developed and demonstrated on simulations and observations of the 1991 eruption of Mt. Pinatubo in the Philippines. As described within this report we have • developed stratospheric expertise and aerosol modeling capabilities in E3SM, • created original methods to detect and model pathways from source-to-impact, and • advanced climate attribution through novel methods, cases, and approaches. Further, CLDERA developed a tiered verification process consisting of controlled datasets to prototype, verify, and refine the original method development. CLDERA increased Sandia’s footprint in the climate analytics community and developed new climate collaborations whilst also creating a cadre of climate analysts at Sandia. The products from CLDERA have been extensive with a total of 9 journal articles published, 12 articles submitted and under review, and an additional 8 articles in preparation. We have produced 1750 simulated years and developed 9 code-bases. This report details these accomplishments and serves as a summary of the work completed during the CLDERA Grand Challenge.

54 ENVIRONMENTAL SCIENCES↗
DOE OSTI2024

Autocalibration of the E3SM Version 2 Atmosphere Model Using a PCA-Based Surrogate for Spatial Fields

Global Climate Model tuning (calibration) is a tedious and time-consuming process, with high-dimensional input and output fields. Experts typically tune by iteratively running climate simulations with hand-picked values of tuning parameters. Many, in both the statistical and climate literature, have proposed alternative calibration methods, but most are impractical or difficult to implement. We present a practical, robust, and rigorous calibration approach on the atmosphere-only model of the Department of Energy's Energy Exascale Earth System Model (E3SM) version 2. Our approach can be summarized into two main parts: (a) the training of a surrogate that predicts E3SM output in a fraction of the time compared to running E3SM, and (b) gradient-based parameter optimization. To train the surrogate, we generate a set of designed ensemble runs that span our input parameter space and use polynomial chaos expansions on a reduced output space to fit the E3SM output. We use this surrogate in an optimization scheme to identify values of the input parameters for which our model best matches gridded spatial fields of climate observations. To validate our choice of parameters, we run E3SMv2 with the optimal parameter values and compare prediction results to expertly-tuned simulations across 45 different output fields. This flexible, robust, and automated approach is straightforward to implement, and we demonstrate that the resulting model output matches present day climate observations as well or better than the corresponding output from expert tuned parameter values, while considering high-dimensional output and operating in a fraction of the time.

54 ENVIRONMENTAL SCIENCES↗
DOE OSTI2022

Calibrating hypersonic turbulence flow models with the HIFiRE-1 experiment using data-driven machine-learned models.

In this paper we study the efficacy of combining machine-learning methods with projection-based model reduction techniques for creating data-driven surrogate models of computationally expensive, high-fidelity physics models. Such surrogate models are essential for many-query applications e.g., engineering design optimization and parameter estimation, where it is necessary to invoke the high-fidelity model sequentially, many times. Surrogate models are usually constructed for individual scalar quantities. However there are scenarios where a spatially varying field needs to be modeled as a function of the model’s input parameters. Here we develop a method to do so, using projections to represent spatial variability while a machine-learned model captures the dependence of the model’s response on the inputs. The method is demonstrated on modeling the heat flux and pressure on the surface of the HIFiRE-1 geometry in a Mach 7.16 turbulent flow. The surrogate model is then used to perform Bayesian estimation of freestream conditions and parameters of the SST (Shear Stress Transport) turbulence model embedded in the high-fidelity (Reynolds-Averaged Navier–Stokes) flow simulator, using shock-tunnel data. The paper provides the first-ever Bayesian calibration of a turbulence model for complex hypersonic turbulent flows. We find that the primary issues in estimating the SST model parameters are the limited information content of the heat flux and pressure measurements and the large model-form error encountered in a certain part of the flow.

42 ENGINEERING↗
DOE OSTI2021

Advancing Sea Ice Predictability in E3SM with Machine Learning

Focal area(s): To improve predictions of sea ice in E3SM we propose to develop a hierarchy of data-driven models using observational and simulation data to investigate the most important Earth system drivers of sea ice variability and loss, develop surrogates that build on the reduced parameter space of important drivers, and, where appropriate, couple machine learning models with standard PDE models to capture important physical behavior at different scales. This work falls under Focal Area 2. Predictive modeling through the use of AI techniques.

54 ENVIRONMENTAL SCIENCES↗
DOE OSTI2021

Automated Custom Calibration for E3SM

Focal Area(s): Automated custom calibration for the Energy Exascale Earth System Model (E3SM) applies primarily to focal area 2: Predictive modeling through the use of AI techniques, and includes elements of focal area 3: Insight gleaned from complex data (both observed and simulated).

54 ENVIRONMENTAL SCIENCES↗
DOE OSTI2021

PRIME

SAND2021-0565 O PRIME is a modeling framework designed for the real-time characterization and forecasting of partially observed epidemics. The method is designed to help guide medical resource allocation in the early epoch of the outbreak. Characterization is the estimation of infection spread parameters using daily counts of symptomatic patients. The estimation problem is posed as one of Bayesian inference and solved using a Markov Chain Monte Carlo technique. The framework can accommodate multiple epidemic waves and can help identify different disease dynamics at the regional, state, and country levels. Examples are provided using publicly available COVID-19 data. Sandia National Laboratories is a multimission laboratory managed and operated by National Technology & Engineering Solutions of Sandia, LLC, a wholly owned subsidiary of Honeywell International Inc., for the U.S. Department of Energy’s National Nuclear Security Administration under contract DE-NA0003525.

Safta, Cosmin↗
DOE OSTI2018

Enhancing statistical moment calculations for stochastic Galerkin solutions with Monte Carlo techniques

Here, we provide a method for enhancing stochastic Galerkin moment calculations to the linear elliptic equation with random diffusivity using an ensemble of Monte Carlo solutions. This hybrid approach combines the accuracy of low-order stochastic Galerkin and the computational efficiency of Monte Carlo methods to provide statistical moment estimates which are significantly more accurate than performing each method individually. The hybrid approach involves computing a low-order stochastic Galerkin solution, after which Monte Carlo techniques are used to estimate the residual. We show that the combined stochastic Galerkin solution and residual is superior in both time and accuracy for a one-dimensional test problem and a more computational intensive two-dimensional linear elliptic problem for both the mean and variance quantities.

97 MATHEMATICS AND COMPUTING↗
DOE OSTI2017

An improved hyperbolic embedding algorithm

Because hyperbolic space has properties that make it amenable to graph representations, there is significant interest in scalable hyperbolic-space embedding methods. These embeddings enable constant-time approximation of shortest-path distances, and so are significantly more efficient than full shortest-path computations. In this article, we improve on existing landmark-based hyperbolic embedding algorithms for large-scale graphs. Whereas previous methods compute the embedding by using the derivative-free Nelder–Mead simplex optimization method, our approach uses the limited-memory BFGS (LBFGS) method, which is quasi-Newton optimization, with analytic gradients. Our method is not only significantly faster but also produces higher-quality embeddings. Moreover, we are able to include the hyperbolic curvature as a variable in the optimization. We compare our hyperbolic embedding method implementation in Python (called Hypy) against the best publicly available software, Rigel. Our method is an order of magnitude faster and shows significant improvements in the accuracy of the shortest-path distance calculations. Furthermore, tests are performed on a variety of real-world networks, and we show the scalability of our method by embedding a graph with 1.8 billion edges and 65 million nodes.

97 MATHEMATICS AND COMPUTING↗