Engineering topics
Chuvatin, A S
Publications and source records attributed to Chuvatin, A S.
Analysis of Precursor Properties of mixed Al/Alumel Cylindrical Wire Arrays.
Abstract Not Provided
Analysis of Ni-60 Alloy Precursor Wire Array Experiments on the 1.7 MA Zebra Generator at UNR.
Abstract Not Provided
Radiative Properties of Mixed Nested Cylindrical Wire Arrays on Zebra at UNR.
Abstract Not Provided
Planar Wire-Array Z-Pinch Implosion Dynamics and X-Ray Scaling at Multiple-MA Drive Currents for a Compact Multisource Hohlraum Configuration
An indirect drive configuration is proposed wherein multiple compact Z-pinch x-ray sources surround a secondary hohlraum. Planar compact wire arrays allow reduced primary hohlraum surface area compared to cylindrical loads. Implosions of planar arrays are studied at up to 15 TW x-ray power on Saturn with radiated yields exceeding the calculated kinetic energy, suggesting other heating paths. X-ray power and yield scaling studied from 1-6 MA motivates viewfactor modeling of four 6-MA planar arrays producing 90 eV radiation temperature in a secondary hohlraum.
Planar Wire Array Dynamics and Radiation Scaling at Multi-MA Levels on the Saturn Pulsed Power Generator
Planar wire arrays are studied at 3-6 MA on the Saturn pulsed power generator as potential drivers of compact hohlraums for inertial confinement fusion studies. Comparison with zero-dimensional modeling suggests that there is significant trailing mass. The modeled energy coupled from the generator cannot generally explain the energy in the main x-ray pulse. Preliminary comparison at 1-6 MA indicates sub-quadratic scaling of x-ray power in a manner similar to compact cylindrical wire arrays. Time-resolved pinhole images are used to study the implosion dynamics.
Physics of Multi-Planar and Compact Cylindrical Wire Arrays Implosions on University-Scale Z-pinch Generators
The presented research focuses on investigation of Z-pinch plasma formation, implosion, and radiation characteristics as a function of the load configuration. The single planar and multi-planar wire arrays as well as compact cylindrical wire arrays were studied on the 1.3 MA UNR Zebra and 1 MA Cornell COBRA generators. The largest yields and powers were found for W and Mo double planar and compact wire arrays. A possibility of radiation pulse shaping was demonstrated. Two types of bright spots were observed in plasmas. A comparison of Mo double planar and compact wire array data indicates the possibility that the same heating mechanism operates during the final implosion and stagnation stages.
Scaling of Radiation Parameters of Planar and Compact Cylindrical Wire Arrays at the 1 MA Zebra Generator
Analysis is presented on scaling of radiated x-ray power, energy and implosion timing of single planar wire arrays (SPWA), double planar wire array (DPWA), and compact cylindrical wire array (CCWA) loads (diameter is 3 and 6 mm) of Mo and W with respect to current peak (0.8-1.4 MA), mass and array dimensions at 100 ns current pulse. Such scaling investigations are important for understanding the potential of these loads as an ICF radiation source{sup 7}. These data are used to identify promising directions to pursue with regard to highest x-ray output, smallest load size, and most consistent shot-to-shot performance. It is shown that W SPWA and DPWA total energy yield and peak power increased near-quadratically with current. DPWA scans of inter-planar gaps from 1.5 mm to 9 mm show an output maximum at 1.5 mm with decreasing output for 6 mm and 9 mm. A DPWA width scan shows that radiation yields decrease slowly as the width is decreased, which may allow for more compact loads without significant sacrifice to the output radiation. A mass scan of several W loads show that the implosion timing increases with mass.
Design and Testing of a Load Current Multiplier on Zebra Facility
The Load Current Multiplier concept (LCM) was validated for the first time on a high-voltage nanosecond pulse-power generator. The designed new device allowed to increase the load current from the nominal 0.8-0.9 MA up to 1.6 MA in static loads with constant inductance and up to 1.4 MA in a planar wire-array plasma loads. These results were achieved without modifying the generator energetic or architecture. LCM allowed both the load magnetic energy increase and the increase of soft X-ray radiation from z-pinch plasmas.
Double planar wire array as a compact plasma radiation source
Magnetically compressed plasmas initiated by a double planar wire array (DPWA) are efficient radiation sources. The two rows in a DPWA implode independently and then merge together at stagnation producing soft x-ray yields and powers of up to 11.5 kJ/cm and more than 0.4 TW/cm, higher than other planar arrays or low wire-number cylindrical arrays on the 1 MA Zebra generator. DPWA, where precursors form in two stages, produce a shaped radiation pulse and radiate more energy in the main burst than estimates of implosion kinetic energy. High radiation efficiency, compact size (as small as 3-5 mm wide), and pulse shaping show that the DPWA is a potential candidate for ICF and radiation physics research.