ational synthesis and electrochemical performance of LiVOPO4 polymorphs
Explore the source record for details and available documents.
Engineering topics
Publications and source records attributed to Chu, Iek-Heng.
Explore the source record for details and available documents.
All-solid-state rechargeable sodium (Na)-ion batteries are promising for inexpensive and high-energy-density large-scale energy storage. In this contribution, new Na solid electrolytes, Na 3- y PS 4- x Cl x , are synthesized with a strategic approach, which allows maximum substitution of Cl for S ( x = 0.2) without significant compromise of structural integrity or Na deficiency. A maximum conductivity of 1.96 mS cm -1 at 25 °C is achieved for Na 3.0 PS 3.8 Cl 0.2 , which is two orders of magnitude higher compared with that of tetragonal Na 3 PS 4 (t-Na 3 PS 4 ). The activation energy ( E a ) is determined to be 0.19 eV. Ab initio molecular dynamics simulations shed light on the merit of maximizing Cl-doping while maintaining low Na deficiency in enhanced Na-ion conduction. Solid-state nuclear magnetic resonance (NMR) characterizations confirm the successful substitution of Cl for S and the resulting change of P oxidation state from 5+ to 4+, which is also verified by spin moment analysis. Ion transport pathways are determined with a tracer-exchange NMR method. The functional detects that promote Na -ion transport are maximized for further improvement in ionic conductivity. Full-cell performance is demonstrated using Na/Na 3.0 PS 3.8 Cl 0.2 /Na 3 V 2 (PO 4 ) 3 with a reversible capacity of ≈100 mAh g -1 at room temperature.
Not Available
Structural changes in VO 2 F, which allow two-electron transfer during electrochemical Li cycling, were investigated in this work. This compound adopts a rhombohedral structure, space group $R\overline{3}c$, with O and F sharing one site, and was synthesized by high-energy ball-milling. The thermal stability of VO 2 F, which is related to the battery safety, is studied by in situ XRD upon heating and by thermal gravimetric analysis. VO 2 F is found to be stable up to 160 °C under inert atmosphere; above this temperature, it converts into vanadium oxide with fluorine loss. The structure evolution upon lithium cycling was studied by ex situ X-ray diffraction and absorption techniques. The results show that lithiation of VO 2 F goes through a solid-solution reaction, and the rhombohedral structure is preserved if no more than one lithium ion is intercalated. Upon a second Li insertion, an irreversible transition to a rock-salt structure occurs. We show using first-principles calculations that this irreversible transformation can be explained by an asymmetric energetic preference between the rhombohedral and rock-salt forms of Li x VO 2 F, which result in large thermodynamic driving forces to convert to the rock-salt structure at x > 1 and relatively small thermodynamic driving forces to convert back to the rhombohedral structure when delithiating to x < 1.
Sodium ion batteries have attracted much attention in recent years, due to the higher abundance and lower cost of sodium, as an alternative to lithium ion batteries. However, a major challenge is their lower energy density. In this work, we report a novel multi–electron cathode material, KVOPO4, for sodium ion batteries. Due to the unique polyhedral framework, the V 3+ ↔ V 4+ ↔ V 5+ redox couple was for the first time fully activated by sodium ions in a vanadyl phosphate phase. The KVOPO 4 based cathode delivered reversible multiple sodium (i.e. maximum 1.66 Na + per formula unit) storage capability, which leads to a high specific capacity of 235 Ah kg –1 . Combining an average voltage of 2.56 V vs. Na/Na+, a high practical energy density of over 600 Wh kg –1 was achieved, the highest yet reported for any sodium cathode material. The cathode exhibits a very small volume change upon cycling (1.4% for 0.64 sodium and 8.0% for 1.66 sodium ions). In conclusion, density functional theory (DFT) calculations indicate that the KVOPO4 framework is a 3D ionic conductor with a reasonably, low Na + migration energy barrier of ≈450 meV, in line with the good rate capability obtained.
Page 7847. The authors express regret that one mistake was made in their paper. In Figure 4b, the “Endo-Exo” direction was supposed to be reversed. When the orientation is corrected, T g is assigned an endothermic process and T c is assigned an exothermic process. A corrected Figure 4b (along with its original caption) is provided. Although the error was present, it does not affect the interpretation and conclusions of the manuscript as a whole. The authors apologize for any inconvenience this may have caused the readers.
New crystal structures are frequently derived by performing ionic substitutions on known crystal structures. These derived structures are then used in further experimental analysis, or as the initial guess for structural optimization in electronic structure calculations, both of which usually require a reasonable guess of the lattice parameters. In this work, we propose two lattice prediction schemes to improve the initial guess of a candidate crystal structure. The first scheme relies on a one-to-one mapping of species in the candidate crystal structure to a known crystal structure, while the second scheme relies on data-mined minimum atom pair distances to predict the crystal volume of the candidate crystal structure and does not require a reference structure. We demonstrate that the two schemes can effectively predict the volumes within mean absolute errors (MAE) as low as 3.8% and 8.2%. Here we also discuss the various factors that may impact the performance of the schemes. Implementations for both schemes are available in the open-source pymatgen software.
We present an exposition of first-principles approaches to elucidating interfacial reactions in all-solid-state sodium-ion batteries. We will demonstrate how thermodynamic approximations based on assumptions of fast alkali diffusion and multispecies equilibrium can be used to effectively screen combinations of Na-ion electrodes, solid electrolytes, and buffer oxides for electrochemical and chemical compatibility. We find that exchange reactions, especially between simple oxides and thiophosphate groups to form PO 4 3– , are the main cause of large driving forces for cathode/solid electrolyte interfacial reactions. A high reactivity with large volume changes is also predicted at the Na anode/solid electrolyte interface, while the Na 2 Ti 3 O 7 anode is predicted to be much more stable against a broad range of solid electrolytes. We identify several promising binary oxides, Sc 2 O 3 , SiO 2 , TiO 2 , ZrO 2 , and HfO 2 , that are similarly or more chemically compatible with most electrodes and solid electrolytes than the commonly used Al 2 O 3 is. Finally, we show that ab initio molecular dynamics simulations of the NaCoO 2 /Na 3 PS 4 interface model predict that the formation of SO 4 2– -containing compounds and Na 3 P is kinetically favored over the formation of PO 4 3– -containing compounds, in contrast to the predictions of the thermodynamic models. As a result, this work provides useful insights into materials selection strategies for enabling stable electrode/solid electrolyte interfaces, a critical bottleneck in designing all-solid-state sodium-ion batteries, and outlines several testable predictions for future experimental validation.
In this work, we present a highly accurate spectral neighbor analysis potential (SNAP) model for molybdenum (Mo) developed through the rigorous application of machine learning techniques on large materials data sets. Despite Mo's importance as a structural metal, existing force fields for Mo based on the embedded atom and modified embedded atom methods still do not provide satisfactory accuracy on many properties. We will show that by fitting to the energies, forces and stress tensors of a large density functional theory (DFT)-computed dataset on a diverse set of Mo structures, a Mo SNAP model can be developed that achieves close to DFT accuracy in the prediction of a broad range of properties, including energies, forces, stresses, elastic constants, melting point, phonon spectra, surface energies, grain boundary energies, etc. We will outline a systematic model development process, which includes a rigorous approach to structural selection based on principal component analysis, as well as a differential evolution algorithm for optimizing the hyperparameters in the model fitting so that both the model error and the property prediction error can be simultaneously lowered. We expect that this newly developed Mo SNAP model will find broad applications in large-scale, long-time scale simulations.
Layered P2 oxides are promising cathode materials for rechargeable sodium-ion batteries. In this work, we systematically investigate the effects of transition-metal (TM) mixing on Na ordering and kinetics in the Na x Co 1-y Mn y O 2 model system using density-functional-theory (DFT) calculations. The DFT-predicted 0-K stability diagrams indicate that Co-Mn mixing reduces the energetic differences between Na orderings, which may account for the reduction of the number of phase transformations observed during the cycling of mixed-TM P2 layered oxides compared to a single TM. Using ab initio molecular-dynamics simulations and nudged elastic-band calculations, we show that the TM composition at the Na(1) (face-sharing) site has a strong influence on the Na site energies, which in turn impacts the kinetics of Na diffusion towards the end of the charge. Furthermore, by employing a site-percolation model, we establish theoretical upper and lower bounds for TM concentrations based on their effect on Na(1) site energies, providing a framework to rationally tune mixed-TM compositions for optimal Na diffusion.
Multi-electron polyanion cathodes offer the potential for achieving both high voltage and high capacity in rechargeable alkali-ion batteries. Among the few materials known to exhibit multi-electron cycling, the polymorphs of VOPO 4 , which operate on the V 3+ –V 4+ –V 5+ redox couples, are particularly promising due to the high gravimetric capacities that have been achieved and the high voltage of the V 4+/5+ couple. In this work, we performed a systematic first principles investigation, supported by careful electrochemical characterization and published experimental data, of the relative thermodynamic stability, voltage, band gap, and diffusion kinetics for alkali intercalation into the β, ε and αI polymorphs of VOPO 4 . We find that all VOPO4 polymorphs remain reasonably stable with the insertion of one alkali ion per V, but are significantly destabilized with the insertion of two alkali ions per V. The voltages for Na insertion are ~0.33–0.69 V lower than those for Li insertion. We find that the αI polymorph is predicted to have higher Li + migration barriers and larger band gaps than the β and ε polymorphs, which account for the relatively worse electrochemical cycling performance observed. On the other hand, only the αI polymorph exhibits reasonably low barriers for Na + migration compared to the β and ε polymorphs, which are consistent with observed electrochemical performances reported thus far in the literature. We also show that differences in the voltage, kinetics and rate capability of these different polymorphs for Li and Na insertion can be traced back to their fundamentally different VO 6 /VO 5 -PO 4 frameworks.
We report two novel, earth-abundant lithium superionic conductors, Li3Y(PS4)2 and Li5PS4Cl2, that are predicted to satisfy the necessary combination of good phase stability, high Li+ conductivity, wide band gap and good electrochemical stability for solid electrolyte applications in all-solid-state rechargeable lithium-ion batteries. These candidates were identified from a high-throughput first-principles screening of the Li–P–S ternary and Li–M–P–S (where M is a non-redox-active element) quaternary chemical spaces, including candidates obtained by replacing Ag with Li in the Ag–P–S and Ag–M–P–S chemical spaces. An efficient tiered screening strategy was developed that combines topological analysis with ab initio molecular dynamics simulations to exclude rapidly candidates unlikely to satisfy the stringent conductivity requirements of lithium superionic conductors. In particular, we find Li3Y(PS4)2 to be an extremely promising candidate exhibiting a room-temperature Li+ conductivity of 2.16 mS/cm, which can be increased multifold to 7.14 and 5.25 mS/cm via aliovalent doping with Ca2+ and Zr4+, respectively. More critically, we show that the phase and electrochemical stability of Li3Y(PS4)2 is expected to be better than current state-of-the-art lithium superionic conductors.
All-solid-state sodium-ion batteries are promising candidates for large-scale energy storage applications. The key enabler for an all-solid-state architecture is a sodium solid electrolyte that exhibits high Na + conductivity at ambient temperatures, as well as excellent phase and electrochemical stability. In this work, we present a first-principles-guided discovery and synthesis of a novel Cl-doped tetragonal Na 3 PS 4 (t-Na 3-x PS 4-x Cl x ) solid electrolyte with a room-temperature Na(+) conductivity exceeding 1 mS cm(-1). We demonstrate that an all-solid-state TiS 2 /t-Na 3-x PS 4-x Cl x /Na cell utilizing this solid electrolyte can be cycled at room-temperature at a rate of C/10 with a capacity of about 80 mAh g -1 over 10 cycles. We provide evidence from density functional theory calculations that this excellent electrochemical performance is not only due to the high Na(+) conductivity of the solid electrolyte, but also due to the effect that "salting" Na 3 PS 4 has on the formation of an electronically insulating, ionically conducting solid electrolyte interphase.
We present a detailed exposition of how first-principles methods can be used to guide alkali superionic conductor (ASIC) study and design. Using the argyrodite Li 6 PS 5 Cl as a case study, we demonstrate how modern information technology (IT) infrastructure and software tools can facilitate the assessment of alkali superionic conductors in terms of various critical properties of interest such as phase and electrochemical stability and ionic conductivity. The emphasis is on well-documented, reproducible analysis code that can be readily generalized to other material systems and design problems. For our chosen Li 6 PS 5 Cl case study material, we show that Li excess is crucial to enhancing its conductivity by increasing the occupancy of interstitial sites that promote long-range Li + diffusion between cage-like frameworks. The predicted room-temperature conductivities and activation barriers are in reasonably good agreement with experimental values.
Electron transport in graphene is along the sheet but junction devices are often made by stacking different sheets together in a “side-contact” geometry which causes the current to flow perpendicular to the sheets within the device. Such geometry presents a challenge to first-principles transport methods. We solve this problem by implementing a plane-wave-based multiple-scattering theory for electron transport. In this study, this implementation improves the computational efficiency over the existing plane-wave transport code, scales better for parallelization over large number of nodes, and does not require the current direction to be along a lattice axis. As a first application, we calculate the tunneling current through a side-contact graphene junction formed by two separate graphene sheets with the edges overlapping each other. We find that transport properties of this junction depend strongly on the AA or AB stacking within the overlapping region as well as the vacuum gap between two graphene sheets. Finally, such transport behaviors are explained in terms of carbon orbital orientation, hybridization, and delocalization as the geometry is varied.
We have investigated the group 14 nitrides (M{sub 3}N{sub 4}) in the spinel phase (γ-M{sub 3}N{sub 4} with M = C, Si, Ge, and Sn) and β phase (β-M{sub 3}N{sub 4} with M = Si, Ge, and Sn) using density functional theory with the local density approximation and the GW approximation. The Kohn-Sham energies of these systems have been first calculated within the framework of full-potential linearized augmented plane waves (LAPW) and then corrected using single-shot G{sub 0}W{sub 0} calculations, which we have implemented in the modified version of the Elk full-potential LAPW code. Direct band gaps at the Γ point have been found for spinel-type nitrides γ-M{sub 3}N{sub 4} with M = Si, Ge, and Sn. The corresponding GW-corrected band gaps agree with experiment. We have also found that the GW calculations with and without the plasmon-pole approximation give very similar results, even when the system contains semi-core d electrons. These spinel-type nitrides are novel materials for potential optoelectronic applications because of their direct and tunable band gaps.