Engineering topics

Chung, Duck Young

Publications and source records attributed to Chung, Duck Young.

43 records · Page 3

DOE OSTI2021

Inorganic Halide Perovskitoid TlPbI 3 for Ionizing Radiation Detection

Room temperature semiconductor detector (RTSD) materials for γ-ray and X-ray radiation are in great demand for the nonproliferation of nuclear materials as well as for biomedical imaging applications. Halide perovskites have attracted great attention as emerging and promising RTSD materials. In this contribution, the material synthesis, purification, crystal growth, crystal structure, photoluminescence properties, ionizing radiation detection performance, and electronic structure of the inorganic halide perovskitoid compound TlPbI 3 are reported on. This compound crystallizes in the ABX 3 non-perovskite crystal structure with a high density of d = 6.488 g·cm –3 , has a wide bandgap of 2.25 eV, and melts congruently at a low temperature of 360 °C without phase transitions, which allows for facile growth of high quality crystals with few thermally-activated defects. High-quality TlPbI 3 single crystals of centimeter-size are grown using the vertical Bridgman method using purified raw materials. A high electrical resistivity of ≈10 12 Ω·cm is readily obtainable, and detectors made of TlPbI 3 single crystals are highly photoresponsive to Ag K α X-rays (22.4 keV), and detects 122 keV γ-rays from 57 Co radiation source. The electron mobility-lifetime product µ e τ e was estimated at 1.8 × 10 –5 cm 2 ·V –1 . A high relative static dielectric constant of 35.0 indicates strong capability in screening carrier scattering and charged defects in TlPbI 3 .

36 MATERIALS SCIENCE↗

DOE OSTI2020

CsPbBr3 perovskite detectors with 1.4% energy resolution for high-energy γ-rays

Halide perovskite semiconductors are poised to revitalize the field of ionizing radiation detection as they have done to solar photovoltaics. We show that all-inorganic perovskite CsPbBr 3 devices resolve 137 Cs 662-keV γ-rays with 1.4% energy resolution, as well as other X- and γ-rays with energies ranging from tens of keV to over 1 MeV in ambipolar sensing and unipolar hole-only sensing modes with crystal volumes of 6.65 mm 3 and 297 mm 3 , respectively. Furthermore, we report the scale-up of CsPbBr 3 ingots to up to 1.5 inches in diameter with an excellent hole mobility–lifetime product of 8 × 10 -3 cm 2 V -1 and a long hole lifetime of up to 296 μs. CsPbBr 3 detectors demonstrate a wide temperature region from ~2 °C to ~70 °C for stable operation. Detectors protected with suitable encapsulants show a uniform response for over 18 months. Consequently, we identify perovskite CsPbBr 3 semiconductor as an exceptional candidate for new-generation high-energy γ-ray detection.

47 OTHER INSTRUMENTATION↗

DOE OSTI2020

Magnetizing lead-free halide double perovskites

Spintronics holds great potential for next-generation high-speed and low–power consumption information technology. Recently, lead halide perovskites (LHPs), which have gained great success in optoelectronics, also show interesting magnetic properties. However, the spin-related properties in LHPs originate from the spin-orbit coupling of Pb, limiting further development of these materials in spintronics. Here, we demonstrate a new generation of halide perovskites, by alloying magnetic elements into optoelectronic double perovskites, which provide rich chemical and structural diversities to host different magnetic elements. In our iron-alloyed double perovskite, Cs 2 Ag(Bi:Fe)Br 6 , Fe 3+ replaces Bi 3+ and forms FeBr 6 clusters that homogenously distribute throughout the double perovskite crystals. Furthermore, we observe a strong temperature-dependent magnetic response at temperatures below 30 K, which is tentatively attributed to a weak ferromagnetic or antiferromagnetic response from localized regions. We anticipate that this work will stimulate future efforts in exploring this simple yet efficient approach to develop new spintronic materials based on lead-free double perovskites.

36 MATERIALS SCIENCE↗

DOE OSTI2020

Contrasting SnTe–NaSbTe 2 and SnTe–NaBiTe 2 Thermoelectric Alloys: High Performance Facilitated by Increased Cation Vacancies and Lattice Softening

Defect chemistry is critical to designing high performance thermoelectric materials. In SnTe, the naturally large density of cation vacancies results in excessive hole doping and frustrates the ability to control the thermoelectric properties. Yet, recent work also associates the vacancies with suppressed sound velocities and low lattice thermal conductivity, underscoring the need to understand the interplay between alloying, vacancies, and the transport properties of SnTe. Here, we report solid solutions of SnTe with NaSbTe 2 and NaBiTe 2 (NaSn m SbTe m +2 and NaSn m BiTe m +2 , respectively) and focus on the impact of the ternary alloys on the cation vacancies and thermoelectric properties. We find introduction of NaSbTe 2 , but not NaBiTe 2 , into SnTe nearly doubles the natural concentration of Sn vacancies. Furthermore, DFT calculations suggest that both NaSbTe 2 and NaBiTe 2 facilitate valence band convergence and simultaneously narrow the band gap. These effects improve the power factors but also make the alloys more prone to detrimental bipolar diffusion. Indeed, the performance of NaSn m BiTe m +2 is limited by strong bipolar transport and only exhibits modest maximum ZTs ≈ 0.85 at 900 K. In NaSn m SbTe m +2 however, the doubled vacancy concentration raises the charge carrier density and suppresses bipolar diffusion, resulting in superior power factors than those of the Bi-containing analogues. Lastly, NaSbTe 2 incorporation lowers the sound velocity of SnTe to give glasslike lattice thermal conductivities. Facilitated by the favorable impacts of band convergence, vacancy-augmented hole concentration, and lattice softening, NaSn m SbTe m +2 reaches high ZT ≈ 1.2 at 800–900 K and a competitive average ZT avg of 0.7 over 300–873 K. The difference in ZT between two chemically similar compounds underscores the importance of intrinsic defects in engineering high-performance thermoelectrics.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

DOE OSTI2020

Pressure-Induced Superconductivity in the Wide-Band-Gap Semiconductor Cu 2 Br 2 Se 6 with a Robust Framework

We report pressure-induced superconductivity in a ternary and nonmagnetic Cu-containing semiconductor, Cu 2 Br 2 Se 6 , with a wide band gap of 1.89 eV, in which the Cu and Br atoms generate infinite 2, helical chains along the c-axis and are linked by the cyclohexane-like Se 6 rings to form a three-dimensional framework. We find that this framework is remarkably robust under compression, and the ambient-pressure phase survives at least to our experimental limit of 32.1 GPa. Concurrent semiconductor-to-metal transition and superconductivity are observed above 21.0 GPa. The superconducting temperature monotonically increases from 4.0 to 6.7 K at 40.0 GPa. Furthermore, first-principles calculations show that the emergence of superconductivity is associated with the formation of weak multicentered bonds that involve the increase in coordination of the Cu atoms and a subset of the Se atoms. The observation of superconductivity in this type of nonmagnetic transition-metal-based material will inspire the exploration of related new superconductors under pressure.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗

DOE OSTI2020

The Subchalcogenides Ir 2 In 8 Q (Q = S, Se, Te): Dirac Semimetal Candidates with Re-entrant Structural Modulation

Subchalcogenides are uncommon compounds where the metal atoms are in unusually low formal oxidation states. They bridge the gap between intermetallics and semiconductors and can have unexpected structures and properties because of the exotic nature of their chemical bonding as they contain both metal–metal and metal–main group (e.g., halide, chalcogenide) interactions. Finding new members of this class of materials presents synthetic challenges as attempts to make them often result in phase separation into binary compounds. We overcome this difficulty by utilizing indium as a metal flux to synthesize large (millimeter scale) single crystals of novel subchalcogenide materials. Herein, we report two new compounds Ir 2 In 8 Q (Q = Se, Te) and compare their structural and electrical properties to the previously reported Ir 2 In 8 S analogue. Ir 2 In 8 Se and Ir 2 In 8 Te crystallize in the $P_{4_2}$/mnm space group and are isostructural to Ir2In8S, but also have commensurately modulated (with q vectors q = 1/6a* + 1/6b* and q = 1/10a* + 1/10b* for Ir 2 In 8 Se and Ir 2 In 8 Te, respectively) low-temperature phase transitions, where the chalcogenide anions in the channels experience a distortion in the form of In–Q bond alternation along the ab plane. Both compounds display re-entrant structural behavior, where the supercells appear on cooling but revert to the original subcell below 100 K, suggesting competing structural and electronic interactions dictate the overall structure. Notably, these materials are topological semimetal candidates with symmetry-protected Dirac crossings near the Fermi level and exhibit high electron mobilities (~1500 cm 2 V –1 s –1 at 1.8 K) and moderate carrier concentrations (~10 20 cm –3 ) from charge transport measurements. This work highlights metal flux as a synthetic route to high quality single crystals of novel intermetallic subchalcogenides with Dirac semimetal behavior.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

DOE OSTI2020

Study of Polycrystalline Bulk Sr 3 OsO 6 Double-Perovskite Insulator: Comparison with 1000 K Ferromagnetic Epitaxial Films

Polycrystalline Sr 3 OsO 6 , which is an ordered double-perovskite insulator, is synthesized via solid-state reaction under high-temperature and high-pressure conditions of 1200 ° C and 6 GPa. The synthesis enables us to conduct a comparative study of the bulk form of Sr3OsO6 toward revealing the driving mechanism of 1000 K ferromagnetism, which has recently been discovered for epitaxially grown Sr 3 OsO 6 films. Unlike the film, the bulk is dominated by antiferromagnetism rather than ferromagnetism. Thus, robust ferromagnetic order appears only when Sr 3 OsO 6 is under the influence of interfaces. A specific heat capacity of 39.6(9) X 10 -3 J mol -1 K -2 is found at low temperatures (<17 K). This value is remarkably high, suggesting the presence of possible Fermionic-like excitations at the magnetic ground state. While the bulk and film forms of Sr 3 OsO 6 share the same lattice basis and electrically insulating state, the magnetism is entirely different between them.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗