Search NASA⌕ Search

Engineering topics

Churchfield, Matthew

Publications and source records attributed to Churchfield, Matthew.

At least 19 records

Recommendations on setup in simulating atmospheric gravity waves under conventionally neutral boundary layer conditions

Wind farm-induced atmospheric gravity waves have been the subject of recent research as they can impact wind farm performance. Pressure variations associated with gravity waves can contribute to the global blockage effect and wind farm wake recovery. Therefore, accurate numerical simulation of flow fields, where wind-farm-induced gravity waves may be produced, is important. Three main considerations in such simulations are the overall domain size, the use of Rayleigh damping near domain boundaries to dampen gravity waves, and advection damping at the inlet to prevent spurious oscillations. Often these considerations are treated ad hoc rather than systematically. This work aims to test and extend the systematic modelling of internal gravity waves proposed in a preliminary investigation to modelling of both internal and trapped gravity waves. The preliminary study identifies the length scales to set the domain and damping layer sizes and the time scale to configure the Rayleigh damping coefficient but under linearly stratified conditions. Large eddy simulations of flow through a wind farm canopy are performed under conventionally neutral boundary layer (CNBL) conditions to test the validity of proposed setups for CNBL conditions. Background atmospheric parameters, such as Froude number (Fr), inversion height (H i ), and inversion layer Froude number (Fr i ) control most of the atmospheric gravity wave characteristics. We validated for CBNL conditions that the effective wavelengths of the internal gravity waves are the correct length scale to configure the domain size and damping layer thickness. Likewise, the optimum damping coefficient to dampen the internal gravity waves relates to the free atmosphere's buoyancy frequency or buoyant perturbations' time scale. We infer that the damping coefficient in the inversion layer may relate to the inversion buoyancy frequency to effectively dampen the trapped gravity waves. Moreover, the advection damping length is linked to the horizontal wavelength of the trapped gravity waves in the inversion layer to prevent spurious waves at the inlet by retaining wave energy accumulation.

17 WIND ENERGY↗

Towards exascale for wind energy simulations

We examine large-eddy-simulation modeling approaches and computational performance of two open-source computational fluid dynamics codes for the simulation of atmospheric boundary layer flows that are of direct relevance to wind energy production. The first code, NekRS, is a high-order, unstructured-grid, spectral element code. The second code, AMR-Wind, is a second-order, block-structured, finite-volume code with adaptive mesh refinement capabilities. The objective of this study is to co-develop these codes in order to improve model fidelity and performance for each. These features will be critical for running ABL-based applications such as wind farm analysis on advanced computing architectures. To this end, we investigate the performance of NekRS and AMR-Wind on the Oak Ridge Leadership Facility supercomputers Summit, using 4 to 800 nodes (24 to 4,800 NVIDIA V100 GPUs), and Crusher, the testbed for the Frontier exascale system, using 18 to 384 Graphics Compute Dies on AMD MI250X GPUs. We compare strong- and weak-scaling capabilities, linear solver performance, and time to solution. We also identify leading inhibitors to parallel scaling.

17 WIND ENERGY↗

Offshore Wind Energy Validation Experiment Hierarchy

This paper provides a summary of planning work for experiments that will be necessary to address the long-term model validation needs required to meet offshore wind energy deployment goals. Conceptual experiments are identified and laid out in a validation hierarchy for both wind turbine and wind plant applications. Instrumentation needs that will be required for the offshore validation experiments to be impactful are then listed. The document concludes with a nominal vision for how these exp

Maniaci, David Charles↗

Observationally driven Resource Assessment with CoupLEd models (ORACLE)

This project seeks to carry out a multifaceted analysis combining buoy observations, machine learning, turbulence, satellite data and high-resolution modeling. Our analyses will investigate air–sea interaction physics governing the variation of the winds with height and influence of clouds, uncertainty in coupled ocean-wave-atmosphere mesoscale models to capture certain key atmospheric phenomenon observed over the U.S. West Coast, impact of climate change, and the fidelity with which resource characterization models describe the range of observed offshore wind conditions. This project will focus its efforts on characterizing and assessing the atmospheric and oceanographic conditions along the U.S. West Coast.

Wind, Energy↗

Lessons learned in coupling atmospheric models across scales for onshore and offshore wind energy

Abstract. The Mesoscale to Microscale Coupling team, part of the U.S. Department of Energy Atmosphere to Electrons (A2e) initiative, has studied various important challenges related to coupling mesoscale models to microscale models for the use case of wind energy development and operation. Several coupling methods and techniques for generating turbulence at the microscale that is subgrid to the mesoscale have been evaluated for a variety of cases. Case studies included flat-terrain, complex-terrain, and offshore environments. Methods were developed to bridge the terra incognita, which scales from about 100 m through the depth of the boundary layer. The team used wind-relevant metrics and archived code, case information, and assessment tools and is making those widely available. Lessons learned and discerned best practices are described in the context of the cases studied for the purpose of enabling further deployment of wind energy.

17 WIND ENERGY↗

Investigation of Farm-to-Farm Interactions and Blockage Effects from AWAKEN using Large-Scale Numerical Simulations

A large-scale numerical computation of five wind farms was performed as a part of the American Wake Experiment (AWAKEN). This high-fidelity computation used the ExaWind/AMR-Wind LES solver to simulate a 100km × 100km domain containing 541 turbines under unstable atmospheric conditions matching previous measurements. The turbines were represented by Joukowski and OpenFAST coupled actuator disk models. Results of this qualitative comparison illustrate the interactions with wind farms with large scale ABL structures in the flow, as well as the extent of downstream wake penetration in the flow and blockage effects around wind farms.

Cheung, Lawrence C.↗

Investigations of correlation and coherence in turbulence from a large-eddy simulation

Abstract. Microscale flow descriptions are often given in terms of mean quantities, turbulent kinetic energy, and/or stresses. Those metrics, while valuable, give limited information about turbulent eddies and coherent turbulent structures. This work investigates the structure of an atmospheric boundary layer using coherence and correlation in space and time with a range of separation distances. We calculate spatial correlations over entire planes of velocity fluctuations, from which we can evaluate the correlation along different directions at different spacings. Similarly, coherence of the three velocity components over separations in the three directions is also investigated. We apply these analyses to a mesoscale–microscale coupled scenario with time-varying conditions and examine nuances in spatial correlations that are often overlooked. Through these analyses and results, this work highlights important differences observed in terms of coherence when comparing large-eddy simulation data to simpler models and suggests ways to improve these simpler models. We note that such differences are important for disciplines like wind energy structural dynamic analysis, in which blade loading and fatigue depend strongly on the structure of the turbulence. We emphasize the additional wealth of data that can be provided by typical atmospheric boundary layer large-eddy simulation when correlation and coherence analysis is included, and we also state the limitations of large-eddy simulation data, which inherently truncate the smaller scales of turbulence.

17 WIND ENERGY↗

Wind Farm Control and Layout Optimization for U.S. Offshore Wind Farms (Final Report - D5)

This report reviews the results and main conclusions of the NOWRDC project "Wind Farm Control and Layout Optimization for U.S. Offshore Wind Farms." A key finding is that wake steering should be considered a valuable tool for increasing the energy production of wind farms, especially in the event the farms are designed to maximize the energy production of a given boundary area.

17 WIND ENERGY↗

Curled-Skewed Wakes behind Yawed Wind Turbines Subject to Veered Inflow

This work presents a new engineering analytical model that predicts the effect of both the turbine yaw misalignment and the inflow wind veer on the wake flow distribution downwind of a wind turbine. To consider the veered inflow, two methods were examined. In the first method, the curled shape of the wake due to the yaw offset is initially modelled. The wake shape is then laterally skewed at each height due to the wind veer based on the assumption that the turbine wake is transported downstream by the incoming flow. The second method is a more realistic approach that accounts for the effect of wind veer on the wind velocity direction and the yaw angle seen by the wind turbine. This models the wake region in a local coordinate system defined based on the wind direction at each height. A coordinate transformation is then performed to represent the wake flow distribution in the global coordinate system attached to the ground. The results show that while the two methods provide similar outputs for small variations in the wind direction across the rotor, the difference becomes more evident with an increase in wind veer. High-fidelity simulations for a turbine subject to a neutral atmospheric boundary layer were employed to validate model predictions for different operating conditions.

17 WIND ENERGY↗

Evaluating Terrain as a Turbulence Generation Method

When driving microscale large-eddy simulations with mesoscale model solutions, turbulence will take space to develop, known as fetch, on the microscale domain. To reduce fetch, it is common to add perturbations near the boundaries to speed up turbulence development. However, when simulating domains over complex terrain, it is possible that the terrain itself can quickly generate turbulence within the boundary layer. It is shown here that rugged terrain is able to generate turbulence without the assistance of a perturbation strategy; however, the levels of turbulence generated are improved when adding perturbations at the inlet. Flow over smoothed, but not flat, terrain fails to generate adequate turbulence throughout the boundary layer in all tests conducted herein. Sensitivities to the strength of the mean wind speed and boundary layer height are investigated and show that higher wind speeds produce turbulence over terrain features that slower wind speeds do not. Further, by increasing the height of the capping inversion, the effectiveness of topography alone to generate turbulence throughout the depth of the boundary is diminished. In all cases, the inclusion of a perturbation strategy improved simulation performance with respect to turbulence development.

17 WIND ENERGY↗

Large-eddy simulations of the Northeastern US coastal marine boundary layer

In this study, large eddy simulations (LES) of offshore boundary layers near the Nantucket coast are performed using Nalu-Wind. The marine boundary layer conditions are chosen to match the predominantly unstable and neutral conditions measured by the Cape Wind platform. The appropriate domain, resolution, and boundary condition settings required for the LES are established through this work. Differences between stable and unstable cases are found in the wind speed profiles, averaged statistics, and wind spectra, and explained in terms of stratification effects.

54 ENVIRONMENTAL SCIENCES↗

Overview of FY20 Q2 milestone completion: Actuator Disk Improvements and Hardening PowerPoint]

Milestone Description: Enhance Nalu-Wind's actuator disc model through hardening, documenting, stress-testing, verifying, and validating. Existing workflows will be improved by reducing the data output stream, and by making the analysis capabilities more modular and generally better. These model capabilities are needed by other A2e areas, namely Wake Dynamics, AWAKEN, and VV&UQ.

36 MATERIALS SCIENCE↗

CEED-MS34: Improve performance and capabilities of CEED-enabled ECP applications on Summit/Sierra. Exascale Computing Project Milestone Report

The main goal of this milestone was to help CEED-enabled ECP applications, including ExaSMR, MARBL, ExaWind and ExaAM, to improve their performance and capabilities on GPU systems like Summit and Lassen/Sierra. In addition, the CEED team also worked to: add and improve support for additional hardware and programming models in the CEED software components; release the next version of the CEED software stack, CEED-3.0; and demonstrate performance of libParanumal kernels in libCEED, Nek and MFEM. These additional tasks contributed directly to the main CEED-MS34 goal and will also play an important role in CEED’s future milestones.

97 MATHEMATICS AND COMPUTING↗

Mesoscale to Microscale Coupling for Wind Energy Applications: Addressing the Challenges

The purpose of the US DOE's Mesoscale to Microscale Coupling (MMC) Project is to develop, verify, and validate physical models and modeling techniques that bridge the most important atmospheric scales that determine wind plant performance and reliability. The project seeks to create a new predictive numerical simulation capability that represents a range of dynamic atmospheric flow conditions impacting wind plant performance.

17 WIND ENERGY↗

Large-Eddy Simulations of Idealized Atmospheric Boundary Layers Using Nalu-Wind

Accurate prediction of wind-plant performance relies, in part, on properly characterizing the turbulent atmospheric boundary layer (ABL) flow in which wind turbines operate. Large-eddy simulation (LES) is a powerful tool for simulating ABLs because it resolves the largest, most energetic scales of three-dimensional turbulent motions. Yet LES predictions are well known to depend on modeling choices such as grid resolution, numerical discretization schemes, and closures for unresolved scales of turbulence. Here, we evaluate how these choices influence predictions of ABL winds using Nalu-Wind, a wind-specific fork of the open-source, generalized, unstructured, massively parallel flow solver NaluCFD/Nalu.

17 WIND ENERGY↗