Engineering topics

Chu, M. G.

Publications and source records attributed to Chu, M. G..

3 records

NASA NTRS1984

Solidification of highly undercooled Sn-Pb alloy droplets

Experimental work on undercooling and structure of tin-lead droplets emulsified in oil is described. The droplets, predominantly in the size range of 10 to 20 microns, were cooled at rates (just before nucleation) ranging from about 0.1 to 1 million K/s. The higher cooling rates were obtained by a newly developed technique of quenching the emulsified droplets in a cold liquid. Measured undercoolings (at the lower cooling rates) ranged up to about 100 K. Structures obtained depend strongly on undercooling, cooling rate before and after nucleation, and alloy composition. Droplets containing up to 5 wt pct Pb were apparently single phase when undercooled and rapidly quenched. Droplets in the composition range of about 25-90 wt pct Pb solidified dendritically, even at the most rapid quench rates employed, apparently because these alloys undercooled only slightly before nucleation of the primary phase.

Chu, M. G.↗

NASA NTRS1983

Rapid solidification of highly undercooled alloy droplets

Experimental work is described on undercooling and structure of tin-lead droplets emulsified in oil. The droplets, predominantly in the size range of 10-20 microns, were cooled at rates ranging from about 0.04 K/sec to 1,000,000 K/sec. The higher cooling rates were obtained by a newly developed technique of quenching the emulsified droplets in a cold liquid. Measured undercoolings (at the lower cooling rates) ranged up to about 100 C. Structures obtained depended strongly on undercooling, cooling rate before nucleation, droplet size, alloy composition and the rate of heat extraction after nucleation.

Chu, M. G.↗

NASA NTRS1982

Solidification mechanism of highly undercooled metal alloys

Experiments were conducted on metal droplet undercooling, using Sn-25wt%Pb and Ni-34wt%Sn alloys. To achieve the high degree of undercooling, emulsification treatments were employed. Results show the fraction of supersaturated primary phase is a function of the amount of undercooling, as is the fineness of the structures. The solidification behavior of the tin-lead droplets during recalescence was analyzed using three different hypotheses; (1) solid forming throughout recalescence is of the maximum thermodynamically stable composition; (2) partitionless solidification below the T sub o temperature, and solid forming thereafter is of the maximum thermodynamically stable composition; and (3) partitionless solidification below the T sub o temperature with solid forming thereafter that is of the maximum thermodynamically metastable composition that is possible. The T sub o temperature is calculated from the equal molar free energies of the liquid solid using the regular solution approximation.

Shiohara, Y.↗