Search NASA⌕ Search

Engineering topics

Chudnovskii, V. M.

Publications and source records attributed to Chudnovskii, V. M..

Laser-Induced Superintensive Bubble Boiling

Superintensive bubble boiling (SBB) is implemented in water in the absence of degassing at the end surface of a laser fiber using 100-ns laser pulses. A thulium fiber laser with a radiation wavelength of 1.94 μm and moderate power is used as a radiation source. The generation of bubble microjets in the vicinity of the end surface of the laser fiber is studied with the aid of high-speed photography and acoustic methods. After a threshold transition to the SBB regime, the energy of acoustic emission is predominantly concentrated in an acoustic interval of 10–30 kHz. The acoustic signal is generated due to thermal cavitation. Record-high thermal fluxes of up to 0.16 MW/cm{sup 2} are reached in the SBB regime. Parameters of the resulting convective fluxes, microbubbles, and broadband acoustic oscillations are determined.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗

Laser-induced boiling of biological liquids in medical technologies

Using optical and acoustic methods we study thermal and transport processes related to the boiling of biological liquids under the action of continuous-wave laser radiation having moderate power (1 – 10 W) in the near-IR range (0.97 – 1.94 μm). These processes are investigated in the course of a few particular clinical procedures aimed at the modification and removal of pathological tissues (veins, mammary gland cyst, Baker’s cyst) and tissue regeneration (intervertebral discs). In the proposed approach, the modification and destruction of biotissues are due to the fast delivery of heat by two-phase jet flows, formed in the course of liquid boiling, rather than the direct laser heating. This provides the high rate of heat delivery to the pathological biotissue, avoiding its overheating (the temperature higher than 100 °C) and undesired heating of adjacent tissues. Two main regimes of laser-induced boiling near the optical fibre tip were revealed, namely, the heterogeneous jet boiling (arising when the fibre with a blackened tip is used) and the homogeneous boiling (with the radiation absorbed in the liquid volume). Both studied regimes allow one to obtain high specific heat flows, and the domination of one of the boiling regimes is determined by the presence of absorbing coating on the fibre tip, the tissue type, as well as by its shape (e.g., the presence of channels or cavities in the tissue). It is established that the heterogeneous jet boiling at the fibre tip corresponds to the regime of superintensive bubble boiling. (paper)

42 ENGINEERING↗