Search NASA⌕ Search

Engineering topics

Chung, In

Publications and source records attributed to Chung, In.

Chemical control of the Rashba spin splitting size of α-GeTe(111) surface states by adjusting the potential at the topmost atomic layer

As control of the Rashba spin splitting size is highly desirable for spintronic devices, intensive studies have been performed to vary the splitting size by, for example, applying an electric field or designing novel heterostructures. However, direct observation of Rashba spin splitting size change via spectroscopic measurements has not been done so far. Here, we report results of angle-resolved photoemission studies on ferroelectric α-GeTe(111). We observe that the Rashba splitting size of α-GeTe(111) surface states is reduced upon dosing with potassium (K) which has a very low electron affinity. Based on density functional theory calculations, we find that the electric potential energy at the topmost atomic layer and the surface potential energy barrier is reduced upon K dosing. Furthermore, this change in the surface potential induces both delocalization of the surface states and reduction of the splitting size. We expect to increase the splitting size by dosing other elements or molecules with high electron affinity.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗

Air-Stable Direct Bandgap Perovskite Semiconductors: All-Inorganic Tin-Based Heteroleptic Halides A x SnCl y I z (A = Cs, Rb)

Semiconducting halide perovskites are a group of materials with exciting photoelectronic properties. Compared to the widely studied hybrid organic–inorganic perovskites, the all-inorganic derivatives are less well understood even as they promise high inherent stability. At the moment, such materials are limited due to the fact that there is a very narrow choice of inorganic cations that can stabilize the desirable perovskite structure. Herein we report on the synthesis and characterization of novel all-inorganic tin-based perovskites and perovskitoids that can be stabilized by the heteroleptic coordination of chloride and iodide anions, Cs 2 SnCl 2 I 2 ( 1 ) and Cs 2.38 Rb 1.62 Sn 3 Cl 8 I 2 ( 2 ), consist of two-dimensional (2D) layers of [SnCl 4 I 2 ] 4– octahedra with different connectivity modes. Compound 1 is an n = 1 Ruddlesden–Popper type perovskite adopting the tetragonal archetype structure ( I 4/ mmm space group; a = 5.5905(3) Å, c = 18.8982(13) Å), while compound 2 crystallizes as an orthorhombic modification ( Cmcm space group; a = 5.6730(11) Å, b = 25.973(5) Å, c = 16.587(3) Å) with corrugated layers. The crystal chemistry changes drastically when Cs + is replaced by the smaller Rb + cation which leads to the isolation of the low dimensional compounds Rb 3 SnCl 3 I 2 ( 3a ), Rb 3 SnCl 2.33 I 2.67 ( 3b ) and Rb 7 Sn 4.25 Cl 12 I 3.5 ( 4 ), thus illustrating the importance of the A-cation size in the formation of perovskites. The 2D perovskites show wide band gaps and relatively large resistivities, associated with their chemical stability against the oxidation of Sn 2+ . The chemical stability is coupled with remarkable electronic properties that derive from the perovskite structure. DFT calculations suggest that both compounds are direct band gap semiconductors with large bandwidths, consistently with the experimentally determined band gaps of E g = 2.62 and 2.81 eV for 1 and 2 , respectively. The combination of stability and favorable electronic structure in heteroleptic-halide perovskites presents a new direction toward the realization of functional devices made exclusively from inorganic perovskites.

36 MATERIALS SCIENCE↗

Liquid electrolyte-free, solid-state solar cells with inorganic hole transport materials

Photovoltaic cells incorporating the compounds A/M/X compounds as hole transport materials are provide. The A/M/X compounds comprise one or more A moieties, one or more M atoms and one or more X atoms. The A moieties are selected from organic cations and elements from Group 1 of the periodic table, the M atoms are selected from elements from at least one of Groups 3, 4, 5, 13, 14 or 15 of the periodic table, and the X atoms are selected from elements from Group 17 of the periodic table.

14 SOLAR ENERGY↗

Na{sub 2}Ge{sub 2}Se{sub 5}: A highly nonlinear optical material

We report an integrated experimental and theoretical study of the two-dimensional polar selenogermanate compound Na{sub 2}Ge{sub 2}Se{sub 5}, which exhibits strong nonlinear optical (NLO) second harmonic generation response in the visible and infrared region. The compound is type-I phase-matchable with a large SHG coefficient {chi}{sup (2)} Almost-Equal-To 290 pm V{sup -1}, which is the second highest among the phase-matchable NLO materials. It also performs as an NLO frequency mixer to produce radiation via difference frequency generation. The compound is optically transparent from the visible (0.521 {mu}m) to the far IR (18.2 {mu}m) and melts congruently. Ab initio density functional theory band structure calculations show that the unusually large second-order optical nonlinearity is attributed to the two-dimensional character of the crystal structure. Raman, IR and optical absorption spectroscopy, differential thermal analysis, NLO properties of derivatives of Na{sub 2}Ge{sub 2}Se{sub 4.55}Te{sub 0.45} and Na{sub 2}Ge{sub 1.64}Sn{sub 0.36}Se{sub 5} and thermal expansion behavior studies are also reported. - Graphical Abstract: Na{sub 2}Ge{sub 2}Se{sub 5} is a new second-order nonlinear optical material for IR applications. It is type-I phase-matchable with a large SHG coefficient {chi}{sup (2)} Almost-Equal-To 290 pm V{sup -1}, which is the second largest among the phase-matchable NLO materials. Highlights: Black-Right-Pointing-Pointer Na{sub 2}Ge{sub 2}Se{sub 5} is a new second-order nonlinear optical material for IR applications. Black-Right-Pointing-Pointer It is type-I phase-matchable. Black-Right-Pointing-Pointer Its SHG coefficient {chi}{sup (2)} Almost-Equal-To 290 pm V{sup -1} is the second largest among the phase-matchable NLO materials. Black-Right-Pointing-Pointer Its DFG performance allows the development of a multiple IR frequency source with tunability. Black-Right-Pointing-Pointer Ab initio density functional theory band structure calculations show that the unusually large second-order optical nonlinearity is attributed to the 2-D character of the crystal structure.

36 MATERIALS SCIENCE↗

CsSnI[subscript 3]: Semiconductor or Metal? High Electrical Conductivity and Strong Near-Infrared Photoluminescence from a Single Material. High Hole Mobility and Phase-Transitions

CsSnI{sub 3} is an unusual perovskite that undergoes complex displacive and reconstructive phase transitions and exhibits near-infrared emission at room temperature. Experimental and theoretical studies of CsSnI{sub 3} have been limited by the lack of detailed crystal structure characterization and chemical instability. Here we describe the synthesis of pure polymorphic crystals, the preparation of large crack-/bubble-free ingots, the refined single-crystal structures, and temperature-dependent charge transport and optical properties of CsSnI{sub 3}, coupled with ab initio first-principles density functional theory (DFT) calculations. In situ temperature-dependent single-crystal and synchrotron powder X-ray diffraction studies reveal the origin of polymorphous phase transitions of CsSnI{sub 3}. The black orthorhombic form of CsSnI{sub 3} demonstrates one of the largest volumetric thermal expansion coefficients for inorganic solids. Electrical conductivity, Hall effect, and thermopower measurements on it show p-type metallic behavior with low carrier density, despite the optical band gap of 1.3 eV. Hall effect measurements of the black orthorhombic perovskite phase of CsSnI{sub 3} indicate that it is a p-type direct band gap semiconductor with carrier concentration at room temperature of {approx} 10{sup 17} cm{sup -3} and a hole mobility of {approx} 585 cm{sup 2} V{sup -1} s{sup -1}. The hole mobility is one of the highest observed among p-type semiconductors with comparable band gaps. Its powders exhibit a strong room-temperature near-IR emission spectrum at 950 nm. Remarkably, the values of the electrical conductivity and photoluminescence intensity increase with heat treatment. The DFT calculations show that the screened-exchange local density approximation-derived band gap agrees well with the experimentally measured band gap. Calculations of the formation energy of defects strongly suggest that the electrical and light emission properties possibly result from Sn defects in the crystal structure, which arise intrinsically. Thus, although stoichiometric CsSnI{sub 3} is a semiconductor, the material is prone to intrinsic defects associated with Sn vacancies. This creates highly mobile holes which cause the materials to appear metallic.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Strongly Nonlinear Optical Glass Fibers from Noncentrosymmetric Phase-Change Chalcogenide Materials

We report that the one-dimensional polar selenophosphate compounds APSe{sub 6} (A = K, Rb), which show crystal-glass phase-change behavior, exhibit strong second harmonic generation (SHG) response in both crystal and glassy forms. The crystalline materials are type-I phase-matchable with SHG coefficients {chi}{sup (2)} of 151.3 and 149.4 pm V{sup -1} for K{sup +} and Rb{sup +} salts, respectively, which is the highest among phase-matchable nonlinear optical (NLO) materials with band gaps over 1.0 eV. The glass of APSe{sub 6} exhibits comparable SHG intensities to the top infrared NLO material AgGaSe{sub 2} without any poling treatments. APSe{sub 6} exhibit excellent mid-IR transparency. We demonstrate that starting from noncentrosymmetric phase-change materials such as APSe{sub 6} (A = K, Rb), we can obtain optical glass fibers with strong, intrinsic, and temporally stable second-order nonlinear optical (NLO) response. The as-prepared glass fibers exhibit SHG and difference frequency generation (DFG) responses over a wide range of wavelengths. Raman spectroscopy and pair distribution function (PDF) analyses provide further understanding of the local structure in amorphous state of KPSe{sub 6} bulk glass and glass fiber. We propose that this approach can be widely applied to prepare permanent NLO glass from materials that undergo a phase-change process.

36 MATERIALS SCIENCE↗

The Tellurophosphate K[subscript 4]P[subscript 8]Te[subscript 4]: Phase-Change Properties, Exfoliation, Photoluminescence in Solution and Nanospheres

We describe the inorganic polymer K{sub 4}P{sub 8}Te{sub 4} which is soluble, giving solutions that exhibit white emission upon 355 nm laser irradiation. An indirect band gap semiconductor (E{sub g} {approx} 1.4 eV), K{sub 4}P{sub 8}Te{sub 4} crystallizes in the space group P2{sub 1}/m, with a = 6.946(1) {angstrom}, b = 6.555(1) {angstrom}, c = 9.955(2) {angstrom}, and {beta} = 90.420(3){sup o} at 173(2) K. The compound features infinite chains of [P{sub 8}Te{sub 4}{sup 4-}] with covalent P-Te bonding and exhibits reversible crystal-glass phase-change behavior. When deposited from solution, the material forms highly crystalline K{sub 4}P{sub 8}Te{sub 4} nanospheres. The thermal analysis, FT-IR, UV-vis diffuse reflectance, {sup 31}P magic angle spinning solid-state NMR spectroscopy, and pair distribution function (PDF) analysis for the crystal and glass forms and ab initio electronic structure calculations by the screened-exchange local density function approximation are also reported. Speciation of K{sub 4}P{sub 8}Te{sub 4} in solution studied with {sup 31}P solution-state NMR spectroscopy, electrospray ionization mass spectrometry, and PDF analysis indicate exfoliation of [P{sub 8}Te{sub 4}{sup 4-}] chains followed by rearrangement into molecular species.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗